journal article·2007-08

Fabrication and characterization of YSZ/Ni-YSZ bi-layered composites using thermoplastic coextrusion

Jong-Jae Sun, Won-Young Choi, Hyoun-Ee Kim, Young-Hag Koh

Materials Chemistry and Physics· Volume 104· Issue 2-3
Publisher page

Abstract

Abstract The thermoplastic coextrusion process was used to fabricate YSZ/Ni-YSZ bi-layered composites. In this method, an initial feedrod was prepared by assembling YSZ and NiO-YSZ thermoplastic compounds to produce a monolithic body with a cross-section of 24 mm × 24 mm and then coextruded through various orifices having dimensions of 24 × 2, 1 and 0.6 mm at 120 °C. This simple process produced thin plates with a remarkable reduction in thickness, while preserving the YSZ:NiO-YSZ thickness ratio of 1:39. After binder removal, the samples were co-fired at 1350 °C for 3 h in air, followed by reduction at temperatures ranging from 700 to 900 °C for 5 h in an Ar-5% H 2 atmosphere. Using this method, it was possible to fabricate a YSZ/Ni-YSZ bi-layered composite without any noticeable defects, in which a 11-μm thick dense YSZ layer was coated onto a 400-μm thick Ni-YSZ cermet. Furthermore, the fabricated samples showed reasonable electrical conductivities, thus rendering them suitable for use as the basic components of planar solid oxide fuel cells (SOFCs).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Minh · J. Am. Ceram. Soc. · 1993 · 76 · 56310.1111/j.1151-2916.1993.tb03645.x ↗
2. Ormerod · Chem. Soc. Rev. · 2003 · 32 · 1710.1039/b105764m ↗
3. Chen · Solid State Ionics · 2006 · 177 · 35110.1016/j.ssi.2005.10.010 ↗
4. Cassidy · J. Power Sources · 1996 · 61 · 18910.1016/S0378-7753(96)02359-2 ↗
5. Dollen · J. Am. Ceram. Soc. · 2005 · 88 · 336110.1111/j.1551-2916.2005.00625.x ↗
6. Gaudon · J. Mater. Sci. · 2005 · 40 · 373510.1007/s10853-005-2000-1 ↗
7. Liu · J. Am. Ceram. Soc. · 2002 · 85 · 309610.1111/j.1151-2916.2002.tb00588.x ↗
8. Guan · J. Am. Ceram. Soc. · 2002 · 85 · 265110.1111/j.1151-2916.2002.tb00510.x ↗
9. Liang · Br. Ceram. Proc. · 1998 · 58 · 113
10. Liang · J. Eur. Ceram. Soc. · 2001 · 21 · 88310.1016/S0955-2219(00)00292-2 ↗
11. Chen · J. Am. Ceram. Soc. · 2004 · 87 · 98310.1111/j.1551-2916.2004.00983.x ↗
12. A.T. Crumm, J.W. Halloran, U.S. Patent No. 6,749,799, Jun 15, 2004.
13. Sun · J. Am. Ceram. Soc. · 2006 · 89 · 171310.1111/j.1551-2916.2006.00918.x ↗
14. Ho · J. Am. Ceram. Soc. · 1995 · 78 · 235310.1111/j.1151-2916.1995.tb08668.x ↗
15. Koh · J. Am. Ceramc. Soc. · 2005 · 88 · 269010.1111/j.1551-2916.2005.00498.x ↗
16. Lee · Solid State Ionics · 2004 · 166 · 1310.1016/j.ssi.2003.10.003 ↗