journal article·2025-11Open access

Effect of laser induced remelting on the scratch behavior of spark plasma sintered nickel aluminide alloy

Gülşah Aktaş Çelik, Fatih Aksu, F. Betül Yılmaz Güler, Satılmış Ürgün, Sinan Fidan, M. Özgür Bora, Yunus Erbay, Ş. Hakan Atapek

Abstract

Nickel aluminide (NiAl) alloys produced by spark plasma sintering (SPS) present high potential for high-temperature application due to their superior mechanical and oxidation properties. However, their intrinsic brittleness and susceptibility to wear require treatment of their surface. In this work, the impact of laser-induced remelting (LIR) on the scratch behavior of SPS-processed NiAl alloys under different conditions of processing is studied. The parameters of laser power (30, 50, and 75 W), scanning speed (1000 and 2000 mm/s), and processing atmospheres (air and argon) were modified in sequence to investigate microstructure development and mechanical performance. Thermodynamic simulation of phase stability and solidification paths using Thermo-Calc software determined equilibrium phase stability and solidification paths. Scheil simulations proved Al depletion in remelt zones, which modified phase balance of NiAl and Ni3Al. The phase transition was proved using X-ray Diffractometer (XRD), while microstructure refinement and redistributions in elements were identified using scanning electron microscope (SEM) and energy-dispersive X-ray spectrometer (EDS). The scratch tests indicated that LIR significantly enhanced scratch resistance, which reduced wear depth by up to 40 % at loads of 5 N and 15 N. The smooth topography of surfaces upon remelting was proved using 3D profilometry. The findings indicate high potential of using LIR to generate designed NiAl surface properties for application in aerospace and high-performance engineering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Reactive synthesis of CNTs reinforced nickel aluminide composites by spark plasma sintering10.1016/j.msea.2020.140070 ↗
2. EBfects of carbon nanotube weight fraction on the fracture toughness of spark plasma sintered nickel aluminide-NiAl310.1016/j.matpr.2019.12.233 ↗
3. Reactive spark plasma sintering of NiAl intermetallics: a comparative study10.1016/j.intermet.2022.107750 ↗
4. Microstructure and properties of NiAl/TiC composite synthesized by spark plasma sintering of mechanically activated elemental powders10.1016/j.ceramint.2023.01.163 ↗
5. Reactive spark plasma sintering: successes and challenges of nanomaterial synthesis10.1155/2013/625218 ↗
6. Combustion synthesis and the electric field: a review, int. J. self-propag. high-temp
7. Reactive spark plasma sintering of exothermic systems: a critical review10.1016/j.ceramint.2021.10.207 ↗
8. Fabrication of intermetallic NiAl by self-propagating high-temperature synthesis reaction using aluminium nanopowder under high pressure10.1088/0953-8984/14/44/421 ↗
9. Influence of process parameters on the sintering behaviour and densification of NiAl intermetallics fabricated by spark plasma sintering10.1016/j.matpr.2020.07.142 ↗
10. SBructure and properties of an Ni3Al intermetallic compound formed as a result of spark plasma sintering of the powder mixtures prepared by various methods10.1007/s11015-022-01273-7 ↗
11. Sliding friction and wear behaviour of several nickel aluminide alloys under dry and lubricated conditions10.1016/0301-679X(90)90027-M ↗
12. A novel intermetallic nickel aluminide (Ni3Al) as an alternative automotive body material
13. Effect of heating rate on the microstructure and mechanical properties of spark plasma sintered CNTs reinforced nickel aluminide10.4028/www.scientific.net/KEM.821.440 ↗
14. MBcrostructure and mechanical properties of spark plasma sintered nanocrystalline Ni3Al-xB (0.0<x<1.5 at%) alloy10.1016/j.mtcomm.2018.09.002 ↗
15. IBfluences of laser remelting treatments on microstructure and tensile properties of multiphase Ni3Al-based intermetallic alloy10.1016/j.msea.2022.144087 ↗
16. Rapid solidification and surfaces alloying using continuous CO2 laser to generate Ni-aluminide on steel10.4028/www.scientific.net/KEM.875.329 ↗
17. MBcrostructure and properties of Ni3Al-TiC surface composites formed on Ni3Al using low-energy high-current electron beam10.1016/j.vacuum.2024.113606 ↗
18. OBtimizing the electrochemical corrosion performance of laser cladded Ni-based single crystal superalloy via manipulation of γ′(Ni3Al) phase10.1016/j.surfcoat.2023.129700 ↗
19. TBe effect of laser power on the microstructure and wear resistance of a Ni3Al-based alloy cladding layer deposited via laser cladding10.3390/coatings14030317 ↗
20. Non-uniform high-temperature oxidation behavior of twin wire and arc additive manufactured Ni3Al-based alloy10.1016/j.jmapro.2022.10.035 ↗
21. Tribological properties and self-compensating lubrication mechanisms of Ni3Al matrix bio-inspired shell-like composite structure10.1016/j.apsusc.2021.151462 ↗
22. Microstructure and wear resistance of a Cr7C3 reinforced Ni3Al composite coating prepared by laser cladding10.3390/coatings12010105 ↗
23. Effects of laser remelting on frictional properties of supersonic flame-sprayed coatings10.3390/coatings14030325 ↗
24. Microstructure and wear properties of laser treated Ni3Al coatings on low alloy medium carbon steel10.1007/s40516-018-0065-3 ↗
25. Tribological behavior of boron nitride nanoplatelet reinforced Ni3Al intermetallic matrix composite fabricated by selective laser melting10.1016/j.matdes.2018.107579 ↗
26. Evaporation-induced gas-phase flows at selective laser melting10.1007/s00339-017-1532-y ↗
27. Thermofluid field of molten pool and its effects during selective laser melting (SLM) of inconel 718 alloy
28. Numerical analysis of molten pool behavior and spatter formation with evaporation during selective laser melting of 316L stainless steel10.1007/s11663-019-01641-w ↗
29. Molecular dynamics simulations of the melting curve of NiAl alloy under pressure10.1063/1.4876515 ↗
30. Oxidation behaviour of NiAl—Ii. Cavity formation beneath the oxide scale on NiAl of different stoichiometries10.1016/0010-938X(93)90271-H ↗
31. Inter-diffusion and oxidation behavior in electron-beam evaporated NiAl coatings10.1016/j.vacuum.2006.05.010 ↗
32. Solidification microstructure maps in NiAl alloys10.1016/S1359-6454(97)00194-8 ↗
33. First-principles determination of the Ni-Al phase diagram10.1088/0953-8984/4/4/005 ↗
34. Accurate prediction of the solid-state region of the Ni-Al phase diagram including configurational and vibrational entropy and magnetic effects10.1016/j.actamat.2023.118962 ↗
35. Spark plasma sintering of mechanically activated Ni and Al powders10.4028/www.scientific.net/AMR.1040.772 ↗
36. Thermal stability of Ni3Al microstructure and microhardness after spark plasma sintering10.1016/j.intermet.2023.108105 ↗
37. The influence of heating rate on the microstructural evolutions and mechanical properties of spark plasma sintered multi-walled carbon nanotubes reinforced NiAl intermetallic matrix composites10.1016/j.msea.2019.138869 ↗
38. NiAl intermetallic Composites—A review of processing methods, reinforcements and mechanical properties10.1007/s00170-019-03984-9 ↗
39. Corrosion resistance of nickel-aluminum sinters produced by high-pressure HPHT/SPS method10.3390/ma16051907 ↗
40. Modelling thermal conductivity of al-fe, al-ni, and Al-Co spark plasma sintered (SPS) alloys
41. Study of mechanisms of the spark plasma sintering technique
42. Effects of the powder, laser parameters and surface conditions on the molten pool formation in the selective laser melting of IN71810.1016/j.jmatprotec.2020.116930 ↗
43. Experimental investigation on surface structuring by laser remelting (WaveShape) on inconel 718 using varying laser beam diameters and scan speeds10.1016/j.apsusc.2020.147814 ↗
44. Suppression effect of a steady magnetic field on molten pool during laser remelting10.1016/j.apsusc.2015.05.179 ↗
45. Design surfaces by laser remelting10.1016/j.phpro.2011.03.053 ↗
46. Numerical and experimental study on the molten pool dynamics and fusion zone formation in multi-pass narrow gap laser welding10.1016/j.optlastec.2020.106081 ↗
47. Heat transfer, molten pool flow micro-simulation, and experimental research on molybdenum alloys fabricated via selective laser melting10.3390/ma14010075 ↗
48. Microstructure and hardness of laser remelted surfaces of Al-5%Cu and Al-4%Cu-1%Ni alloys10.1016/j.jallcom.2023.170189 ↗
49. Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4V, finite elem
50. Understanding melt pool characteristics in laser powder bed fusion: an overview of single- and multi-track melt pools for process optimization
51. Formation optimization of downward overlaid inconel 625 on curved surface of X65 pipeline basing on dynamic behavior of molten pool10.1016/j.jmrt.2023.07.084 ↗
52. The mystery of molten metal
53. Surface tension and its temperature coefficient of molten tin determined with the sessile drop method at different oxygen partial pressures10.1016/j.jcis.2009.05.004 ↗
54. Effects of melt-pool geometry on crystal growth and microstructure development in laser surface-melted superalloy single crystals: mathematical modeling of single-crystal growth in a melt pool (part I)
55. Research on formation mechanism of laser cladding micro-melt pool based on multi-model coupling simulation technology
56. Mills · 1999
57. Comprehensive study on mechanisms for grain morphology evolution and texture development in powder bed fusion with electron beam of co-cr-mo alloy10.1016/j.mtla.2019.100346 ↗
58. Melting and remelting phenomena10.1179/174328009X392930 ↗
59. Remelting-induced anomalous eutectic formation during solidification of deeply undercooled eutectic alloy melts10.1016/j.actamat.2015.05.014 ↗
60. A short review on the microstructure, transformation behavior and functional properties of NiTi shape memory alloys fabricated by selective laser melting10.3390/ma11091683 ↗
61. Common nonferrous metals
62. Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling10.1016/j.jmrt.2022.07.121 ↗
63. Advancements in 3D printing: directed energy deposition techniques, defect analysis, and quality monitoring
64. Laser material processing10.1179/1743280411Y.0000000003 ↗
65. Modeling of surface phenomena of liquid Al-Ni alloys using molecular dynamics10.1038/s41598-023-31844-w ↗
66. Surface modification of high-carbon steel using fiber laser and its thermal, microstructural and tribological analysis10.1007/s11665-019-03943-1 ↗
67. Laser-based surface modifications of aluminum and its alloys10.1080/10408436.2015.1076716 ↗
68. Deformation mechanisms of interfacial dislocation networks in Ni/Ni3Al/Ni alloy under different directions based on molecular dynamics simulation10.1016/j.vacuum.2025.114144 ↗
69. Structure and mechanical properties of NiAl and Ni3Al-based alloys10.1016/S0020-7403(99)00087-9 ↗
70. Severe plastic deformation of four FCC metals during friction under lubricated conditions
71. Intermetallic eutectic alloys in the ni-al-zr system with attractive high temperature properties10.1051/matecconf/20141401005 ↗
72. Recent progress on wear-resistant materials: designs, properties, and applications10.1002/advs.202003739 ↗
73. Effect of partial and global shielding on surface-driven phenomena in keyhole mode laser beam welding10.1007/s40194-023-01627-y ↗
74. On wear mechanisms and microstructural changes in nano-scratches of FCC metals
75. A study on the scratch behavior and two-body abrasion wear resistance of TiC-modified E690 steel cladding10.1016/j.wear.2025.205923 ↗
76. Scratch-induced deformation behavior of wire-arc directed energy deposited α-Titanium10.3390/ma18030724 ↗
77. Recent progress in laser additive manufacturing of intermetallic alloys: defects, microstructure, and mechanical properties