Internal stresses and microstructures of commercial thick diamond films deposited by different deposition methods
Source abstract
Abstract
Structures and stress state of six commercial freestanding thick diamond films (>300 μm) were analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and Raman spectroscopy. These films represent the typical samples synthesized by three different chemical vapor deposition (CVD) methods, including DC arc, microwave plasma, and hot filament. It was found that the higher diamond deposition rate it reaches, the more non-diamond carbons it contains, and the larger the residual compressive stress it possesses. Moreover, the samples with the highest degree of optical transparency are under the lowest compressive stress. These crystal characteristics can be manipulated by selecting different deposition methods and parameters that affect nucleation rate and growth rate of diamond. The present results show that the DC arc method gives poorly developed crystals, and its residual compressive stress of the films is the highest due to the fastest diamond nucleation and crystal growth rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Bahr · Diam. Relat. Mater. · 1996 · 5 · 146210.1016/S0925-9635(96)00567-5 ↗
2. Laimer · Diam. Relat. Mater. · 1997 · 6 · 40610.1016/S0925-9635(96)00589-4 ↗
3. Sawabe · Thin Solid Films · 1986 · 137 · 8910.1016/0040-6090(86)90197-5 ↗
4. Ece · Diam. Relat. Mater. · 1996 · 5 · 21110.1016/0925-9635(95)00420-3 ↗
5. Kobashi · Phys. Rev. B · 1988 · 38 · 406710.1103/PhysRevB.38.4067 ↗
6. V.G. Ralchenko, A.A. Smolin, V.I. Konov, K.F. Sergeichev, I.A. Sychov, et al., Diam. Relat. Mater. 6 (1997) 417.10.1016/S0925-9635(96)00619-X ↗
7. F. Tagusakawa, Ames Laboratory, Iowa State University, Ames, IA, Unpublished result.
8. Lu · Physica C · 1997 · 276 · 7510.1016/S0921-4534(97)00009-9 ↗
9. Baglio · Thin Solid Films · 1992 · 212 · 18010.1016/0040-6090(92)90518-G ↗
10. Wanlu · Thin Solid Films · 1992 · 215 · 17410.1016/0040-6090(92)90433-C ↗
11. Bachmann · Diam. Relat. Mater. · 1994 · 3 · 130810.1016/0925-9635(94)90143-0 ↗
12. LeGrice · Mater. Res. Soc. Symp. Proc. · 1990 · 162 · 21910.1557/PROC-162-219 ↗
13. Johnson · Diam. Relat. Mater. · 1992 · 1 · 45010.1016/0925-9635(92)90145-E ↗
14. Silveira · Diam. Relat. Mater. · 1993 · 2 · 125710.1016/0925-9635(93)90005-M ↗
15. Spear · J. Mater. Res. · 1990 · 5 · 227710.1557/JMR.1990.2277 ↗
16. Mitra · Phys. Rev. B · 1969 · 186 · 94210.1103/PhysRev.186.942 ↗
17. Boppart · Phys. Rev. B · 1985 · 32 · 142310.1103/PhysRevB.32.1423 ↗
18. Yoshikawa · Appl. Phys. Lett. · 1993 · 62 · 314410.1063/1.109154 ↗
19. Van Acker · Mater. Res. Soc. Symp. Proc. · 1993 · 308 · 67710.1557/PROC-308-677 ↗
20. Kuo · Thin Solid Films · 1996 · 290–291 · 25410.1016/S0040-6090(96)09016-5 ↗
21. R. Berman, Physical Properties of Diamond, Clarendon Press, Oxford, 1965.