Microstructure and high-temperature electrochemical characteristics of Zr0.9Ti0.1Ni1.0Mn0.7V0.3Six (x = 0.05, 0.10, 0.15, 0.20) alloy
Source abstract
Abstract
Abstract The crystal structure, the phase composition and electrochemical characteristics of non-stoichiometric Zr 0.9 Ti 0.1 Ni 1.0 Mn 0.7 V 0.3 Si x ( x =0.05, 0.10, 0.15, 0.20) alloys under high temperature were investigated by means of XRD, SEM, EDS and electrochemical measurements. It was shown that Si addition greatly improved high-temperature electrochemical characteristics of the AB 2 Laves phase alloys. At 338 K, the discharge capacity of Zr 0.9 Ti 0.1 Ni 1.0 Mn 0.7 V 0.3 Si 0.10 alloy reached 249 mAh g −1 , and the charge retention was 94.20% for 24 h, and the capacity retention for 300 charge/discharge cycles was 45.17%. The improvement in the high-temperature electrochemical characteristics of the alloy was attributed to the formation of the Zr-rich second phase in the matrix and the increasing stability of AB 2 -type Laves phase alloy hydride due to Si addition in alloy. They seem to be also related with the formation of a compact silicon oxide film on the alloy surface, which increases the corrosion resistance performance of the alloy in KOH solution. At high temperature, the main cause of further decreasing of alloy cycle stability may be due to the corrosion and the oxidising deteriorate on alloy surface, and the expansion ratio of crystal cell volume probably is not a critical effect on the cycle stability of alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Development of advanced nickel/metal hydride batteries for electric and hybrid vehicles10.1016/S0378-7753(99)00070-1 ↗
2. Power requirements for batteries in hydride electric vehicles10.1016/S0378-7753(00)00483-3 ↗
3. Theoretical evaluation for thermodynamic stability of constituents of Mm-based hydrogen storage alloy in 6M KOH solution at relatively high temperatures10.1016/S0925-8388(98)00739-7 ↗
4. Electrochemical and X-ray photoelectron spectroscopy characterization of surface films on MmNi3.5Al0.8Co0.710.1149/1.1837025 ↗
5. Degradation mechanism of Ti–Zr–V–Mn–Ni metal hydride electrodes10.1016/S0925-8388(97)00132-1 ↗
6. Degradation behavior of Cu-coated Ti–Zr–V–Mn–Ni metal hydride electrodes10.1016/S0925-8388(97)00453-2 ↗
7. Some factors affecting the cycle lives of LaNi5-based alloy electrodes of hydrogen batteries10.1016/0022-5088(90)90027-H ↗
8. The effect of the particle pulverization on electrochemical properties of Laves phase alloys10.1016/S0013-4686(00)00401-1 ↗
9. The influence of small amounts of added elements on the electrode performance characteristics for Ti3Ni2 hydrogen storage alloy10.1016/S0254-0584(01)00282-6 ↗
10. Effect of temperature on the discharge capacity of the Laves alloy used in nickel/metal-hydride batteries10.1016/S0378-7753(98)00176-1 ↗