journal article·2008-12

Microstructure and properties of nano-Al2O3 particle reinforced Ni–Cr–Mo–Cu composite alloying layer

Jiang Xu, Jie Tao, Shuyun Jiang

Materials Chemistry and Physics· Volume 112· Issue 3
Publisher page

Abstract

Abstract In order to improve the corrosion and wear resistance of 316L stainless steel (SS) in engineering application, Ni–Cr–Mo–Cu composite alloying layer reinforced by the nano-Al 2 O 3 particles was prepared by double glow plasma alloying on 316L stainless steel surface, where Ni/nano-Al 2 O 3 was firstly predeposited by brush plating. The composition and microstructure of composite alloying layer were analyzed by means of SEM, TEM and XRD. The results indicated that under alloying temperature (1000 °C) condition, the added nano-Al 2 O 3 was partially dissolved into γ-Ni based solution matrix, resulting in γ-prime (Ni 3 Al) phase precipitation. The γ-prime phase grew in a unique crystallographic orientation relationship with the γ-Ni based solution matrix. This crystallographic relationship can be described as ( 1 1 1 ) γ -Ni // ( 1 1 1 ) γ ′ -N i 3 Al . The corrosion resistance of the composite alloying layer was investigated electrochemically in 3.5% NaCl solution and in 5% HCl solution, and 100-h immersion tests in a 20% HCl solution. Compared with Ni–Cr–Mo–Cu alloying layer, nano-Al 2 O 3 particles and in situ synthesized γ-prime phase slightly decrease the corrosion resistance of the alloying layer. The dry wear test results showed that the wear weight loss of composite alloying layer was 45% and 65% less than that of 316L stainless steel and Ni–Cr–Mo–Cu alloying layer, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Guenbour · Appl. Surf. Sci. · 2006 · 253 · 236210.1016/j.apsusc.2006.05.005 ↗
2. Das · Wear · 2006 · 261 · 18010.1016/j.wear.2005.09.013 ↗
3. Neville · Wear · 1995 · 186–187 · 495
4. Walker · Wear · 2000 · 242 · 14010.1016/S0043-1648(00)00413-0 ↗
5. Jiang · J. Mater. Sci. Technol. · 2003 · 19 · 40410.1179/026708303225008680 ↗
6. Jiang · Surf. Coat. Technol. · 2003 · 168 · 14210.1016/S0257-8972(03)00008-2 ↗
7. Jiang · Surf. Coat. Technol. · 2003 · 168 · 15610.1016/S0257-8972(02)00861-7 ↗
8. Xu · Vacuum · 2004 · 74 · 489
9. Xu · Mater. Chem. Phys. · 2005 · 92 · 34010.1016/j.matchemphys.2004.10.050 ↗
10. Xu · Surf. Rev. Lett. · 2005 · 12 · 56910.1142/S0218625X05007451 ↗
11. Yang · Surf. Coat. Technol. · 2000 · 132 · 13010.1016/S0257-8972(00)00909-9 ↗
12. Hidouci · Surf. Coat. Technol. · 2000 · 123 · 1710.1016/S0257-8972(99)00394-1 ↗
13. Chong · Surf. Coat. Technol. · 2002 · 154 · 26810.1016/S0257-8972(01)01719-4 ↗
14. Herrera · Surf. Coat. Technol. · 1998 · 108–109 · 30810.1016/S0257-8972(98)00662-8 ↗
15. Mchimann · Surf. Coat. Technol. · 1990 · 42 · 27510.1016/0257-8972(90)90158-9 ↗
16. Xu · Surf. Rev. Lett. · 2005 · 12 · 56110.1142/S0218625X05007438 ↗
17. Schwind · Acta Mater. · 2000 · 48 · 247310.1016/S1359-6454(00)00069-0 ↗
18. Cavazos · Mater. Charact. · 2006 · 56 · 9610.1016/j.matchar.2005.05.006 ↗
19. Vaezi · Colloids Surf. A: Physicochem. Eng. Aspects · 2008 · 315 · 17610.1016/j.colsurfa.2007.07.027 ↗
20. Tian · Electrochim. Acta · 2007 · 53 · 51110.1016/j.electacta.2007.07.013 ↗
21. Ai · Appl. Surf. Sci. · 2003 · 206 · 23010.1016/S0169-4332(02)01222-9 ↗
22. Xu · J. Univ. Sci. Technol. B · 2004 · 11 · 151