journal article·2001-01

Liquid-phase sintering from the high-temperature corrosion process standpoint

Eugene Medvedovski

Materials Chemistry and Physics· Volume 67· Issue 1-3
Publisher page

Abstract

The solution-precipitation processes of liquid-phase sintering are very essential because they effect not only the sintering state of ceramics, but also their phase composition and microstructure. These processes may be considered from the high-temperature corrosion standpoint, i.e. solid particles are effected by very active melt (in many cases, molten silicates) at high temperature. In this case, some mathematical expressions from the corrosion process of refractories in molten metals, slags, and glasses may be utilized; however, small particle size of the solid and anisothermal conditions should be taken into consideration. The essential factors that determine the solution-precipitation of liquid-phase sintering are the temperature of the liquid phase formation, the change of composition and structure of liquid phase with increase in temperature, and also the initial conditions of the solids.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Iron and Steelmaking Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. W.D. Kingery, H.K. Bowen, D.R. Uhlmann, Introduction to Ceramics, 2nd Edition, New York, John Wiley & Sons, Inc., 1976.
2. Ya.E. Geguzin, Physics of Sintering, Moscow, Nanka (Science), 1984 (in Russian).
3. W.J. Huppman, G. Petzow, The elementary mechanisms of liquid phase sintering, in: Sintering Process, Proceedings of the Fifth International Conference in Sintering and Related Phenomena, Notre Dame, IN, June 18–20, 1979, New York, London, 1980, pp. 189–201.10.1007/978-1-4899-5301-8_17 ↗
4. L.N. Sheludyakov, Composition, Structure, and Viscosity of Homogeneous Silicate and Alumina–Silicate Melts, Alma-Ata, 1980, Nanka (Science), (in Russian).
5. V.N. Anfilogov, I.B. Bobilev, Silicate melts as molten polyelectrolytes, Geochemistry 9 (1980) 1298–1307 (in Russian).
6. K.K. Strelov, Structure and Properties of Refractories, 2nd Edition, Moscow, 1982, Metallurgy (in Russian).
7. R. Brukner, Werhselwirkungen Zwischen Glasschmelze und Feuerfestmaterial, Glastechn. Ber. 53 (4) (1980) 77–88 (in German).
8. A.K. Karklit, L.A. Tikhonova, Refractories from High-Alumina Raw Materials, Moscow, 1974, Metallurgy (in Russian).
9. F.Ya. Kharitonov, E.Ya. Medvedovski, Ceramics in the corrosive environment, in: Chemistry and Technology of Silicates and Heat-Resistant Non-Metallic Materials, Moscow, 1989, Nanka (Science), pp. 141–145 (in Russian).
10. N.S. Kostyukov, E.Ya. Medvedovski, F.Ya. Kharitonov, Electroinsulating Corundum-Mullite Ceramics, Vladivostok, 1988 (in Russian).
11. E.Ya. Medvedovski, F.Ya. Kharitonov, M.V. Glazacheva, et al., Expansion of the sintered-state range for high-alumina electroinsulating ceramics, Glass Ceram. 3 (1986) 24–25 (in Russian).
12. V.M. Gropyanov, V.S. Bessmertny, V.N. Zernov, et al., Study of the glassy phase formation in silicate-based ceramics, J. Appl. Chem. 56 (12) (1983) 2745–2747 (in Russian).
13. Progress in glass making refractories