journal article·2017-06

Characterization of HoCo 3 nanoflakes synthesized via high energy ball – milling

Anna Bajorek, Krystian Prusik, Maciej Zubko, Marcin Wojtyniak, Grażyna Chełkowska

Publisher page

Abstract

Abstract The microstructure and magnetic properties of bulk crystalline and ball – milled binary HoCo3 intermetallic compounds were studied. The presence of PuNi3 type of crystal phase was confirmed in all investigated specimens. The emergence of a partly amorphous phase was demonstrated at the end of grinding process. The influence of the applied high energy ball – milling parameters on the microstructure was investigated. The influence of the increased milling time on the final size of particles and crystallites was characterized by a variety of complementary measurement methods. The fabrication of nanoflakes and agglomerates for long pulverization times was demonstrated. Furthermore, the non-linear dependence of the saturation magnetization, coercivity and remanence driven by high energy ball – milling was evidenced. The enhancement of the coercivity for a low milling time was shown. A quantitative analysis of the XPS spectra over ion etching indicates the formation of Co oxides on the nanoflakes surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic properties of thin films · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. Advanced in nanostructured permanent magnets10.1088/0022-3727/46/4/043001 ↗
3. High – energy ball-milling of alloys and compounds10.1023/A:1021245701811 ↗
4. Synthesis of nanostructured materials by mechanical milling: problems and opportunities10.1016/S0965-9773(97)00014-7 ↗
5. Review: mechanical milling/alloying of intermetallics10.1016/0966-9795(96)00001-5 ↗
6. Surfactant-assisted ball milling: a novel route to novel materials with controlled nanostructure – a review
7. Effect of milling parameters on SmCo5 nanoflakes prepared by surfactant-assisted high energy ball milling10.1063/1.4773323 ↗
8. Rare earth–cobalt hard magnetic nanoparticles and nanoflakes by high-energy milling10.1088/0953-8984/22/16/164213 ↗
9. Formation of SmCo5 single-crystal submicron flakes and textured polycrystalline nanoflakes10.1016/j.actamat.2010.09.060 ↗
10. A novel route for the synthesis of CaF2-coated SmCo5 flakes10.1016/j.jallcom.2012.08.057 ↗
11. Effect of ball-milling surfactants on the interface chemistry in hot-compacted SmCo5 magnets10.1016/j.actamat.2012.08.038 ↗
12. Effect of different surfactants on the formation and morphology of SmCo5 nanoflakes10.1016/j.actamat.2011.07.035 ↗
13. Influence of the type of surfactants and hot compaction on the magnetic properties of SmCo5 nanoflakes10.1063/1.3561443 ↗
14. Structure and magnetism of SmCo5 nanoflakes prepared by surfactant-assisted ball milling with different ball sizes10.1016/j.jmmm.2013.06.047 ↗
15. Effect of milling time on the morphology and magnetic properties of SmCo5 nanoflakes fabricated by surfactant-assisted high-energy ball milling10.1016/j.jmmm.2014.09.079 ↗
16. Study on morphology and magnetic behavior of SmCo5 and SmCo5/Fe nanoparticles synthesized by surfactant-assisted ball milling10.1016/j.jallcom.2009.01.129 ↗
17. Field-ball milling induced anisotropy in magnetic particles10.1088/0022-3727/37/24/L01 ↗
18. Sm – Co hard magnetic nanoparticles prepared by surfactant-assisted ball milling10.1088/0957-4484/18/46/465701 ↗
19. Sm2Co17 nanoparticles synthesized by surfactant-assisted high energy ball milling10.1016/j.jallcom.2012.06.011 ↗
20. Anisotropic Sm2Co17 nano-flakes produced by surfactant and magnetic assisted high energy ball milling10.1016/S1002-0721(12)60287-7 ↗
21. Investigation on microstructure and magnetic properties of Sm2Co17 magnets aged at high temperature10.1063/1.3563084 ↗
22. Anisotropic Sm-(Co,Fe) nanoparticles by surfactants-assisted ball milling10.1063/1.3067851 ↗
23. Textured resin-bonded Sm(Co,Fe,Cu)5 nanostructured magnets exploiting magnetic field and surfactant-assisted milling10.1016/j.jallcom.2008.09.211 ↗
24. Crystal structure and magnetic properties of SmCo6.6Nb0.4 nanoflakes prepared by surfactants-assisted ball milling10.1016/S1002-0721(13)60015-0 ↗
25. Crystal structure and magnetic properties of ultrafine nanocrystalline SmCo3 compound10.1088/0957-4484/21/11/115708 ↗
26. Magnetic properties of amorphous Y–Co powders prepared by mechanical milling
27. Effect of milling-induced amorphization on the magnetic properties of Gd – Co powders
28. Magnetic and structural properties of nanocrystalline PrCo310.1088/1742-6596/303/1/012028 ↗
29. Magnetic and structural properties of nanocrystalline PrCo310.1088/1757-899X/28/1/012048 ↗
30. Study of the magnetic and electronic properties of nanocrystalline PrCo3 by neutron powder diffraction and density functional theory10.1088/0953-8984/25/11/116001 ↗
31. Preparation of YCo5, PrCo5 and SmCo5 anisotropic high-coercivity powders via mechanochemistry10.1016/j.jmmm.2014.05.014 ↗
32. Structural and magnetic properties of nanostructured Pr0.75Y0.25Co5 powders obtained by mechanical milling and subsequent annealing10.1007/s10948-014-2525-0 ↗
33. Novel NdCo5 nanoflakes and nanoparticles produced by surfactants-assisted high-energy ball milling10.1007/s11051-012-0719-6 ↗
34. Magnetic hardening of high-energy ball-milled nanocrystalline LaMn2Si210.1016/j.jmmm.2007.06.023 ↗
35. Single-crystal and textured polycrystalline Nd2Fe14B flakes with a submicron or nanosize thickness10.1016/j.actamat.2011.11.062 ↗
36. Evolution of Nd2Fe14B nanoparticles magnetism during surfactant-assisted ball milling10.1016/j.intermet.2010.12.012 ↗
37. Microstructural and magnetic characterization of Nd2Fe17 ball milled alloys10.1016/j.jnoncrysol.2008.08.020 ↗
38. Synthesis of Sm–Co and Sm–Co/Fe nanocrystals by reductive annealing of nanoparticles10.1016/j.jallcom.2010.10.164 ↗
39. Magnetically enhanced hard-soft SmCo5-FeNi composites obtained via high ball milling and heat treatment10.1016/j.jmmm.2013.06.006 ↗
40. A structural investigation of SmCo5/Fe nanostructured alloys obtained by high-energy ball milling and subsequent annealing10.1088/0022-3727/43/8/085001 ↗
41. Morphology and magnetic properties of CeCo5 submicron flakes prepared by surfactant-assisted high-energy ball milling10.1016/j.jmmm.2012.05.026 ↗
42. The effect of high energy ball milling on the crystal structure of GdNi510.1016/S0921-4526(01)00506-3 ↗
43. Influence of the mechanical grinding on the magnetic properties of GdMn210.1016/S0925-8388(01)00928-8 ↗
44. Magnetic properties of ball-milled TbFe2 and TbFe2B10.1007/BF02708500 ↗
45. Tb0.3Dy0.7Fe1.92 nanoflakes prepared by surfactant-assisted high energy ball milling10.1016/j.jallcom.2011.02.092 ↗
46. Magnetic properties of Tb(Ni0.95Fe0.05)3 crystalline compound and powder10.4028/www.scientific.net/SSP.203-204.292 ↗
47. Magnetic properties of Tb(Ni1-xFex )3:(x = 0.2, 0.6) crystalline compound and powders10.12693/APhysPolA.126.180 ↗
48. Magnetic properties and magnetocaloric effect of the Gd(Ni1-xFex)3 crystalline compound and powder10.1002/pssa.200824470 ↗
49. Study of morphology and magnetic properties of the HoNi3 crystalline and ball-milled compound10.1016/j.matchar.2015.01.011 ↗
50. Synthesis of nanostructured Ho(Ni0.5 Fe0.5)3 compound via ball – milling10.1016/j.matchar.2015.10.026 ↗
51. Application of HEBM for obtaining Ho(Ni0.5Co0.5)3 nanoflakes10.1016/j.matchemphys.2016.04.031 ↗
52. Effect of milling time on the morphology and magnetism of Ho(Fe0.5Co0.5)3 nanoflakes prepared by HEBM10.1016/j.intermet.2016.06.013 ↗
53. HoFe3 magnetic nanopowders fabricated by high energy ball milling10.1016/j.matchar.2016.12.019 ↗
54. The nanoflower – like morphology and magnetism of as – milled Ho(Ni0.8Co0.2)3 powder prepared by HEBM10.4028/www.scientific.net/SSP.257.76 ↗
55. Intermetallic compounds of rare-earth and 3d transition metals10.1088/0034-4885/40/10/002 ↗
56. Structure magnetique des composes intermetalliques terre rare-nickel de formule TNi310.1016/0038-1098(72)90880-0 ↗
57. Interprétation des structures magnétiques des composés TNi3 à l’aide du champ cristallin10.1002/pssb.2220470130 ↗
58. Proprietes cristallographiques at magnetiques des allages de formule TNi3, dans laquelle T designe un metal de terre rare ou l‘yttrium
59. A study of the transition – metal moment in the systems Gd(Co1-xNix)3 and Gd(Fe1-xNix)3
60. Mössbauer and X-ray studies of Dy(Fe1−xNix)3 and Y(Fe1−xNix)3 intermetallic compounds10.1002/pssa.2210330108 ↗
61. The analysis of the magnetic properties in the intermetallic YxGd1-xNi3 compounds10.1016/j.jmmm.2012.07.036 ↗
62. Influence of Fe substitution on the structure and magnetic properties in Gd(Ni1−xFex)3 intermetallic compounds10.1016/j.jallcom.2009.05.134 ↗
63. The analysis of the magnetic properties and the electronic structure in the TbxGd1-xFe3 intermetallics10.1016/j.intermet.2013.07.020 ↗
64. The influence of Gd/Ce substitution on the magnetic properties, electronic structure and the valence of cerium in the CexGd1-xNi3 system10.1016/j.intermet.2013.12.002 ↗
65. On the magnetic behaviour of (GdxY1-x)Fe3 compounds10.1088/0305-4608/11/10/005 ↗
66. Magnetic properties of Gd(FeyAl1-y)3 and (GdxY1-x)Fe3 compounds10.1088/0305-4608/12/11/025 ↗
67. Magnetic properties of RT’3-xNix compounds ( R = Dy or Ho and T’ = Fe or Co), R. A. Butera, R. S. Craig10.1063/1.1662276 ↗
68. Magnetic properties of DyFe3-xCox and HoFe3-xCox10.1016/S0022-3697(73)80015-0 ↗
69. Magnetic instability of the Co sublattice in the Ho1-xYxCo3 system10.1016/S0921-4526(02)01102-X ↗
70. Temperature induced itinerant electron metamagnetism in ErCo3 and HoCo3: influence of an external field ad pressure10.1016/S0038-1098(01)00375-1 ↗
71. Temperature – induced itinerant metamagnetism in R1-xYxCo3 system (R = Ho, Tb)10.1016/S0304-8853(02)01156-3 ↗
72. Temperature – induced itinerant electron metamagnetism10.1016/j.jmmm.2005.10.248 ↗
73. Magnetic properties of the Gd1-xTbxNi3 intermetallic compounds10.4028/www.scientific.net/SSP.170.109 ↗
74. Magneto-history effect in the TbxGd1-xNi3 compounds10.12693/APhysPolA.121.1136 ↗
75. Magnetization of RFe3 intermetallic compounds: Molecular field theory analysis10.1063/1.331207 ↗
76. Powder cell – a program for the representation and manipulation of crystal structures and calculations of the resulting X-ray powder patterns10.1107/S0021889895014920 ↗
77. Metrological characterization of X-ray diffraction methods for determination of crystallite size in nano-scale materials10.1016/j.matchar.2013.09.002 ↗
78. Structural and thermodynamic properties of heavily mechanically deformed Ru and AlRu10.1063/1.342541 ↗
79. Nanocrystalline metals prepared by low energy ball milling10.1063/1.361294 ↗
80. Gwyddion: an open-source software for SPM data analysis
81. Bandyopadhyay · 2002
82. Spin and orbital magnetic moments of size-selected iron, cobalt, and nickel clusters10.1103/PhysRevB.90.184420 ↗
83. Size effects in the magnetic anisotropy of embedded cobalt nanoparticles: from shape to surface10.1038/srep14749 ↗
84. Exchange bias phenomenology and model of core/shell nanoparticles10.1166/jnn.2008.015 ↗
85. Influence of interfacial roughness on exchange bias in core – shell nanoparticles10.1103/PhysRevB.84.092404 ↗
86. Shape – dependent exchange bias effect in magnetic nanoparticles with core – shell morphology10.1103/PhysRevB.92.064420 ↗
87. Exchange bias for core/shell magnetic nanoparticles10.1016/j.physa.2015.03.073 ↗
88. Sign reversal of magnetization and exchange bias field in LaCr0.85Mn0.15O310.1063/1.4826903 ↗
89. Beating the superparamagnetic limit with exchange bias10.1038/nature01687 ↗
90. Magnetic phase diagram of superantiferromagnetic TbCu2 nanoparticles10.1088/0953-8984/27/49/496002 ↗
91. Exchange bias effect in alloys and compounds10.1088/0953-8984/23/7/073201 ↗
92. Exchange bias in nanostructures10.1016/j.physrep.2005.08.004 ↗
93. Magnetic compensation phenomenon and the sign reversal in the exchange bias field in a single crystal of Nd0.75Ho0.25Al210.1209/0295-5075/86/47003 ↗
94. Magnetic response in the vicinity of magnetic compensation: a case study in spin ferromagnetic Sm1−xGdxAl2 intermetallic alloys10.1088/0953-8984/22/49/496002 ↗
95. Self-magnetic compensation and shifted hysteresis loops in ferromagnetic samarium systems10.1103/PhysRevB.82.144411 ↗
96. Exchange bias in bulk Ni–Mn–In-based Heusler alloys10.1016/j.jmmm.2008.03.008 ↗
97. Exchange bias behavior and inverse magnetocaloric effect in Ni50Mn35In15 Heusler alloy10.1016/j.jallcom.2008.07.012 ↗
98. Anomalies at the compensation temperature in the zero-magnetization ferromagnet (Sm,Gd)Al210.1103/PhysRevB.72.054436 ↗
99. Magnetic and transport properties of selected YbxGd1-xNi5 intermetallics10.1016/j.intermet.2012.08.018 ↗
100. Remanence and coercivity in isotropic nanocrystalline permanent magnets10.1103/PhysRevB.49.6100 ↗