Nanometer-scale interface instability in silicon oxide/polymer sandwich structures detected after two years
Source abstract
Abstract
Nonthermal plasma-deposited glassy silica is often used as a gas barrier film to protect polymer material in many applications. This study revealed that glassy silica is a slightly porous material (3 vol%) with small pores (2.5 nm) formed during thin film deposition. The infrared spectrum shows that the as-deposited plasma silica contains gaseous carbon dioxide , which is likely encapsulated in the pores. It can be assumed that these CO 2 molecules diffuse from the silica layer through the silicon oxide/polymer interface into the protected polymer material. The low crosslinked polymer material is then locally oxidized by CO 2 , which changes its chemical and physical properties. This means that the silicon oxide/polymer interface gradually moves into the polymer material over time. CO 2 diffusion is therefore considered responsible for a shift of the silicon oxide/polymer interface by 30–35 nm after 27 months.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Plasma deposition to improve barrier performance of biodegradable and recyclable substrates intended for food packaging10.3390/plasma5040033 ↗
2. Investigating an effective model to estimate the water diffusion coefficient of a hybrid polymer-oxide coating
3. Newly fabricated ternary PAAm-PVA-PVP blend polymer doped by SiO2: absorption and dielectric characteristics for solar cell applications and antibacterial activity10.1007/s12633-023-02477-5 ↗
4. Recent advances in encapsulation of flexible bioelectronic implants: materials, technologies, and characterization methods10.1002/adma.202201129 ↗
5. High-gas-barrier film for organic light-emitting diode lighting
6. Properties of plasma enhanced chemical vapor deposition barrier coatings and encapsulated polymer solar cells10.1088/1009-0630/16/1/10 ↗
7. Gas permeation in silicon-oxide/polymer (SiOx/PET) barrier films: role of the oxide lattice, nano-defects and macro-defects10.1016/S0376-7388(02)00178-3 ↗
8. Influence of film structure and composition on diffusion barrier performance of SiOx thin films deposited by PECVD10.1016/j.surfcoat.2005.03.044 ↗
9. Mechanisms of oxygen permeation through plastic films and barrier coatings10.1088/1361-6463/aa8525 ↗
10. Analysis of polymer/oxide interfaces under ambient conditions – an experimental perspective10.1016/j.apsusc.2018.02.155 ↗
11. Oxygen and water vapor gas barrier poly(ethylene naphthalate) films by deposition of SiOx plasma polymers from mixture of tetramethoxysilane and oxygen10.1002/app.25802 ↗
12. Improvement of water and gas barrier properties of polycarbonate by the SiOx plasma treatment
13. The influence of microstructure on nanomechanical and diffusion barrier properties of thin PECVD SiOx films deposited on parylene C substrates10.3389/fmats.2019.00319 ↗
14. Plasma nanotechnology for controlling chemical and physical properties of organosilicon nanocoatings
15. Plasma polymer films: from nanoscale synthesis to macroscale functionality
16. Glass fibers: plasma modification for improved interfacial adhesion
17. Chemical depth profile of layered a-CSiO:H nanocomposites10.1016/j.apsusc.2018.06.227 ↗
18. Vinyl-based interlayers synthesized by variable pulsed plasma for polymer composites
19. RF‐plasma deposited amorphous hydrogenated hard carbon thin films: preparation, properties, and applications10.1063/1.332613 ↗
20. Nonthermal tetravinylsilane plasma used for thin-film deposition: Plasma chemistry controls thin-film chemistry10.1002/ppap.202100192 ↗
21. Mayer · 2010
22. Parameterization of the optical functions of amorphous materials in the interband region10.1063/1.118064 ↗
23. Fujiwara · 2007
24. Correlation between mechanical, optical and chemical properties of thin films deposited by PECVD10.1016/j.surfcoat.2008.06.031 ↗
25. Elastic modulus and hardness of plasma-polymerized organosilicones evaluated by nanoindentation techniques10.1002/ppap.201500036 ↗
26. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
27. Stability of scattered hydrogen signals from a-C:H films during He-induced elastic recoil detection analysis10.1016/j.nimb.2021.05.019 ↗
28. Change of hydrogen concentration after ion beam irradiation on polyimide films with 100–400 °C annealing10.1016/j.nimb.2006.03.104 ↗
29. Investigation of chemical changes in PMMA induced by 1.6 MeV He+ irradiation by ion beam analytical methods (RBS-ERDA) and infrared spectroscopy (ATR-FTIR)10.1016/j.nimb.2018.05.016 ↗
30. Cross-sectional hydrogen content and mass density profiles of diamond-like carbon film by neutron and X-ray reflectivity10.1016/j.diamond.2009.09.017 ↗
31. Lin-Vein · 1991
32. Tolstoy · 2003
33. Aging process in plasma-polymerized organosilicon thin film10.1080/00222338508063316 ↗
34. Free radical-induced grafting from plasma polymers for the synthesis of thin barrier coatings10.1039/C4RA16424E ↗
35. Aging of 1,3-diaminopropane plasma-deposited polymer films: mechanisms and reaction pathways10.1002/(SICI)1099-0518(19990701)37:13<2191::AID-POLA34>3.0.CO;2-F ↗
36. Thin film encapsulation for flexible AM-OLED: a review10.1088/0268-1242/26/3/034001 ↗
37. Defect-permeation correlation for ultrathin transparent barrier coatings on polymers10.1116/1.582156 ↗
38. Mitchell · 2004
39. 2002
40. Non thermal plasma assisted water-gas shift reactions under mild conditions: state of the art and a future perspective10.1016/j.cattod.2022.11.017 ↗
41. Plasma treating mixed metal oxides to improve oxidative performance via defect generation10.3390/ma12172756 ↗
42. Inline monitoring of hydrogenous plasma-induced defect formation within fused silica via plasma emission spectroscopy10.1007/s00339-020-3347-5 ↗
43. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
44. Ab initio formation energies of point defects in pure and Ge-doped SiO210.1103/PhysRevB.56.7304 ↗
45. Inagaki · 1996
46. Street · 1991
47. Carbon dioxide capture in homogeneous and heterogeneous surfaces of porous silica glass10.3390/pr8101260 ↗
48. Adsorption of carbon dioxide in plasma polymers prepared from silicon compounds and carbon dioxide separation membrane10.1007/BF00296086 ↗
49. Yasuda · 1985
50. Reaction of CO2 gas with (radicals in) plasma-polymerized acrylic acid (and formation of COOH-rich polymer layers)10.1002/ppap.201500128 ↗
51. CO2 and C2H4 grafting to the native defects of ion-bombarded porous silica10.1007/s003390050850 ↗
52. Chapter Five - CO2 capture, reduction, and utilization by silicon and aluminum compounds and their mechanistic ways10.1016/bs.adioch.2023.08.007 ↗
53. Carbon content of silicon oxide films deposited by room temperature plasma enhanced chemical vapor deposition of hexamethyldisiloxane and oxygen10.1116/1.579323 ↗
54. Optical and structural properties of low-temperature PECVD ETMS SiOx thin films10.1016/S0040-6090(98)01123-7 ↗
55. Inorganic to organic crossover in thin films deposited from O2/TEOS plasmas10.1016/S0022-3093(00)00232-5 ↗
56. PECVD coatings: analysis of the interface with the metallic substrate10.1002/sia.2168 ↗
57. How the chemical structure of the plasma-deposited SiOx film modifies its stability and barrier properties: FTIR study
58. A basic introduction to Grazing incidence small-angle X-Ray scattering
59. Probing surface and interface morphology with Grazing Incidence Small Angle X-Ray Scattering10.1016/j.surfrep.2009.07.002 ↗
60. Glatter · 1982
61. The calculation of various physical constants of heterogeneous substances: I. The dielectric constant and conductivities of mixtures composed of isotropic substances10.1002/andp.19354160705 ↗
62. Refractiveindex.info database of optical constants10.1038/s41597-023-02898-2 ↗
63. Mehrer · 2007
64. Crank · 1975