The study of thermal interaction and microstructure of sodium silicate/bentonite composite under microwave radiation
Source abstract
Abstract
Abstract The commercial heating oven usually consumes the power around 2500–3000 Watt and the temperature inside the oven is still below 350 °C. If we need to increase a temperature above 500 °C, a special heating setup with a higher power furnace is required. However, in this work, we propose a composite material that interacts with 2.45 GHz 500 Watt microwave and rapidly redeems the thermal energy with the temperature around 600–900 °C. The composite amorphous material easily forms liquid ceramics phase with a high temperature output and responds to the microwave radiation better than that of the solid phase. During the heating process, phase transformation occurs. This method is very effective and can be used to drastically reduce the power consumption of any heating process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Review on microwave-matter interaction fundamentals and efficient microwave-associated heating strategies10.3390/ma9040231 ↗
2. The High-power pulsed magnetron: development and design for radar applications10.1049/ji-3a-1.1946.0188 ↗
3. Absorbed energy distribution from radiofrequency electromagnetic radiation in a mammalian cell model: effect of membrane-bound water10.1002/bem.2250160304 ↗
4. Volatile flavor components of beef boiled conventionally and by microwave radiation10.1021/jf60206a032 ↗
5. Investigation of dielectric properties of different cake formulations during microwave and infrared–microwave combination baking10.1111/j.1750-3841.2007.00325.x ↗
6. Microwave versus conventional sintering: a review of fundamentals, advantages and applications10.1016/j.jallcom.2010.01.068 ↗
7. Microwave energy applied to processing of high-temperature materials
8. Thermal stability of ceramic materials in microwave heating10.1111/j.1151-2916.1995.tb08434.x ↗
9. A Study of millimeter-wave sintering of fine-grained alumina compacts10.1109/27.887755 ↗
10. Microwave sintering of solid oxide fuel cell materials: I, Zirconia-8 mol% Yttria10.1111/j.1151-2916.1992.tb08184.x ↗
11. Development of high performance Mg–Al2O3 composites containing Al2O3 in submicron length scale using microwave assisted rapid sintering10.1179/174328405X51758 ↗
12. Plasma sintering of Co–WC cubic boron nitride composites10.1016/j.matlet.2009.01.086 ↗
13. Spark plasma sintering of transparent alumina10.1016/j.scriptamat.2007.06.009 ↗
14. The influence of spark plasma sintering temperature on the microstructure and thermoelectric properties of Al,Ga dual-doped ZnO10.1007/s11664-012-2325-x ↗
15. Silicon carbide whiskers: preparation and high dielectric permittivity10.1111/jace.12393 ↗
16. Complex permittivity of graphite, carbon black and coal powders in the ranges of x-band frequencies (8.2 to 12.4 GHz) and between 1 and 10 GHz10.2355/isijinternational.51.1766 ↗
17. Microwave permittivity and dielectric relaxation of a high surface area activated carbon10.1007/s00339-003-2329-8 ↗
18. Microwave heating characteristics of graphite based powder mixtures10.1016/j.icheatmasstransfer.2013.09.008 ↗
19. Microwave heating of carbon-based solid materials10.5714/CL.2014.15.1.015 ↗
20. Protein-concentration-dependent adsorption behaviour of inorganic layered materials10.1039/C4RA13334J ↗
21. Thermal shock effect on the glass thermal stress response and crack propagation10.1016/j.proeng.2013.08.118 ↗
22. Self-driven cracking by crack-face cooling during thermal shock testing of ceramics10.1111/j.1551-2916.2010.04286.x ↗
23. Rao · 1973
24. Frequency dependence of the complex permittivity and its impact on dielectric sensor calibration in soils10.2136/sssaj2005.0067a ↗
25. Dielectric properties of bentonite pastes as a function of temperature10.1111/j.1745-4549.1993.tb00230.x ↗
26. Phase evolution on heat treatment of sodium silicate water glass10.1016/j.jnoncrysol.2007.08.037 ↗
27. Characterization of natural- and organo-bentonite by XRD, SEM, FT-IR and thermal analysis techniques and its adsorption behaviour in aqueous solutions10.1180/claymin.2012.047.1.31 ↗
28. Ultrathin hybrid films of clay minerals10.1039/B610698F ↗
29. Novolac cured epoxy resin/fullerene modified clay composites: applied to copper clad laminates10.1039/C5RA18073B ↗
30. Correlation between dielectric constant and chemical structure of sodium silicate glasses10.1063/1.363824 ↗
31. Dielectric losses of some simple ternary silicate glasses10.1111/j.1151-2916.1959.tb14076.x ↗
32. The interaction between bentonite and water vapor. I: examination of physical and chemical properties10.1346/CCMN.2014.0620303 ↗