journal article·2020-11

The effect of annealing and frequency of the external magnetic field on magnetic properties of nanostructured electrodeposit of the Ni86,0Fe9,8W1,3Cu2,9 alloy

Milica Spasojevic, Milan Plazinic, Milentije Lukovic, Aleksa Maricic, Miroslav Spasojevic

Publisher page

Abstract

Abstract A nanostructured powder of the Ni86,0Fe9,8W1,3Cu2,9 alloy is deposited on a titanium cathode by electrodeposition from the citrate bath, at the current density of 400 mA cm−2. The powder particles are of a cauliflower and dendritic shape and composed of nanocrystals of the FCC phase of the solid solution of iron, tungsten and copper in nickel, captive in an amorphous matrix. The freshly deposited powder is thermally stable up to 160 °C. The annealing of the powder in the temperature range from 160 °C to 460 °C results in its structure relaxation. At temperatures higher than 460 °C, the amorphous phase in the powder is crystalizing and crystal grains of the FCC solid solution are growing. The structural changes caused by annealing, affect magnetic properties of the alloy. The cooled powders after the structure relaxation have higher magnetic permeability, a lower loss of the active power and a lower coercive field. Crystallization of the amorphous phase and crystalline grain growth of the FCC phase causes a decrease in magnetic permeability, an increase in the power loss and the power of coercive field.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electrodeposition and Electroless Coatings · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Effect of magnetic field on permeability of electroplated permalloy for microdevices10.1143/JJAP.49.04DB17 ↗
2. Tuning the permeability of permalloy films for on-chip inductor applications10.1063/1.3502478 ↗
3. Electrodeposited anisotropic NiFe 45/55 thin films for high-frequency micro-inductor applications10.1016/j.jmmm.2009.01.038 ↗
4. Broadband microwave absorption in [NiFe/FeMn]n exchange-coupled multilayer films10.1016/j.tsf.2010.11.030 ↗
5. Electrodeposition of low-stress NiFe thin films from a highly acidic electrolyte10.1016/j.surfcoat.2010.07.076 ↗
6. Electrodeposition and properties of Ni-W, Fe-W and Fe-Ni-W amorphous alloys. A comparative study10.1016/S0013-4686(00)00437-0 ↗
7. Soon H (department of materials science and engineering, K.A.E.R.I. Ryu, Ho J (DUPIC, combination of mechanical alloying and two-stage sintering of a10.1016/S0921-5093(02)00410-0 ↗
8. Formation of crystalline and amorphous solid solutions of W-Ni-Fe powder during mechanical alloying10.1016/j.jallcom.2003.09.012 ↗
9. Phase transformation and thermal stability of mechanically alloyed W-Ni-Fe composite materials10.1016/j.msea.2004.02.039 ↗
10. Electrodeposition, microstructure and magnetic properties of nickel-cobalt-copper alloy powders10.1149/2.0441811jes ↗
11. Effect of microstructural changes during annealing on thermoelectromotive force and resistivity of electrodeposited Ni85.8Fe10.6W1.4Cu2.2 alloy10.1155/2017/8230615 ↗
12. Microstructure and magnetic properties of electrodeposited Ni85.8Fe10.6W1.4Cu2.2 alloy powder10.1149/2.1131614jes ↗
13. Structure and properties of electrodeposited Fe-Ni-W alloys with different levels of tungsten content: a comparative study10.1016/j.apsusc.2007.03.068 ↗
14. Effect of deposition current density and annealing temperature on the microstructure, hardness and magnetic properties of nanostructured nickel-iron-tungsten alloys10.1149/2.0041410jes ↗
15. Mechanical and structural characteristics of electrodeposited Ni-Fe-W alloy after heat-treatment10.1149/1.3292282 ↗
16. Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits: Part II: effect of microstructure on hardness, electrical and magnetic properties10.2298/SOS1601001C ↗
17. Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits part I: effect of synthesis parameters on chemical Composition, Microstructure and Morphology10.2298/SOS1503347C ↗
18. Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni-Fe-W alloys10.1179/174328406X79243 ↗
19. Structural and magnetic properties of electrodeposited Ni-Fe-W thin films
20. Microstructural properties of electrochemically prepared Ni-Fe-W powders10.1016/j.matchemphys.2012.04.061 ↗
21. The phase structure and morphology of electrodeposited nickel-cobalt alloy powders10.2298/SOS1103313S ↗
22. The effect of cathodic current density on the microstructure of electrochemically produced nanostructured powders of NixMo1-x alloys10.1016/j.matchemphys.2008.12.022 ↗
23. Formation of nanofibers in thin layers of amorphous W alloys with Ni, Co, and Fe obtained by electrodeposition10.1149/1.1536994 ↗
24. Electrochemical behavior of Ni xW 1-x materials as catalyst for hydrogen evolution reaction in alkaline media10.1016/j.jallcom.2011.12.086 ↗
25. Corrosion behaviour of electrodeposited nanocrystalline Ni-W and Ni-Fe-W alloys
26. The effect of structural changes during sintering on the electric and magnetic traits of the Ni96.7Mo3.3alloy nanostructured powder10.2298/SOS0902175R ↗
27. The effect of temperature on structural changes of Ni55Co 45 amorphous powder10.2298/SOS0402105S ↗
28. Effect of deposition current density and annealing temperature on the microstructure and magnetic properties of nanostructured ni-fe-w-cu alloys10.2298/SOS1902209S ↗
29. High-strength nanocrystalline Ni-W alloys produced by electrodeposition and their embrittlement behaviors during grain growth10.1016/S1359-6462(01)00720-5 ↗
30. Kinetics and mechanisms of the anodic dissolution of metallic glasses10.1149/1.2096615 ↗
31. Bulk and surface composition, amorphous structure, and thermocrystallization of electrodeposited alloys of tungsten with iron, nickel, and cobalt10.1007/s100080050133 ↗
32. Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders10.2298/SOS2001109S ↗
33. Influence of mechanical activation and heat treatment on magnetic properties of nano structured mixture Ni 85.8 Fe 10.6 Cu 2.2 W 1.410.2298/JMMB180809004V ↗
34. Nanocrystallization of amorphous Fe-Si-B alloys using high current density electropulsing10.1016/S0921-5093(00)00781-4 ↗
35. In-situ synthesis of nanocrystalline soft magnetic Fe-Ni-Si-B alloy10.1016/j.jallcom.2019.03.226 ↗
36. Nanocrystallization of metallic glasses10.1016/S0022-3093(01)00627-5 ↗
37. Fe-based amorphous alloys for wide ribbon production with high Bs and outstanding amorphous forming ability10.1016/j.jallcom.2015.01.056 ↗
38. Cullity · 2008
39. Significant improvement of soft magnetic properties for Fe(Co)BPSiC amorphous alloys by magnetic field annealing10.1016/j.jallcom.2018.01.311 ↗
40. New Fe-based soft magnetic amorphous alloys with high saturation magnetization and good corrosion resistance for dust core application10.1016/j.intermet.2016.05.011 ↗
41. Influence of temperature on the magnetic properties of nanostructured Fe-49 wt.% Co-2 wt.% V alloy powder synthesized by mechanically milling pre-alloyed gas-atomized powder10.1016/j.matchemphys.2019.01.044 ↗
42. Asynchronous responses of mechanical and magnetic properties to structure relaxation for FeNbB bulk metallic glass10.1007/s42243-018-0094-3 ↗
43. Magnetic and thermal stabilities of FeSiB eutectic amorphous alloys: compositional effects10.1016/j.jallcom.2018.10.331 ↗
44. Significant improvement of soft magnetic properties for Fe-based nanocrystalline alloys by inhibiting surface crystallization via a magnetic field assisted melt-spinning process10.1016/j.jmmm.2019.03.110 ↗
45. Co-optimizing magnetic properties and thermal stability of high Bs nanocrystalline alloys with critical formability10.1016/j.jmmm.2019.165310 ↗
46. Improvement of soft magnetic properties for distinctly high Fe content amorphous alloys via longitudinal magnetic field annealing10.1016/j.jmmm.2018.09.072 ↗
47. Magnetic softness and magnetization dynamics of FeSiBNbCu(P,Mo) nanocrystalline alloys with good high-frequency characterization10.1016/j.jmmm.2019.01.116 ↗
48. The effect of Co addition on magnetic and structural properties of nanocrystalline (Fe,Co)-Si-B-P-Cu alloys10.1016/j.jallcom.2018.07.013 ↗
49. Microstructure evolution and magnetic properties in Mn-rich Ni-(Co, Cu, Fe)-Mn-Sn Heusler base shape memory alloys10.1016/j.matchemphys.2019.121720 ↗
50. Si microalloying optimizes the thermal stability, crystallization behaviors and magnetic properties of Fe-rich Fe-B-Cu-Hf alloys10.1016/j.jmmm.2019.166339 ↗
51. Structural rearrangement at medium-range and its effects on the magnetic properties and crystallization behaviors of a Fe-based amorphous alloy10.1016/j.jallcom.2020.153911 ↗
52. Non-isothermal nanocrystallization of Fe83.3Si4B8P4Cu0.7 (NANOMET®) alloy: modeling and the heating rate effect on magnetic properties10.1088/1361-6463/ab795d ↗
53. Effect of chemical composition and Cu addition on crystallization and magnetic characteristics of FeZrB alloys10.1016/j.physleta.2020.126640 ↗
54. Optimization of the structure and soft magnetic properties of a Fe87B13 nanocrystalline alloy by additions of Cu and Nb10.1016/j.jmmm.2019.166001 ↗