A cost-effective process for large-scale production of submicron SiC by combustion synthesis
Source abstract
Abstract
Abstract In this paper, a cost-effective process was developed for large-scale production of submicron SiC by the combustion synthesis. Large and thin reactant samples (120×120×6 mm 3 ) were prepared from ground reactant powders of silicon and carbon black. In order to reduce the cost of the expensive silicon powders, different particle sizes were used. Prior to the cold press of the reactant sample, a small amount of PVA (polyvinyl alcohol) slurry, which served as a binder, was added into the mixed reactant powders. The reactant samples were combusted by a custom-built oxy-acetylene torch in air. The averaged reaction yield throughout the product was about 94%. If the molar ratio between carbon black and silicon was increased from 1 to 1.1, the averaged yield raised to about 97%. Further increase of the molar ratio could not raise the yield. The product consisted of β-SiC with a trace of α-SiC. The grain size of SiC was around 0.2 μm and the morphology showed that SiC particles were aggregated. In some cases, the aggregated SiC particles were sintered together. Particle size distribution of SiC powders before and after grinding were both narrow. The averaged particle size of both SiC powders were approximately 0.25 μm. Using different particle sizes of starting silicon powders all resulted in the similar combustion results. The questions, why submicron SiC powders were produced and why starting particle sizes of silicon powders did not change the combustion products were discussed. Further reductions of process cost and proposals of continuous production lines were also addressed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. A.G. Merzhanov, in: Z.A. Munir, J.B. Holt (Eds.), Combustion and Plasma Synthesis of High-temperature Materials, VCH, New York, 1990.
2. Munir · Am. Ceram. Soc. Bull. · 1988 · 67 · 342
3. Merzhanov · Pure Appl. Chem. · 1992 · 64 · 94110.1351/pac199264070941 ↗
4. Hlavacek · Am. Ceram. Soc. Bull. · 1991 · 70 · 240
5. Varma · Chem. Eng. Sci. · 1992 · 47 · 217910.1016/0009-2509(92)87034-N ↗
6. V.M. Martinenko, I.P. Borovinskaya, in: Proceedings of the Third All-Union Conference on Tech. Combs., Chernogolovka, 1990, p. 180.
7. Yamada · J. Mater. Res. · 1986 · 1 · 27510.1557/JMR.1986.0275 ↗
8. Pampuch · J. Am. Ceram. Soc. · 1989 · 72 · 143410.1111/j.1151-2916.1989.tb07667.x ↗
9. Yamada · J. Am. Ceram. Soc. · 1989 · 72 · 1734
10. Nersisyan · Fiz. Gor. I Vzryva · 1991 · 27 · 77
11. Bhaumik · J. Mater. Res. · 1999 · 14 · 90610.1557/JMR.1999.0121 ↗
12. Kharatyan · Int. J. SHS · 1994 · 3 · 17
13. Yamada · Am. Ceram. Soc. Bull. · 1985 · 64 · 319
14. Feng · Metal. Mater. Trans. B · 1995 · 26 · 58710.1007/BF02653879 ↗
15. Narayan · J. Appl. Phys. · 1994 · 75 · 725210.1063/1.356660 ↗
16. Wu · J. Mater. Sci. · 1999 · 34 · 435710.1023/A:1004652230297 ↗