journal article·2007-05

Microstructure and phase constituents near the fusion zone of Fe3Al/Cr–Ni alloys joints produced by MAW

Haijun Ma, Yajiang Li, S.A. Gerasimov, Juan Wang

Materials Chemistry and Physics· Volume 103· Issue 1
Publisher page

Abstract

Abstract A series of Cr–Ni alloys were deposited on the Fe 3 Al surface by manual arc welding (MAW) technology to study the weldability of this intermetallic. The results indicated that Fe 3 Al performed bad weldability for Cr18–Ni8 and Cr18–Ni13 alloys but good for Cr25–Ni13 alloy. Subsequently, the microstructural morphology, elements distribution and phase constituents near the fusion zone of Fe 3 Al/Cr25–Ni13 alloys joints were analysed by means of metalloscope, SEM, EPMA and XRD. The matrix of Cr25–Ni13 surface layer was austenite (A). The pro-eutectoid ferrite (PF), upper and lower bainite (UB and LB), lath martensite (LM) and tiny dispersed carbide distributed on the austenitic grain boundaries as well as grains inside. There distributed some Al 2 O 3 tiny granules near the fusion zone, contributing to the non-equilibrium nucleation of fine fusion zone grains. The phase constituents near the fusion zone were Fe 3 Al, FeAl, Fe 2 Al 5 , γ-(Fe, C), γ-(Fe, Ni), NiAl, an Fe–C compound and the Fe–Cr–C compound (Cr 9 Fe) 7 C 3 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Mechanical alloying of Fe–Al intermetallics in the DO3 composition range10.1007/BF00351317 ↗
2. A review of recent development in Fe3Al-based alloys10.1557/JMR.1991.1779 ↗
3. Melting and casting of FeAl-based cast alloy
4. Effect of alloying additions on sea water corrosion resistance of Fe–Al base alloys10.5006/0010-9312-30.10.357 ↗
5. Influence of humidity on the room temperature tensile properties of Fe3Al-based alloys10.1016/0956-716X(94)90564-9 ↗
6. Hydrogen embrittlement of Fe3Al alloys10.1016/0921-5093(94)03240-8 ↗
7. Heat treatment effects for improved reep-rupture resistance of Fe3Al-based alloy10.1016/S0966-9795(97)00104-0 ↗
8. Weldability of Fe3Al-type aluminide
9. Characterization of interface in diffusion bonded Fe3Al/Q235 carbon steel dissimilar material10.1179/026708303225008653 ↗
10. Microstructure and oxidation resistance of Fe3Al overlay by manual arc surfacing