journal article·2001-01

Problem solving in sintering of tungsten heavy alloy product — a case study

T.P Bagchi, N Arvind Kumar, Bijoy Sarma, N Maitra

Materials Chemistry and Physics· Volume 67· Issue 1-3
Publisher page

Abstract

The authors in DMRL are engaged for last three decades in development and production of a repertoire of tungsten heavy alloy products mainly for defence applications where stringent quality control is imperative. An exhaustive knowledge-base has been built over the years with inputs from literature and in-house use R&D. This knowledge-base generally ensures continuous and smooth production of quality products. But, there was a case where this knowledge-base of sintering had been proved to be incapable of ascertaining and solving certain production problem. This particular problem was analysed and solved by Ishikawa technique. Based on the experience, the authors advocate that the knowledge of different statistical and problem solving tools is essential in the field of powder metallurgy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Statistical process control — a problem solving tool
2. M.W. Lindsay, in: E.A. Carlson, G. Gaines (Eds.), SPC for P/M Industry: An Overview, Prog. Powder Metallurgy 42 (1986) 691–699.
3. G.E. Meek, K.A. Dunning, in: E.A. Carlson, G. Gaines (Eds.), Bivariate Control Charts in P/M Manufacturing, Prog. Powder Metallurgy 42 (1986) 701–712.
4. W.C. Muller, in: E.A. Carlson, G. Gaines (Eds.), SPC: Central Factor in Achieving & Maintaining Supplier Self-Certification, Prog. P/M 42 (1986) 713–719.
5. Application of statistical process control in powder metal part manufacturing process
6. Statistical process control — a solid improvement strategy
7. SPC in steel powder manufacturing
8. Application of statistical process control in powder metal part manufacturing process
9. E.A. Rasmussen, D.C. Zenger, Implementing statistical process control for powder component production, Adv. Powder Metallurgy Particulate Mater. (1994), in: C. Lall, A.J. Neupaver (Comps.), Characterization, Testing and Quality Control, Metal Powder Industries Federation, APMI International, Princeton, NJ, USA, pp. 249–262.
10. R. Everett, Statistical problem solving in the P/M industry, Adv. Powder Metallurgy Particulate Mater. (1994), in: C. Lall, A.J. Neupaver (Comps.), Characterization, Testing and Quality Control, Metal Powder Industries Federation, APMI International, Princeton, NJ, USA, pp. 263–276.
11. C.I. Whitman, An Introduction to Advanced Problem Solving Techniques for Powder Metallurgy: A New Strategy for Experimentation and Data Analysis Using the PC, Metal Powder Industries Federation, Princeton, USA, 1994.
12. D.J. Kasputis, H.S. Shaw, R.J. Causton, P.J. McGeehan, F.J. Lipka, Continuous improvements in atomised powders through team-oriented problem solving, Adv. Powder Metallurgy Particulate Mater. 1 (1994), in: C. Lall, A.J. Neupaver (Comps.), Powder Manufacturing and Industry Trends, Metal Powder Industries Federation and APMI International, Princeton, NJ, USA, pp. 55–66.
13. K. Ganapathy, V. Narayana, B. Subramanian, Problem Solving Techniques (a set of ten booklets): (i) Data Collection, (ii) Histogram, (iii) Stratification, (iv) Scatter Diagram, (v) Cause-&-Effect (or Fishbone) Diagram, (vi) Pareto Diagram, (vii) Graphs, (viii) Control Chart, (ix) Brain Storming and (x) Flow Diagram, Quality Circle Forum of India, Secunderabad, 1994.
14. S. Isserow, Ordnance Applications, Vol. 7, Metals Handbook, Powder Metallurgy, 9th Edition, American Society for Metals, OH, 1984, p. 691.
15. E.L. Grant, R.S. Leavenworth, Statistical Quality Control, 6th Edition, McGraw-Hill, New York, 1988.
16. D.C. Montgomery, Introduction to Statistical Quality Control, 2nd Edition, Wiley, New York, 1991.