Synthesis and characterization of 9.5/65/35 PLZT prepared from the polymeric precursors
Source abstract
Abstract
The 9.5/65/35 PLZT was prepared from the polymeric precursors (the Pechini and partial oxalate process) and by sintering in two stages in an oxygen atmosphere. After thermal treatment at 400°C, the powders were calcinated and sintered at 1200°C with slow heating and cooling rates. The second stage of sintering consisted of hot pressing at the same temperature in oxygen atmosphere. After calcination of PLZT powders obtained by both methods, as well as after sintering of PLZT obtained by Pechini process, the paraelectric cubic phase was formed. After sintering of PLZT obtained by partial oxalate procedure, small tetragonality of crystal structure was observed. After hot pressing PLZT was pseudocubic. SEM microstructural analyses were carried out of the sintering and hot pressed samples and indicated the small grain size less than 2 μm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Acoustic Wave Resonator Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. G.H. Hertling, Electrooptic Ceramic and Devices, in: Proceedings of the SID, Vol. 137, San Francisko, 1989.
2. G.H. Hertling, in: T.S. Ien, J. Pask (Eds.), Processing of Transparent Electrooptic Ceramic, Science Press, Beijing, China, 1984, p. 25.
3. Hertling · J. Am. Ceram. Soc. · 1971 · 54 · 110.1111/j.1151-2916.1970.tb12105.x-i1 ↗
4. B. Stojanovic, M. Kosec, J. Pirs, in: Ceramics for Electronics, II Part, Pub. Pardubice, 1988, p. 138.
5. G.H. Hertling, in: T.S. Ien, J. Pask (Eds.), Processing of Transparent Electrooptic Ceramic, Science Press, Beijing, China, 1984, p. 68.
6. J.R. Maldonado, A.H. Metzler, Proc. IEEE 59 (1981) 368.10.1109/PROC.1971.8178 ↗
7. Hertling · Ferroelectrics · 1972 · 3 · 26910.1080/00150197208235318 ↗
8. C.E. Land, P.D. Thacher, in: The Physics of Opto electronic Materials, Plenum Press, New York, 1978, p. 169.
9. Brown · J. Am. Ceram. Soc. · 1981 · 64 · 42210.1111/j.1151-2916.1981.tb09883.x ↗
10. Thomson · Bull. Am. Ceram. Soc. · 1974 · 53 · 421
11. Murata · Mat. Res. Bull. · 1976 · 11 · 32310.1016/0025-5408(76)90198-7 ↗
12. Yin · Ferroelectrics · 1981 · 35 · 16110.1080/00150198108017680 ↗
13. Okazaki · J. Jpn. Soc. Powder Metal. · 1978 · 25 · 310.2497/jjspm.25.147 ↗
14. Mazadiyasni · Ceram. Int. · 1982 · 8 · 4210.1016/0272-8842(82)90014-1 ↗
15. M. Kosec, D. Kolar, B.D. Stojanovic, in: Proceedings of the Symposium of Science of Ceramics, 1985, p. 182.
16. Kagegawa · J. Am. Ceram. Soc. · 1988 · 71 · C49
17. G.H. Hertling, in: T.S. Ien, J. Pask (Eds.), Processing of Transparent Electrooptic Ceramic, Science Press, Beijing, China, 1984, pp. 35–49.
18. Leite · J. Am. Ceram. Soc · 1996 · 79 · 156310.1111/j.1151-2916.1996.tb08765.x ↗
19. Cerqueira · Mater. Lett. · 1998 · 166 · 71
20. Braga · Ceramica · 1996 · 42 · 276
21. M.P. Pechini, US Patent 33069 (1969).
22. Stojanovic · Ceramic International · 2000 · 26 · 62510.1016/S0272-8842(99)00107-8 ↗