journal article·2019-04

Microstructural evolution of laser-brazed joint of Mg2Si and HMS on DBC substrate for thermoelectric generator

Youngchai Lee, Changmin Lee, Hansaem Lee, Changhee Lee

Publisher page

Abstract

Abstract Joints properties of high temperature thermoelectric (TE) modules, which are composed of n-type Mg2Si and p-type higher manganese silicide (HMS), were investigated using the laser brazing process. In this process, the direct-bonded copper (DBC) and the TE materials were bonded using the Ag Cu based brazing filler metal. Heating and cooling rates were controlled by changing laser power and irradiation time gradually for preventing from thermal shock damage. The properties of joints were investigated by die shear test and microstructural analysis. As a result, improved joints of TE modules were fabricated through the laser brazing. Suitable heat input condition was deducted to optimize inter-diffusion between the filler metal and TE materials for obtaining reliable bond strength. In order to evaluate the high temperature stability, heat treatments were performed with TE modules using the furnace. As the heat treatment time increased, voids was formed at the joint but the diffusion distance of Cu and Ag did not increase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heusler alloys: electronic and magnetic properties · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effect of Sb doping on thermoelectric properties of chemically deposited bismuth selenide films10.1016/j.matchemphys.2008.11.026 ↗
2. Liquid metal based thermoelectric generation system for waste heat recovery10.1016/j.renene.2011.06.012 ↗
3. Modeling analysis of longitudinal thermoelectric energy harvester in low temperature waste heat recovery applications10.1016/j.apenergy.2014.12.005 ↗
4. Recent advances in CNT/graphene based thermoelectric polymer nanocomposite: a proficient move towards waste energy harvesting10.1016/j.rser.2015.09.004 ↗
5. A review on thermoelectric renewable energy: principle parameters that affect their performance10.1016/j.rser.2013.10.027 ↗
6. An energy-harvesting system using thermoelectric power generation for automotive application10.1016/j.ijepes.2014.12.045 ↗
7. Automotive applications of thermoelectric materials10.1007/s11664-009-0680-z ↗
8. Complex thermoelectric materials10.1038/nmat2090 ↗
9. Exploring Peltier effect in organic thermoelectric films10.1038/s41467-018-05999-4 ↗
10. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
11. Lead telluride as a thermoelectric material for thermoelectric power generation10.1016/S0921-4526(02)01187-0 ↗
12. Modeling and analysis of the effect of thermal losses on thermoelectric generator performance using effective properties10.1016/j.apenergy.2017.11.096 ↗
13. A review of thermoelectric cooling: materials, modeling and applications10.1016/j.applthermaleng.2014.01.074 ↗
14. Synthesis and thermoelectric properties of the (GeTe) 1-x (PbTe) x alloys10.1016/j.solidstatesciences.2010.11.045 ↗
15. Thermoelectric properties of bismuthantimonytelluride alloys obtained by reduction of oxide reagents10.1016/j.matchemphys.2016.04.039 ↗
16. Thermoelectric properties of HPHT sintered In-doped Pb0. 5Sn0. 5Te10.1016/j.jssc.2010.05.036 ↗
17. Fabrication and thermoelectric properties of Mg2Si-based composites using reduction reaction with additives10.1016/j.intermet.2012.08.026 ↗
18. Improved thermoelectric properties of Al-doped higher manganese silicide prepared by a rapid solidification method10.1007/s11664-011-1612-2 ↗
19. Silicon-rich higher manganese silicides for thermoelectric applications10.1007/s11664-012-1936-6 ↗
20. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
21. Nanostructuration via solid state transformation as a strategy for improving the thermoelectric efficiency of PbTe alloys10.1016/j.actamat.2011.07.049 ↗
22. Performance and reliability of commercially available thermoelectric cells for power generation10.1016/j.applthermaleng.2016.04.001 ↗
23. Reliable thermoelectric module design under opposing requirements from structural and thermoelectric considerations10.1007/s11664-017-5934-6 ↗
24. Joining of alumina and steel by a laser supported brazing process10.1016/j.ceramint.2007.11.007 ↗
25. Electroless Co-P diffusion barrier for n-PbTe thermoelectric material10.1016/j.jallcom.2017.09.051 ↗
26. Experimental and theoretical investigation of the residual stress distribution in brazed ceramic-steel components10.1016/0921-5093(94)90477-4 ↗
27. Influence of the brazing parameters on microstructure, residual stresses and shear strength of diamond–metal joints10.1007/s10853-010-4260-7 ↗
28. Brazing copper and alumina metallized with Ti-containing Sn0. 3Ag0. 7Cu metal powder10.1016/j.matdes.2015.08.081 ↗