journal article·2020-02Open access

An archaeometallurgical study of Mixtec silver gold alloy foils from Tomb No. 7, Monte Alban, Oaxaca, México

M. Ortega-Avilés, D. Tenorio-Castilleros, I.L. Segura-Venzor, José G. Miranda-Hernández, M.A. Velasco

Abstract

Abstract This work evaluates four groups of silver gold alloy foil samples from Tomb No. 7 from Monte Alban, Oaxaca. These were classified as received according to coloration as LG1, LG2, LG3, and LG4. These samples were called silver gold alloy foils because of their main elemental composition. These were analyzed (without alterations) via optical microscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). It was necessary to prepare them by focused ion beam (FIB) cross section to know their real microstructure and finally to test their indentation hardness (HIT) and indentation modulus (EIT) to measure mechanical properties. The experimental results revealed that silver gold alloys were cold-worked and annealed using a mixed technique of hammering with intermediate annealing for grain-size refinement. These were modified in their mechanical properties. The LG2 sample was the thinnest (27 μm) and hardest foil (HIT = 1781.7 MPa). It has the highest Au content (56.9 wt%) and the lowest Cu content (1.5 wt%) unlike LG4, which was the softest foil (HIT = 325.1 MPa). This sample showed non-recrystallized grains: This was the major superficial damage and led to a deficient work metal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Technological and material features of the gold work of Mesoamerica
2. Caso · 1969
3. Non-destructive in situ analysis of gold and silver artifacts from Tomb 7 Monte Albán, Oaxaca, México
4. Carmona Macías · 1997
5. A microstructural study of gold treasure from Monte Alban's Tomb 7
6. Toscano · 1994
7. de Grinberg · 1991
8. Franco · 1994
9. Differential PIXE analysis of mesoamerican jewelry items10.1016/0168-583X(96)00248-0 ↗
10. Location of gold placers in Oaxaca
11. Crisol de Técnicas, Metalurgia del México Antigüo
12. Hosler · 1994
13. Depletion gilding: an ancient method for surface enrichment of gold alloys
14. Scott · 1991
15. Verhoeven · 1987
16. New perspectives on Moche metallurgy: techniques of gilding copper at loma Negra, Northern perú10.2307/280051 ↗
17. Estudio Descriptivo, Metalográfico y Químico de las Puntas de Aleación Cobre de la Tumba de un Señor de la élite Sicán, Lambayeque – perú, empleando técnicas de microscopía óptica y análisis por activación neutrónica
18. Nanoindentation of gold and gold alloys by molecular dynamics simulation10.1016/j.msea.2015.10.081 ↗
19. Nanoindentation of single-crystalline gold thin films: correlating hardness and the onset of plasticity10.1016/j.actamat.2008.04.032 ↗
20. Voort · 2004
21. Giannuzzi · 200510.1007/b101190 ↗
22. Determination of mechanical properties by nanoindentation independently of indentation depth measurement10.1557/jmr.2012.261 ↗
23. Fischer-Cripps · 201110.1007/978-1-4419-9872-9 ↗
24. Alloy Phase Diagrams · 2005 · vol 3
25. Prince · 1990 · vol 294
26. Pearson · 1967
27. Thermodynamic evaluation of the ternary Ag-Au-Cu system – including a short range order description10.1016/S1359-6454(02)00382-8 ↗
28. Weinberg · 1970 · vol 1
29. Brick · 1965
30. Lajtin · 1973
31. Brooks · 1982
32. Wilson · 2000
33. Metallurgy of micro alloyed 24 carat golds10.1007/BF03214789 ↗