journal article·2024-11Open access

Insights into the carbon structure, thermal properties and environmental friendliness of composites produced using coal tar pitch and dimethylpolysiloxane as binders for coal waste

Mhlawakhe Vatsha, Orevaoghene Eterigho-Ikelegbe, Samson Bada

Abstract

This study introduces modified coal tar pitch (CTP) and dimethylpolysiloxane (DMPS) polymer as resins for the fixation of carbon-containing wastes into value-added composites. Secondary heat treatment of coal tar at 400 °C with a residence time of 9 h using the air-blowing pretreatment method yielded CTP with a hydrogen-to-carbon ratio of 0.4 and total carbon content (77 %–95 %). The effects of blending coal tar pitch to coal waste regarding the carbon structure, thermal stability, flame ablation rates, corrosion resistance, and leaching potential of coal composites were systematically investigated. The CTP-based composites have more ordered carbon structures compared to the DMPS-based composites. The composites are thermally stable up to 600 °C, beyond which they degrade rapidly. Composites containing 10 % CTP recorded the lowest linear and mass ablation rates. Interestingly, DMPS-based composites recorded higher corrosion rates compared to CTP-based composites. Finally, metal ion contaminants in the composites were below the low-risk threshold, suggesting these wastes can be bound in the composites in that they pose minimal environmental risks. Overall, the CTP binder is better than DMPS for producing composite materials that may serve as carbon sinks for coal waste. The combination of high thermal stability, low resistance to corrosion, low ablation rates, and low susceptibility to leaching suggests that the composites could be shaped into building materials such as tiles or pavers.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effect of different parameters on porosity and compressive strength of coal tar pitch derived carbon foam10.1016/j.diamond.2019.04.009 ↗
2. The recent progress in pitch derived carbon fibers applications. A Review10.1016/j.sajce.2021.07.001 ↗
3. Carbon foams prepared from coal tar pitch for building thermal insulation material with low cost10.1016/j.cjche.2017.04.012 ↗
4. Fabrication of coal tar pitch–derived reticulated carbon foam as oxidation-resistant thermal insulation10.1016/j.jaap.2019.104643 ↗
5. Development of graphite anodes from coal derived carbon from pitch10.1149/MA2023-012471mtgabs ↗
6. Adjusting hydrophily and aromaticity strategy for pitch-based hierarchical porous carbon and its application in flexible supercapacitor10.1016/j.fuel.2021.122514 ↗
7. Pre-oxidized mesophase pitch modified phenolic composites with mosaic-structured char layers and excellent ablation resistance10.1016/j.compositesb.2023.110691 ↗
8. Hill
9. Al-Majali · 2023
10. Coal-Filler-based thermoplastic composites as construction materials: a new sustainable end-use application10.1021/acssuschemeng.9b04453 ↗
11. Mechanical performance assessment of sustainable coal plastic composite building materials
12. Flammability and thermal stability of thermoplastic-based composites filled with natural carbon10.1177/07349041221082928 ↗
13. Mechanical performance of thermoplastic composites using bituminous coal as filler: study of a potentially sustainable end-use application for Appalachian coal10.1002/pc.24696 ↗
14. 3D printing of sustainable coal polymer composites: study of processing, mechanical performance, and atomistic matrix–filler interaction10.1021/acsapm.3c01784 ↗
15. 3D Printing of sustainable coal polymer composites: thermophysical characteristics
16. Polydimethylsiloxane composites characterization and its applications: a review10.3390/polym13234258 ↗
17. A novel composite material for flexible wearable devices based on eutectic gallium indium (EGaIn), multi-walled carbon nanotubes (MWCNTs) and polydimethylsiloxane (PDMS)10.1016/j.compstruct.2022.115653 ↗
18. A study of the efficacy and structural performance of modified coal tar and dimethylpolysiloxane as binders for coal-carbon composites10.1016/j.jaap.2024.106625 ↗
19. Effect of mesophase pitch incorporation on the ablation behavior and mechanism of phenolic composites10.1021/acs.iecr.2c00367 ↗
20. Method 1311 Toxicity characteristic leaching procedure SW-846. United States Environmental Protection Agency.Retrieved April 25, 2024, from https://www.epa.gov/sites/default/files/2015-12/documents/1311.pdf.
21. Leachate analysis of heavy metals in cigarette butts and bricks incorporated with cigarette butts10.3390/ma13122843 ↗
22. National environmental management: Waste act, 2008 (act no.59 of 2008) national norms and standards for the assessment of waste for landfill disposal. Retrieved April 25, 2024, from https://sawic.environment.gov.za/documents/2177.pdf.
23. Preparation of novel pitches by tar air-blowing10.1016/S0008-6223(98)00191-2 ↗
24. Characterization approach to develop distillation process for production of anode-grade coal tar pitch10.1088/1755-1315/882/1/012035 ↗
25. Yang · 2020 · vol. 6
26. Carbon binders from polymeric resins and pitch. II: structure and properties of the carbons
27. Silicon oxycarbide glasses and glass-ceramics: “All-Rounder” materials for advanced structural and functional applications10.1111/jace.15932 ↗
28. Flame resistant silicone-containing coating materials10.3390/coatings10050479 ↗