Thermophysical properties of a novel copper reinforced oil palm shell (OPS) composite: Effect of copper volume fraction and temperature
Source abstract
Abstract
Abstract Thermophysical properties of novel oil palm shell (OPS)-copper composite with different copper volume fractions at varying temperatures, ranging from 30 °C to 100 °C have been reported in this work. Thermophysical properties of composites have been determined by using ‘KD2 Pro’ instrument based on transient hot wire method. Thermo-gravimetric analysis of composites show that the thermal stability increases by more than 100 °C on increasing the copper volume fraction from 0.0 to 0.2 in the composite. Addition of copper in OPS has increased thermal conductivity and thermal diffusivity while reduced the specific heat capacity of the composite significantly. At room temperature, thermal conductivity, thermal diffusivity and specific heat capacity of the composite with copper volume fraction 0.2 is found to be 0.408 W/m-K, 0.221 mm2/s and 1.309 kJ/kg-K respectively as compared to 0.202 W/m-K, 0.142 mm2/s and 1.152 kJ/kg-K respectively for pure OPS (with no copper). Increase in the temperature resulted in the reduction in thermal conductivity & thermal diffusivity while specific heat capacity is found to increase with the rise in temperature for all the composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Aluminum Alloys Composites Properties · Brake Systems and Friction Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Properties of graphene/waterborne polyurethane nanocomposites cast from colloidal dispersion mixtures10.1080/00222348.2011.583193 ↗
2. Graphite oxides as effective fire retardants of epoxy resin10.1007/s13233-011-0106-7 ↗
3. Mechanical and thermal properties of composites of cis and trans-polyisoprene blends filled with Al-powder10.1016/j.powtec.2012.07.042 ↗
4. Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution10.1016/j.msea.2007.07.026 ↗
5. Thermal conductivity of particle filled polyethylene composite materials10.1016/S0266-3538(02)00194-X ↗
6. Thermal conductivity of polypropylene composites filled with silane-modified hexagonal BN10.1016/j.compscitech.2015.03.003 ↗
7. A computational and experimental investigation on thermal conductivity of particle reinforced epoxy composites10.1016/j.commatsci.2010.02.025 ↗
8. Modelling of effective thermal conductivity: a comparison of artificial neural networks and theoretical models
9. An investigation into modelling thermal conductivity for alumina–water nanofluids10.1016/j.powtec.2012.08.003 ↗
10. Thermal conductivity, viscosity and surface tension of nanofluids based on FeC nanoparticles10.1016/j.powtec.2015.06.040 ↗
11. Effect of lumen size on the effective transverse thermal conductivity of unidirectional natural fiber composites10.1016/j.compscitech.2012.01.009 ↗
12. Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles10.1016/j.matdes.2013.01.025 ↗
13. Effect of fiber treatments on tensile and thermal properties of starch/ethylene vinyl alcohol copolymers/coir biocomposites10.1016/j.biortech.2009.03.085 ↗
14. Thermal conductivity of sorghum and sorghum–thermoplastic composite panels10.1016/j.indcrop.2013.01.011 ↗
15. Thermal diffusivity, thermal conductivity, and specific heat of flax fiber–HDPE biocomposites at processing temperatures10.1016/j.compscitech.2008.02.016 ↗
16. Bulk thermal properties of alfalfa pellets
17. A comparison of the thermal conductivity of oil palm shell foamed concrete with conventional materials10.1016/j.matdes.2013.04.078 ↗
18. Thermal properties of silicon powder filled high-density polyethylene composites10.1016/j.tca.2010.02.002 ↗
19. Thermal properties and heat storage analysis of palmitic acid-TiO 2 composite as nano-enhanced organic phase change material (NEOPCM)10.1016/j.applthermaleng.2016.01.130 ↗
20. Melt processing and characterisation of polyamide 6/graphene nanoplatelet composites10.1039/C5RA08509H ↗
21. Suitability of recycled polyethylene/palm kernel shell-iron filings composite for automobile application
22. M. Tripathi, J.N. Sahu, P. Ganesan, J. Jewaratnam, Thermophysical characterization of Oil Palm Shell (OPS) and OPS char synthesized by the microwave pyrolysis of OPS, Appl. Therm. Eng., doi: http://dx.doi.org/10.1016/j.applthermaleng.2016.03.053.10.1016/j.applthermaleng.2016.03.053 ↗
23. Graphene modified lipophilically by stearic acid and its composite with low density polyethylene10.1080/00222348.2013.879804 ↗
24. Synthesis and characterization of core-shell SiO2 nanoparticles/poly(3-aminophenylboronic acid) composites10.1002/app.25938 ↗
25. Organosilane modified magnetite nanoparticles/poly(aniline-co-o/m-aminobenzenesulfonic acid) composites: synthesis and characterization10.1016/j.reactfunctpolym.2007.05.023 ↗
26. Hierarchical assembly of graphene/polyaniline nanostructures to synthesize free-standing supercapacitor electrode10.1016/j.compscitech.2014.04.007 ↗
27. Nanofibrous TiO2-core/conjugated polymer-sheath composites: synthesis, structural properties and photocatalytic activity10.1166/jnn.2010.3143 ↗
28. Adsorption of phenol by oil–palm-shell activated carbons in a fixed bed10.1016/j.cej.2009.01.034 ↗
29. Microwave-assisted production of activated carbons from oil palm shell in the presence of CO2 or N2 for CO2 adsorption10.1016/j.jiec.2014.09.029 ↗
30. Hexavalent chromium adsorption on impregnated palm shell activated carbon with polyethyleneimine10.1016/j.biortech.2010.01.135 ↗
31. Stabilization of clayey soil using ultrafine palm oil fuel ash (POFA) and cement10.1016/j.trgeo.2015.01.002 ↗
32. Effect of microwave frequency on dielectric properties of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS10.1016/j.jaap.2015.01.007 ↗
33. Chemical, dielectric and structural characterization of optimized hydrochar produced from hydrothermal carbonization of palm shell10.1016/j.fuel.2015.08.057 ↗
34. Effect of process parameters on production of biochar from biomass waste through pyrolysis: a review10.1016/j.rser.2015.10.122 ↗
35. Fabrication and characterization of aluminum nitride polymer matrix composites with high thermal conductivity and low dielectric constant for electronic packaging10.1016/j.mseb.2012.03.056 ↗
36. Copper-carbon and aluminum-carbon composites fabricated by powder metallurgy processes10.1088/1742-6596/525/1/012015 ↗
37. Architectural optimization for microelectronic packaging10.1016/j.applthermaleng.2008.12.037 ↗
38. Specific heat and thermal conductivity of softwood bark and softwood char particles10.1016/S0016-2361(02)00398-8 ↗
39. Heat transfer, mass transfer and kinetics study of the vacuum pyrolysis of a large used tire particle10.1016/0009-2509(95)00062-A ↗
40. Morphology and crystallization behavior of HDPE/CNT nanocomposite10.1080/00222340500522299 ↗
41. A study of the mechanical properties of short natural-fiber reinforced composites10.1016/j.compositesb.2005.04.001 ↗
42. Specific heat of peanuts by differential scanning calorimetry10.13031/2013.37559 ↗
43. Changes in physical properties of corn during drying10.13031/2013.34705 ↗
44. Self-assembly directed synthesis of poly (ortho-toluidine)-Metal (gold and palladium) composite nanospheres10.1166/jnn.2007.692 ↗
45. Synthesis and properties of magnetite/poly (aniline-co-8-amino-2-naphthalenesulfonic acid) (SPAN) nanocomposites10.1002/pat.735 ↗
46. Effect of temperature on dielectric properties and penetration depth of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS10.1016/j.fuel.2015.02.118 ↗
47. Hydrophilic Cu2O nanostructured thin films prepared by facile spin coating method: investigation of surface energy and roughness10.1016/j.matchemphys.2014.07.008 ↗
48. A new one-step synthesis method for coating multi-walled carbon nanotubes with cuprous oxide nanoparticles10.1016/j.scriptamat.2008.01.047 ↗
49. Self-assembly approach for the synthesis of electro-magnetic functionalized Fe3O4/polyaniline nanocomposites: effect of dopant on the properties10.1016/j.colsurfa.2007.12.057 ↗
50. Conducting polymer functionalized multi-walled carbon nanotubes with noble metal nanoparticles: synthesis, morphological characteristics and electrical properties10.1016/j.synthmet.2008.11.030 ↗
51. High-yield aqueous phase exfoliation of graphene for facile nanocomposite synthesis via emulsion polymerization10.1016/j.jcis.2013.08.006 ↗
52. Physico-chemical characteristics and mineral transformation behavior of ashes from crop straw10.1021/ef900496b ↗
53. Potential of hydrogen from oil palm biomass as a source of renewable energy worldwide10.1016/j.enpol.2007.06.017 ↗
54. Microwave pyrolysis of oil palm fiber (OPF) for hydrogen production: parametric investigation10.1016/j.enconman.2016.02.058 ↗
55. Estimation on thermal conductivities of filled polymers10.1002/app.1986.070320702 ↗
56. Sound and heat revolutions in phononics10.1038/nature12608 ↗
57. Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres10.1016/S0266-3538(00)00162-7 ↗
58. Thermal properties of soybean pod as a function of moisture content and temperature
59. Effects of moisture change on the physical and thermal properties of sericea lespedeza pellets
60. Thermal properties of sweet potato with its moisture content and temperature10.1080/10942910601137482 ↗
61. Physical and thermal properties of coffee10.1006/jaer.1999.0411 ↗
62. Thermal conductivity and diffusivity of wood10.1007/s002260050130 ↗
63. Thermal properties of some oily seeds
64. Thermal conductivity and thermal diffusivity of timothy hay