Pressure assisted bonding process of stainless steel on titanium alloy using powder metallurgy
Source abstract
Abstract
Abstract Titanium alloys have been widely used in many industrial applications. Nevertheless, efforts to improve their properties are continually increasing. One of the most effective routes to improve strength, hardness and wear resistance is to create a coating layer on the substrates. In the current study, stainless steel was selected for the in-situ joining and creating a continuous layer on the Ti6Al4V alloy. The joining process was carried out at two different temperatures, 950 °C and 1050 °C, and the mechanical properties of the bonded materials were investigated employing hardness, bending strength and wear tests, while the bonding interface layer between the alloy powders was characterized by optical and scanning electron microscopes. The results showed that the higher the joining temperature, the wider the interfacial zone between the coating layer and substrate. The hardness and wear properties of the joint materials increased at 1050 °C, while the bending stress was reduced and debonding was observed after the bending test. The chemical composition at the interface zone was identified by energy dispersive X-ray analysis, and the results showed high diffusion rates between the elements. As a result, the process used in the current study can be used for many titanium alloys, and their use in industrial applications can be increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Microstructure and mechanical behavior of a titanium to stainless steel dissimilar joint brazed with Ag-Cu alloy filler and an Ag interlayer10.1016/j.matchar.2017.04.032 ↗
2. Microstructure and mechanical property of laser butt welding of titanium alloy to stainless steel10.1016/j.matdes.2013.07.044 ↗
3. Titanium to steel joining by spark plasma sintering (SPS) technology10.1016/j.jmatprotec.2012.09.017 ↗
4. A hybrid joint based on two kinds of bonding mechanisms for titanium alloy and stainless steel by pulsed laser welding10.1016/j.matlet.2016.08.138 ↗
5. Sensitization assessment of duplex stainless steel using critical pitting temperature CPT method - ASTM G48
6. Dissimilar laser welding of AISI 316L stainless steel to Ti6-Al4V alloy via pure vanadium interlayer10.1016/j.msea.2014.10.084 ↗
7. Interfacial microstructure and mechanical property of TC4 titanium alloy/316L stainless steel joint brazed with Ti-Zr-Cu-Ni-V amorphous filler metal10.1016/j.jmapro.2018.08.022 ↗
8. Impulse pressuring diffusion bonding of titanium to stainless steel using a copper interlayer10.1016/S1875-5372(15)30063-1 ↗
9. Effect of friction time on mechanical and metallurgical properties of continuous drive friction welded Ti6Al4V7SUS321 joints10.1016/j.matdes.2013.11.065 ↗
10. Joining of titanium to 304L stainless steel by friction welding10.1016/j.jmatprotec.2009.06.018 ↗
11. Enhancing tribological performance of Ti-6Al-4V by sliding process
12. Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process10.1016/j.jmrt.2016.03.007 ↗
13. Evaluation on dry sliding wear behavior of (TiB+TiC)/Ti-6Al-4V matrix composite10.1007/s12541-017-0133-1 ↗
14. Analysis of sintering and bonding of ultrafine WC powder and stainless steel by hot compaction diffusion bonding10.1016/j.fusengdes.2018.05.076 ↗
15. Pressureless spark plasma sintering: a perspective from conventional sintering to accelerated sintering without pressure10.1007/s11106-019-00010-1 ↗
16. Study of the properties of low-cost powder metallurgy titanium alloys by 430 stainless steel addition10.1016/j.matdes.2014.04.019 ↗
17. Production and characterization of Al-xNi in situ composites using hot pressing10.2298/JMMB130717001Y ↗
18. Tribology of engineered surfaces
19. Effect of trace impurities on the creep behavior of a near a titanium alloy10.1016/j.scriptamat.2008.05.009 ↗
20. Diffusion of titanium in iron10.1007/BF00703075 ↗
21. Microstructural evaluation during sintering of blended elemental Ti-5Al-2.5Fe alloy10.1016/j.jallcom.2008.09.004 ↗
22. Fasasi · Mater. Sci. Eng. C · 2009 · 29 · 510.1016/j.msec.2008.05.002 ↗
23. A review on diffusion bonding between titanium alloys and stainless steels
24. The investigate metallurgical properties of roll bonding titanium clad steel10.7763/IJAPM.2011.V1.34 ↗
25. Microstructure and mechanical properties of diffusion bonded joints between Ti-6Al-4V titanium alloy and AISI316L stainless steel using Cu/Nb multi-interlayer10.1016/j.vacuum.2017.08.017 ↗
26. Microstructure and mechanical properties of brazed titanium7steel joints10.1007/s10853-007-1935-9 ↗
27. Y. Zhang, E. Feng, W. Mo, Y. Lv, R. Ma, S. Ye, X. Wang, P. Yu, On the microstructures and fatigue behaviors of 316L stainless steel metal injection molded with gas-and-water atomized powders, Metals, 8(893) 2018 1-201813..10.3390/met8110893 ↗
28. Investigating the effect of sintering temperature on structural and tribological properties of a nanostructured Ti–20Nb–13Zr alloy for biomedical applications10.1007/978-3-030-36628-5_61 ↗