journal article·2015-03

Solid-state reactions between Sn-20.0 wt.%In-x wt.%Zn solders and Ag and Ni substrates

Shih-kang Lin, Ru-Bo Chang, Sinn-wen Chen, Ming-yueh Tsai, Chia-ming Hsu

Publisher page

Abstract

Abstract The Sn-20 wt.%In (Sn–20In) alloy is a promising base material for low-temperature Pb-free solders. Zn is usually added in solders to reduce the extent of undercooling during reflow, while Ag and Ni are commonly seen under bump metallurgy in contact with solder in electronic products. In this study, solid-state reactions at 150 °C between Zn-doped Sn–20In solders and Ag and Ni substrates are investigated. In Sn–20In–xZn/Ag couples, when the Zn-doping level is low (x ≤ 1.0), the reaction path is γ-InSn4/ζ-AgZn/ζ-(Ag,In)/ζ-AgZn/Ag, that the ζ-AgZn layer near the solder has non-uniform composition, the ζ-(Ag,In) layer has a porous microstructure, and the ζ-AgZn phase near the substrate is composed of small grains. When the Zn doping level is high (x ≥ 2.0), the reaction path becomes γ-InSn4/e-AgZn3/γ-Ag5Zn8/ζ-AgZn/Ag, that all intermetallic compounds (IMCs) are planar and neither Sn nor In participate in the reactions. Although the reactions are very sensitive to Zn contents, the overall thicknesses of IMCs do not vary much with different Zn-doping levels. In Sn–20In–xZn/Ni couples, the planar Ni5Zn21 phase is the only reaction product with a very slow growth rate. The interfacial liquation in Sn–20In/Ni contacts can be fully mitigated with a minor Zn addition of 0.5 wt.%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
2. Phase diagrams of Pb-free solders and their related materials systems10.1007/s10854-006-9010-x ↗
3. Phase transformation and microstructural evolution in solder joints10.1007/s11837-007-0008-5 ↗
4. Reliability issues for flip-chip packages10.1016/j.microrel.2004.01.007 ↗
5. 3D chip-stacking technology with through-silicon vias and low-volume lead-free interconnections10.1147/JRD.2008.5388567 ↗
6. Interfacial reaction issues for lead-free electronic solders10.1007/s10854-006-9031-5 ↗
7. Interfacial reactions between lead-free solders and common base materials10.1016/j.mser.2005.03.001 ↗
8. Effective suppression of interfacial intermetallic compound growth between Sn-58wt.%Bi solders and Cu substrates by minor Ga addition10.1016/j.jallcom.2013.10.035 ↗
9. Metallurgy of low-temperature Pb-free solders for electronic assembly10.1179/imr.1995.40.2.65 ↗
10. Compression stress-strain and creep properties of the 52In–48Sn and 97In–3Ag low-temperature Pb-free solders10.1007/s10854-006-9013-7 ↗
11. Interfacial reaction between liquid Sn–20In–2.8Ag solder and Ag substrate10.3139/146.021194 ↗
12. Selective formation of intermetallic compounds in Sn–20In–0.8Cu ball grid array solder joints with Au/Ni surface finishes10.1007/s11664-004-0020-2 ↗
13. Effects of temperature on interfacial reactions in gamma-InSn4/Ni couples10.1557/jmr.2006.0137 ↗
14. Electric current-induced abnormal Cu/gamma-InSn4 interfacial reactions10.1557/jmr.2006.0378 ↗
15. Interfacial reactions in the Sn-20 at % In/Cu and Sn-20 at % In/Ni couples at 160 degrees C10.1557/jmr.2006.0200 ↗
16. Liquidus projection and solidification of the Sn–In–Cu ternary alloys10.1007/s11664-008-0380-0 ↗
17. 250 degrees C isothermal section of ternary Sn–In–Cu phase equilibria10.1557/jmr.2009.0317 ↗
18. Interfacial reactions in Sn–20In–2.8Ag/Cu couples10.1016/j.matchemphys.2013.07.014 ↗
19. Sn–In–Ag phase equilibria and Sn–In–(Ag)/Ag interfacial reactions10.1016/j.matchemphys.2011.02.078 ↗
20. Interfacial reactions in the Sn–In–Zn/Ag and Sn–In–Zn/Ni couples10.1016/j.matchemphys.2011.11.057 ↗
21. Kinetics of intermetallic compound layer growth and interfacial reactions between Sn–8Zn–5In solder and bare copper substrate10.1179/174328405X27061 ↗
22. Intermetallic reactions in Sn–8Zn–20In solder ball grid array packages with Au/Ni/Cu and Ag/Cu pads10.1007/s11664-006-0197-7 ↗
23. Mechanisms for the intermetallic formation during the Sn–20In–2.8Ag/Ni soldering reactions10.1007/s11664-004-0146-2 ↗
24. The interactions between In–Sn solders and an electroless Ni–P deposit upon heat treatment10.1007/BF00180776 ↗
25. Wetting interactions between the Ni–Cu–P deposit and In–Sn solders10.1109/96.618218 ↗
26. Comparison of Sn2.8Ag20In and Sn10Bi10In solders for intermediate-step soldering10.1007/s11664-006-0302-y ↗
27. AgIn2/Ag2In transformations in an In–49Sn/Ag soldered joint under thermal aging10.1007/BF02657715 ↗
28. Soldering reactions between In49Sn and Ag thick films10.1007/s11664-002-0202-8 ↗
29. Observations of nucleation catalysis effects during solidification of SnAgCuX solder joints10.1007/s11837-007-0087-3 ↗
30. Formation of alternating interfacial layers in Au–12Ge/Ni joints10.1038/srep04557 ↗
31. Massalski · 1990 · 117
32. Thermodynamic calculation of the In–Sn–Zn ternary system10.1016/S0925-8388(00)01484-5 ↗
33. Miodownik · 1990 · 1508
34. Interfacial reactions between Sn–Zn alloys and Ni substrates10.1007/s11664-009-0950-9 ↗
35. Kinetic analysis of Ni5Zn21 growth at the interface between Sn–Zn solders and Ni10.1016/j.intermet.2011.11.008 ↗