Study of sinterability of bronze and phosphorus bronze steels
Source abstract
Abstract
Abstract The sinterability of different alloyed steels was studied by dilatometry at different temperatures. Iron and two amounts of graphite powders (0.3 and 0.7%) were used as raw materials for the base steels. Three levels (2, 5 and 8%) of bronze and phosphorus bronze (promoting liquid phase) were employed as alloying additions. All the materials were compacted at 700 MPa. The sintering study by dilatometry was made in 95%N 2 –5%H 2 atmosphere. Five different temperatures were: austenizing temperature, initial temperature of swelling, temperature of liquid phase forming, temperature at which maximum rate of deformation takes place, and initial temperature of shrinkage. With these temperatures, the optimum point of sinterability was determinated in each steel. Finally, all the materials were sintered at six different temperatures (910, 950, 990, 1030, 1070 and 1110°C) in the same atmosphere to obtain the sinterability plots (sintering density vs. temperature).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Powder Metal Technologies and Applications, ASM Handbook, Vol. 7, No. 123, The Materials Information Society, 1998, pp. 704–706.
2. R.M. German, Powder Metallurgy of Iron and Steel, Wiley, New York, 1998, pp. 9–13, 198, 203 (Chapter 1).
3. A. Romero, Mechanical properties of sintered materials, in: Torralba, Velasco (Eds.), Powder Metallurgy Work Congress Education Programme, Granada, Spain, October 18–22, 1998, pp. 8–19.
4. H. Danninger, B. Üregen, Embrittlement of PM steels through interaction of molybdenum and phosphorus, Euro PM, 1997, pp. 319–326.
5. J. Bolton, M. Othman, B.S. Becker, Enhanced sintering of experimental Fe–Mo–Cr–C alloy steel powders through phosphorus alloying addition, in: Proceedings of the Powder Metallurgy World Congress, 1998, pp. 225–230.
6. S. Strobl, H. Danninger, HSS-Cu two-phase tool steels prepared from Cu coated steel powders, in: Proceedings of the Powder Metallurgy World Congress, 1998, pp. 459–464.
7. H. Frydrych, J. Frydrych, S. Gacek, A. Radori, Structure and properties of sintered, iron–bronze structural materials, in: Proceedings of the World Congress PM Steels, Vol. 2, Granada, Spain, October 18–22, 1998, pp. 239–244.
8. S. Yoshitomo, F. Masashi, M. Toshiyuki, O. Takeo, I. Hiroyuki, Effect of the various factors on the dimensional changes on sintering of Fe–Cu–C powder compacts, in: Proceedings of the World Congress PM Steels, Vol. 2, Granada, Spain, October 18–22, 1998, pp. 191–196.
9. Dimensional behaviour of copper–carbon sintered steels
10. Effect of carbon on dimensional and microstructural characteristics of Fe–Cu compacts during sintering10.1179/pom.1990.33.2.147 ↗
11. Experimental statistics applied to PM processes
12. Microstructure and properties of PM Cu–P steels