journal article·2023-11Open access

Gas bubble formation of filaments from sedimented graphene oxide

Zhixiong Song, Eric Shen Lin, Hassan Ali Abid, Jian Wern Ong, Tuck Wah Ng

Abstract

Gas bubbles that were generated in freshly prepared graphene oxide (GO) solution were found to float up as oblate shapes and travelled in the same way as they would when created in water. Gas bubbles, that were produced from the sediment of GO solution that was stood for 120 h, however, floated upward with a fine filament present in their wake while still retaining the oblate form. With bubbles that were 5 and 10 μL in volume, their average vertical speeds of 0.4 m/s could be maintained via significantly lower lateral displacements compared with similar sized gas bubbles created in water, notwithstanding that the shape aspect ratio fluctuations remained throughout. This behavior could be accounted for by a proposed mechanistic model in which the superhydrophilic and conversely superaerophobic GO particles (with contact angles of 4° ± 0.8°), that began encapsulating the liquid-gas interface as soon as the bubble was formed at the tip, prevented a typical pinch-off from occurring. This produced a thin filament with elastic properties brought along by the upward floating bubble. Rising gas bubbles, released from sedimented GO that was mixed with iron powder were found to create, under the influence of a magnet, fine structures that attached to the side of a container. These structures have the potential to be applied for environmental remediation. • Gas bubbles float up in freshly prepared graphene oxide (GO) solution as in water. • Gas bubbles float up with a fine filament present in their wake in sedimented GO. • Gas bubbles of 5 and 10 μL have much lower lateral displacements than in water. • Filament created has elastic properties and affected gas bubble travel behaviour. • When mixed with iron powder, a magnet created fine structures from the filament.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Pickering emulsions and particle stabilization · Micro and Nano Robotics · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. From chemical gardens to chemobrionics10.1021/acs.chemrev.5b00014 ↗
2. Dynamic diffusion and precipitation processes across calcium silicate membranes10.1016/j.jcis.2022.03.042 ↗
3. Spiral precipitation patterns in confined chemical gardens10.1073/pnas.1409552111 ↗
4. Oscillatory growth of silica tubes in chemical gardens10.1021/ja0298343 ↗
5. Self-Propelled chemical garden tubes10.1021/acs.jpcb.1c09088 ↗
6. A review of froth flotation control10.1016/j.minpro.2011.05.002 ↗
7. Collapse mechanisms and extreme deformation of particle-laden interfaces10.1016/j.cocis.2019.02.007 ↗
8. The role of microparticles on the shape and surface tension of static bubbles10.1016/j.jcis.2020.11.094 ↗
9. Drag coefficients of single bubbles under normal and micro gravity conditions10.1299/jsmeb.41.472 ↗
10. Drag coefficient fluctuation prediction of a single bubble rising in water10.1016/j.cej.2017.01.137 ↗
11. Characteristics of energy production and dissipation around a bubble rising in water10.1016/j.ces.2018.08.059 ↗
12. Jacques Magnaudet, Path instability of a rising bubble
13. The behavior of rising bubbles covered by particles10.1016/j.cej.2019.02.005 ↗
14. Electrical, luminescence, and microwave-assisted reduction behaviour of alkali vs. alkaline earth metal ion-modified graphene oxide membranes10.1016/j.matchemphys.2022.127067 ↗
15. A dynamic graphene oxide network enables spray printing of colloidal gels for high-performance micro-supercapacitors10.1002/adma.201804434 ↗
16. High corrosion resistance of reduced graphene oxide coated 316L stainless steel bipolar plate for proton exchange membrane fuel cell prepared by a facile method10.1016/j.matchemphys.2022.126663 ↗
17. Size-dependent aggregation of graphene oxide10.1016/j.carbon.2020.01.022 ↗
18. Size fractionation of graphene oxide sheets by pH-assisted selective sedimentation10.1021/ja200218y ↗
19. A sedimentation study of graphene oxide in aqueous solution using gradient differential centrifugation10.1039/C6CP00167J ↗
20. Aggregation and stability of reduced graphene oxide: complex roles of divalent cations, pH, and natural organic matter10.1021/acs.est.5b01866 ↗
21. Effects of temperature on aggregation kinetics of graphene oxide in aqueous solutions Colloids10.1016/j.colsurfa.2017.10.061 ↗
22. Graphene oxide sheets at interfaces10.1021/ja102777p ↗
23. Blown bubble assembly of graphene oxide patches for transparent electrodes in carbon−silicon solar cells10.1021/acsami.5b08646 ↗
24. Near-perfect microlenses based on graphene microbubbles10.1117/1.AP.2.5.055001 ↗
25. Wetting of graphene oxide: a molecular dynamics study10.1021/la500513x ↗
26. Sustained graphene oxide coated superhydrophilicity and superwetting using humidity control Colloids10.1016/j.colsurfa.2020.126097 ↗
27. Syringe infusion pump with absolute piston displacement control10.1063/1.5099271 ↗
28. Bubble motion and reaction in different viscous liquids10.1007/s42757-020-0072-4 ↗
29. Experiments on bubble pinch-off10.1063/1.2710269 ↗
30. Numerical simulation of bubble rising in viscous liquid10.1016/j.jcp.2006.08.008 ↗
31. The pinch-off dynamics of bubbles coated by microparticles10.1016/j.jcis.2020.05.021 ↗
32. The breakup dynamics of bubbles stabilized by nanoparticles in a microfluidic Y-junction
33. Controllable manipulation of bubbles in water by using underwater superaerophobic graphene-oxide/gold-nanoparticle composite surfaces10.1039/C7NR07349F ↗
34. Buckling of particle-laden interfaces10.1016/j.jcis.2015.02.012 ↗
35. Lifetime of surface bubbles in surfactant solutions10.1021/acs.langmuir.9b03597 ↗
36. Arsenic and fluoride contaminated groundwaters: a review of current technologies for contaminants removal10.1016/j.jenvman.2015.07.020 ↗
37. Aquatic arsenic: toxicity, speciation, transformations, and remediation10.1016/j.envint.2009.01.005 ↗
38. Iron powders as a potential material for arsenic removal in aqueous systems10.2355/isijinternational.ISIJINT-2021-258 ↗
39. Sustainable environmental remediation via biomimetic multifunctional lignocellulosic nano-framework10.1038/s41467-022-31881-5 ↗