journal article·2023-06Open access

A comprehensive experimental study and numerical analysis of coefficient of friction of nanocomposite coatings

Mian Hammad Nazir, Zulfiqar Ahmad Khan, Muhammad Majid Hussain, Abdullah Rahil, Syed Zohaib Javaid Zaidi

Abstract

A comprehensive study of nanocomposite coating friction behaviour in oscillating-reciprocating simulations with steel balls is presented. Graphene/Nickel (Ni/GPL) and pure Nickel (Ni) coatings have been studied. SEM, EDS, and AFM analyses of coatings pre-test were performed to characterise the coatings in addition to tests to compare the coefficients of friction ‘COF’ between pure Ni and Ni/GPL. Based on microscopic characterisation of wear tracks, wear on counter carbon steel balls, and “U-shaped” wear depth profiles of wear tracks, it was determined that Ni had a higher coefficient of friction than Ni/GPL. A novel 2-D predictive numerical model was developed to examine the wear of nanocomposite coatings that integrates the microstructural and lubrication concepts. Predictions from newly developed model and the experimental results are in close agreement. While significant research has been conducted to understand the frictional performance of nanocomposite coatings, a novel and reliable predictive model is still needed for analyzing nanocomposite coatings COF in the context of design. The research will impact the automotive, aerospace, renewable energy, high-end manufacturing, and renewable energy sectors.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Nanocomposites: synthesis, structure, properties and new application opportunities10.1590/S1516-14392009000100002 ↗
2. Jost · 1976 · 117
3. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
4. Mechanical behavior of nanocrystalline metals and alloys10.1016/j.actamat.2003.08.032 ↗
5. Materials design of microstructure in grain boundary and second phase particles
6. Electrodeposition: a technology for the future10.1149/2.F08061IF ↗
7. Synthesis and characterization of nanocrystalline Ni/ZrO2 composite coatings10.1016/S0965-9773(99)00112-9 ↗
8. Electrodeposition of composite coatings containing nanoparticles in a metal deposit10.1016/j.surfcoat.2005.11.123 ↗
9. High strength nanocrystalline cobalt with high tensile ductility10.1016/S1359-6462(03)00397-X ↗
10. Tribological study of Ni matrix composite coatings containing nano and micro SiC particles10.1016/j.electacta.2004.10.090 ↗
11. Characteristics of electro-co-deposited Ni–Al2O3 nano-particle reinforced metal matrix composite (MMC) coatings10.1016/j.wear.2008.12.022 ↗
12. Water-lubricated Ni-based composite (Ni–Al 2 O 3, Ni–SiC and Ni–ZrO 2) thin film coatings for industrial applications10.1007/s40195-015-0354-1 ↗
13. Effect of bath ionic strength on adhesion and tribological properties of pure nickel and Ni-based nanocomposite coatings10.1080/01694243.2015.1117276 ↗
14. Analysis of pad size effects in fretting fatigue using short crack arrest methodologies10.1016/S0142-1123(99)00077-8 ↗
15. Lubrication of sliding point contacts of AISI 52100 steel—the influence of curvature10.1016/0043-1648(76)90138-1 ↗
16. Friction and wear of pivot jewel bearing in oil-bath lubrication for high rotational speed application10.1016/j.wear.2013.01.032 ↗
17. Finite element simulation and experimental validation of fretting wear10.1016/j.wear.2003.07.001 ↗
18. Lubrication and wear modelling of artificial hip joints: a review10.1016/j.triboint.2010.06.010 ↗
19. Modelling mixed lubrication for deep drawing processes10.1016/j.wear.2012.06.006 ↗
20. Modeling the effectiveness of oil lubrication in reducing both friction and wear in a fretting contact10.1016/j.wear.2019.02.029 ↗
21. Experimental analysis and modelling for reciprocating wear behaviour of nanocomposite coatings10.1016/j.wear.2018.09.011 ↗
22. Modeling the effect of residual and diffusion-induced stresses on corrosion at the interface of coating and substrate10.5006/1804 ↗
23. A predictive model for life assessment of automotive exhaust mufflers subject to internal corrosion failure due to exhaust gas condensation10.1016/j.engfailanal.2016.02.014 ↗
24. A holistic mathematical modelling and simulation for cathodic delamination mechanism – a novel and an efficient approach
25. Modelling of metal-coating delamination incorporating variable environmental parameters10.1080/01694243.2014.990200 ↗
26. Nazir · 2015
27. Optimisation of interface roughness and coating thickness to maximise coating-substrate adhesion - a failure prediction and reliability assessment modelling10.1080/01694243.2015.1026870 ↗
28. Time dependent surface corrosion analysis and modelling of automotive steel under a simplistic model of variations in environmental parameters10.1016/j.matchemphys.2016.04.068 ↗
29. A unified mathematical modelling and simulation for cathodic blistering mechanism incorporating diffusion and fracture mechanics concepts10.1080/01694243.2015.1022496 ↗
30. Analysing the coupled effects of compressive and diffusion induced stresses on the nucleation and propagation of circular coating blisters in the presence of micro-cracks10.1016/j.engfailanal.2016.07.003 ↗
31. A comprehensive predictive corrosion model incorporating varying environmental gas pollutants applied to wider steel applications10.1016/j.matchemphys.2017.01.081 ↗
32. Nazir · 2016
33. Wear and friction properties of electrodeposited Ni-based coatings subject to nano-enhanced lubricant and composite coating10.1007/s40195-016-0470-6 ↗
34. Maximising the interfacial toughness of thin coatings and substrate through optimisation of defined parameters
35. Water-lubricated Ni-based composite (Ni–Al2O3, Ni–SiC and Ni–ZrO2) thin film coatings for industrial applications10.1007/s40195-015-0354-1 ↗
36. Analyzing and modelling the corrosion behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene nanocomposite coatings10.3390/ma10111225 ↗
37. Improvement in wear and corrosion resistance of AISI 1020 steel by high velocity oxy-fuel spray coating containing Ni-Cr-B-Si-Fe-C10.1515/htmp-2012-0009 ↗
38. How grain size controls friction and wear in nanocrystalline metals10.1103/PhysRevB.92.075418 ↗
39. Friction and wear of a piston ring/cylinder liner at the top dead centre: experimental study and modelling10.1016/j.triboint.2016.10.005 ↗
40. Comparison of rolling contact fatigue life between elastohydrodynamic lubricated point contacts pre and post running-in treatment10.1016/j.triboint.2019.106089 ↗
41. The role of a tribofilm and wear debris in the tribological behaviour of nanocrystalline Ni–Co electrodeposits10.1016/j.wear.2013.01.121 ↗
42. The synergetic effects of surface texturing and MoDDP additive applied to ball-on-disk friction subject to both flooded and starved lubrication conditions10.1007/s11249-017-0949-y ↗
43. On the nature of running-in10.1016/j.triboint.2005.07.020 ↗
44. Few layer graphene to reduce wear and friction on sliding steel surfaces10.1016/j.carbon.2012.11.061 ↗
45. Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen10.1016/j.carbon.2013.03.006 ↗
46. "3 - fundamentals of contact mechanics and friction
47. A review on wall slip in high solid dispersions10.1007/s00397-017-1002-7 ↗
48. Electrochemical deposition of nickel graphene composite coatings: effect of deposition temperature on its surface morphology and corrosion resistance10.1039/C6RA28755G ↗
49. Mechanical properties of nickel-graphene composites synthesized by electrochemical deposition10.1088/0957-4484/26/6/065706 ↗
50. Harvey · 1982
51. A study on friction and wear behaviour of carburized, carbonitrided and borided AISI 1020 and 5115 steels10.1016/S0924-0136(02)01038-5 ↗
52. Wear mechanisms in oil-lubricated and dry fretting of silicon nitride against bearing steel contacts10.1016/S0043-1648(97)00082-3 ↗
53. Grain size and surface roughness effect on the instability strains in sheet metal stretching10.1016/j.jmatprotec.2005.04.116 ↗
54. The transition between fully flooded and starved regimes in EHL10.1016/j.triboint.2004.05.005 ↗
55. A global–local wear approach to quantify the contact endurance under reciprocating-fretting sliding conditions10.1016/j.wear.2007.01.072 ↗
56. Synergistic wear-corrosion analysis and modelling of nanocomposite coatings10.1016/j.triboint.2018.01.027 ↗
57. A global–local wear approach to quantify the contact endurance under reciprocating-fretting sliding conditions10.1016/j.wear.2007.01.072 ↗
58. A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume10.1016/j.ijfatigue.2004.09.001 ↗
59. Validity of cubic law for fluid flow in a deformable rock fracture10.1029/WR016i006p01016 ↗
60. Analysis of stress sensitivity and its influence on oil production from tight reservoirs
61. Mass transport in laser surface nitriding involving the effect of high temperature gradient: simulation and experiment10.1016/j.commatsci.2010.04.031 ↗
62. Flow in porous media I: a theoretical derivation of Darcy's law10.1007/BF01036523 ↗
63. Modeling of elastic deformation of multilayers due to residual stresses and external bending10.1063/1.1478137 ↗
64. http://lammps.sandia.gov ".
65. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
66. Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys10.1103/PhysRevB.33.7983 ↗
67. Development of new interatomic potentials appropriate for crystalline and liquid iron10.1080/14786430310001613264 ↗
68. Atomistic investigation on the structure–property relationship during thermal spray nanoparticle impact10.1016/j.commatsci.2013.12.011 ↗
69. Optimisation of interface roughness and coating thickness to maximise coating–substrate adhesion–a failure prediction and reliability assessment modelling10.1080/01694243.2015.1026870 ↗
70. Lide · 1947 · 12J204
71. Modeling the effect of residual and diffusion-induced stresses on corrosion at the interface of coating and substrate10.5006/1804 ↗
72. Atomistic simulation of dislocations, surfaces and interfaces in MgO10.1039/ft9969200433 ↗
73. Dislocation models of crystal grain boundaries10.1103/PhysRev.78.275 ↗