journal article·2021-11

Morphology transformation of barium titanate nanostructures in molten salt medium

Jiahui Zhou, Zhiwu Chen, Zhenya Lu, Xinhua He, Xiaoyi Fu

Publisher page

Abstract

Abstract Barium titanate (BaTiO3) nanoparticles undergo a morphological transformation in a NaCl molten salt environment, beginning with nanoparticles then changing to nanowires and then microsheets, while the composition is transformed from pure BaTiO3 into a mixture of Ba2Ti6O13, Na2Ti6O13 and BaTiO3. A systematic study on the effects of calcination temperature, treatment time and the mass ratio of BT (BaTiO3)/NaCl on BaTiO3 nanoparticles morphology is reported. Here, nanowires are generated in the range of 900–1100 °C, while at 1200 °C, not only nanowires but also microsheets appear in the product. Under conditions of 1:100 BT/NaCl weight ratio, 1100 °C calcination temperature, and 3 h reaction time, the resulting nanowires have a smooth surface, with a diameter of 324.6 ± 209.2 nm and a length of 20–150 μm. It is speculated that the mechanism of nanowires formation is a dissolution-precipitation process and that the formation of the microsheets is due to the result of liquid phase sintering of BaTiO3 nanoparticles at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. BaTiO3 nanowires-induced phase transition and thermally stable strain in (Bi0.5Na0.5)TiO3 piezoelectric ceramics10.1016/j.ceramint.2019.06.086 ↗
2. Dielectric and ferroelectric properties of BaTiO3 Nanofibers prepared via Electrospinning10.1016/j.jmst.2014.03.021 ↗
3. Perspectives and challenges in multilayer ceramic capacitors for next generation electronics10.1039/C9TC02921D ↗
5. Significantly enhanced piezo-photocatalytic capability in BaTiO3 nanowires for degrading organic dye10.1016/j.jmat.2020.03.004 ↗
6. Template-free hydrothermal synthesis of single- srystalline barium titanate and strontium titanate nanowires10.1002/smll.200500055 ↗
7. Low-temperature synthesis of phase-pure 0D–1D BaTiO3 nanostructures using H2Ti3O7 templates10.1002/ejic.200901230 ↗
8. Enhanced pyroelectric catalysis of BaTiO3 nanowires for utilizing waste heat in pollution treatment10.1021/acsami.8b11158 ↗
9. Growth and self-assembly of BaTiO3 nanocubes for resistive switching memory cells10.1016/j.jssc.2013.10.049 ↗
10. Structural and chemical characterization of BaTiO3 nanorods10.1016/j.materresbull.2010.12.012 ↗
11. Template-directed synthesis of oxide nanotubes: fabrication, characterization, and applications10.1021/cm702138c ↗
12. Large-scale synthesis of single- crystalline perovskite nanostructures10.1021/ja038192w ↗
13. Molten salt synthesis of BaTiO3 nanorods: dielectric, optical properties and structural characterizations10.1111/jace.16123 ↗
14. Molten salt route of single crystal barium titanate nanowires10.1080/17458080.2014.980445 ↗
15. Template-free fabrication of pure single-crystalline BaTiO3 nano-wires by molten salt synthesis technique10.1016/j.ceramint.2013.05.105 ↗
16. Tetragonal BaTiO3 nanowires: a template-free salt-flux-assisted synthesis and its piezoelectric response based on mechanical energy harvesting10.1039/C9TC01622H ↗
17. General surfactant-free synthesis of MTiO3 (M = Ba, Sr, Pb) perovskite nanostrips10.1039/b815698k ↗
18. Preparation of⟨111⟩-textured BaTiO3 ceramics by templated grain growth method using novel template particles10.1016/j.ceramint.2007.09.021 ↗
19. Morphology-controlled synthesis of barium titanate nanostructures10.1021/ic900854x ↗
20. Recent progress in molten salt synthesis of low-dimensional perovskite oxide nanostructures, structural characterization, properties, and functional applications: a review10.1016/j.jmst.2017.10.005 ↗
21. Synthesis of single-crystalline perovskite nanorods composed of barium titanate and strontium titanate10.1021/ja017694b ↗
22. A facile one step conversion of the sub-micrometer to uniform nanopowder in tetragonal BaTiO3 via a surface active etching salt10.1016/j.matdes.2016.07.137 ↗
23. Digestive ripening, nanophase segregation and superlattice formation in gold nanocrystal colloids10.1023/A:1010078521951 ↗
24. Flux synthesis of Ba2Li2/3Ti6/3O13 and its photocatalytic performance
25. Na2Ti6O13 nanorods with dominant large interlayer spacing Exposed facet for high-performance Na-ion batteries10.1002/smll.201600845 ↗
26. Synthesis and electromagnetic characteristics of the flake-shaped barium titanate powder10.1016/j.jallcom.2008.08.038 ↗