journal article·2020-02

Enhanced toughness and skin grafting durability of a dermatome made of Fe-based bulk metallic glass composites

Y.C. Liao, S.M. Song, T.H. Li, P.H. Tsai, C.Y. Chen, J.S.C. Jang, J.P. Chu, C.M. Tseng

Publisher page

Abstract

Abstract Based on the concept of dispersion toughening on the bulk metallic glass composites (BMGCs), a series of Fe-based BMGCs with compositions of (Fe41Cr15Co7Mo14C12B9Y2)100-x Tax (x = 2–5) were successfully fabricated by arc-melting and suction casting method. The excess of Ta was revealed to form one kind of fine Ta-rich precipitate and distributed homogeneously in the amorphous matrix. Accordingly, the alloy composition of Fe-based BMGC were further modified by adding 3.5 at% Ta to replace the content of boron and carbon, and fabricate into the Fe41Cr15Co7Mo14C10B7.5Y2Ta3.5 (Fe41C10B7.5Ta3.5) BMGC rod. As a result, the fracture toughness of this Fe41C10B7.5Ta3.5 BMGC was significantly improved to 10.2 MPa ⋅ m , which is about twice values of the Fe-base BMG without Ta content. The Fe41C10B7.5Ta3.5 BMGC dermatome exhibits much higher sharpness than the commercial one on the simulated skin grafting test because of its lower surface roughness and higher hardness. Moreover, the Fe41C10B7.5Ta3.5 BMGC dermatome presents much better durability on simulated skin grafting test, it can remain sharper edge-tip with a low blade sharpness index (BSI) value of 0.35 (in comparison with the BSI value of 0.59 for commercial blades) after the skin grafting test over 15 cm length.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electromagnetic wave absorption materials · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Recent progress in metallic glasses in Taiwan10.1016/j.intermet.2009.05.004 ↗
2. Sharpness improvement of surgical blade by means of ZrCuAlAgSi metallic glass and metallic glass thin film coating10.1016/j.intermet.2012.06.014 ↗
3. Fabrication and characterizations of thin film metallic glasses: antibacterial property and durability study for medical application10.1016/j.tsf.2013.08.111 ↗
4. Critical obstacle size to deflect shear banding in Zr-based bulk metallic glass composites10.1016/j.intermet.2015.05.001 ↗
5. Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe1-xCox)0.75B0.2Si0.05]96Nb4 system10.1016/j.actamat.2004.05.022 ↗
6. Structural amorphous steels10.1103/PhysRevLett.92.245503 ↗
7. Fe-based bulk metallic glasses with diameter thickness larger than one centimeter10.1557/JMR.2004.0176 ↗
8. Bulk glass formation in an Fe-based Fe-Y-Zr-M (M = Cr, Co, Al)-Mo-B system10.1557/jmr.2004.19.3.921 ↗
9. Effects of carbon content on the mechanical properties of amorphous steel alloys10.1016/j.scriptamat.2007.05.006 ↗
10. Effects of Mn addition on the magnetic property and corrosion resistance of bulk amorphous steels10.1016/j.jallcom.2007.09.139 ↗
11. Corrosion performances of a Nickel-free Fe-based bulk metallic glass in simulated body fluids10.1016/j.elecom.2009.09.027 ↗
12. Corrosion performances in simulated body fluids and cytotoxicity evaluation of Fe-based bulk metallic glasses10.1016/j.msec.2011.12.018 ↗
13. Bulk glassy Fe-Cr-Mo-C-B alloys with high corrosion resistance10.1016/S0010-938X(02)00002-1 ↗
14. Cr effects on magnetic and corrosion properties of Fe-Co-Si-B-Nb-Cr bulk glassy alloys with high glass-forming ability10.1016/j.intermet.2007.05.002 ↗
15. Prominent Fe-based bulk amorphous steel alloy with large supercooled liquid ron and superior corrosion resistance10.1016/j.jallcom.2013.09.186 ↗
16. Fabrication of bulk metallic glasses in the alloy system Fe-C-Si-B-P-Cr-Mo-Al using hot metal and industrial ferro-alloys10.1016/j.msea.2006.02.262 ↗
17. Exceptionally high glass-forming ability of an FeCoCrMoCBY alloy10.1063/1.1897426 ↗
18. Fe-based bulk metallic glasses with Y addition10.1016/j.jallcom.2006.08.190 ↗
19. Meyers · 2009
20. Metallic glass matrix composite with precipitated ductile reinforcement10.1063/1.1498864 ↗
21. Thermal and mechanical characterizations of a Zr-based bulk metallic glass composite toughened by in-situ precipitated Ta-rich particles10.1016/j.intermet.2009.10.010 ↗
22. Ta-particulate reinforced Zr-based bulk metallic glass matrix composite with tensile plasticity10.1016/j.scriptamat.2009.11.018 ↗
23. Significant plasticity enhancement of ZrCu-based bulk metallic glass composite dispersed by in situ and ex situ Ta particles10.1016/j.msea.2012.05.013 ↗
24. On the sharpness of straight edge blades in cutting soft solids: Part II – analysis of blade geometry10.1016/j.engfracmech.2009.10.003 ↗
25. A new approach to understanding and measuring glass formation in bulk amorphous materials10.1016/j.intermet.2004.04.032 ↗
26. New criterion of glass forming ability for bulk metallic glasses10.1063/1.2718286 ↗
27. XPS study on the surface films of a newly designed Ni-free Tibased bulk metallic glass10.1016/j.actamat.2006.10.054 ↗
28. A novel Ni-free Zr-based bulk metallic glass with enhanced plasticity and good biocompatibility10.1016/j.scriptamat.2006.06.018 ↗
29. Effect of tungsten, molybdenum, nickel and cobalt on the corrosion and wear performance of Fe-based metallic glass coatings10.1016/j.surfcoat.2018.07.078 ↗