Microwave transmission performance of mullite refractory ceramics over wide temperature range at 915 MHz and 2450 MHz
Source abstract
Abstract
Abstract Refractory materials are extensively applied in microwave heating instruments. Knowledge of the microwave transmission performance of refractory materials is key to improving the heating efficiency of microwave instruments. In this study, the microwave transmission performance of mullite refractory ceramics was systematically investigated with respect to various key factors, including temperature, microwave frequency, material thickness, incident angle, and polarization modes. The results indicated that the microwave transmission performance of mullite ceramics at 915 MHz is generally superior to that at 2450 MHz. As the temperature increases, the microwave transmission performance at both frequencies degrades, and the corresponding high transmissivity (power transmission coefficient > 0.7) zone also decreases. The microwave transmission performance between both polarization modes is significantly different, which is optimal at 0° (vertical incidence) and Brewster's angle, respectively. Moreover, the preferred thickness of mullite ceramics at different frequencies and temperatures was determined. This research provides references for the selection of incident angles and the optimization of material thickness during microwave heating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Microwave Engineering and Waveguides · Gyrotron and Vacuum Electronics Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Investigation on the mechanism of micro-cracks generated by microwave heating in coal and rock10.1016/j.energy.2020.118211 ↗
2. Microwave mode of heating in the preparation of porous carbon materials for adsorption and energy storage applications-An overview
3. Microwave heating assistant preparation of high permselectivity polypiperazine-amide nanofiltration membrane during the interfacial polymerization process with low monomer concentration10.1016/j.memsci.2019.117718 ↗
4. Polar nano-clusters in nominally paraelectric ceramics demonstrating high microwave tunability for wireless communication10.1016/j.jeurceramsoc.2020.04.015 ↗
5. Microwave-assisted Diels-Alder reaction for rapid synthesis of luminescent nanodiamond with AIE-active dyes and their biomedical applications10.1016/j.matchemphys.2017.05.041 ↗
6. A novel ultralow-loss Sr2CeO4 microwave dielectric ceramic and its property modification10.1016/j.jeurceramsoc.2018.12.033 ↗
7. High entropy alloys obtained by field assisted powder metallurgy route: SPS and microwave heating10.1016/j.matchemphys.2017.06.065 ↗
8. Microwave-assisted food processing technologies for enhancing product quality and process efficiency: a review of recent developments10.1016/j.tifs.2017.05.014 ↗
9. Microwave-assisted metallurgy10.1179/1743280414Y.0000000042 ↗
10. New insights into the role of selective and volumetric heating during microwave extraction: Investigation of the extraction of polyphenolic compounds from sea buckthorn leaves using microwave-assisted extraction and conventional solvent extraction10.1016/j.cep.2017.03.006 ↗
11. Microwave transmission performance of fused silica ceramics in microwave high-temperature heating10.1016/j.ceramint.2018.12.092 ↗
12. The detail microstructure of an alumina-zirconia-silica (AZS) fused cast refractory material from the cast skin into bulk analyzed using EBSD10.1016/j.jeurceramsoc.2019.01.051 ↗
13. Combination of Brazilian test and digital image correlation for mechanical characterization of refractory materials10.1016/j.jeurceramsoc.2016.12.032 ↗
14. Structure and properties of mullite-A review10.1016/j.jeurceramsoc.2007.03.017 ↗
15. Fabrication and properties of mullite thermal insulation materials with in-situ synthesized mullite hollow whiskers
16. Phase composition of alumina-mullite-zirconia refractory materials10.1016/j.jeurceramsoc.2009.07.016 ↗
17. Synthesis and microwave absorption characteristics of corundum-mullite refractories10.1007/s11148-014-9695-y ↗
18. Mechanical, morphological and dielectric properties of sintered mullite ceramics at two different heating rates prepared from alkaline monophasic salts10.1016/j.ceramint.2012.07.105 ↗
19. Dynamic transmission performance of alumina and mullite refractory ceramics in microwave high-temperature heating10.1515/htmp-2014-0167 ↗
20. A microwave absorption/transmission integrated sandwich structure based on composite corrugation channel: design, fabrication and experiment10.1016/j.compstruct.2019.111425 ↗
21. Infrared emissivity and microwave transmission behavior of flaky aluminum functionalized pyramidal-frustum shaped periodic structure10.1016/j.infrared.2019.04.013 ↗
22. Electromagnetic waves transmission performance of alumina refractory ceramics in 2.45 GHz microwave heating10.1016/j.ceramint.2019.08.055 ↗
23. Evaluation of water content in honey using microwave transmission line technique10.1016/j.jfoodeng.2017.07.009 ↗
24. Dielectric and microwave-absorption properties of SiC nanoparticle/SiBCN composite ceramics10.1016/j.jeurceramsoc.2013.08.005 ↗
25. Microwave power absorption characteristics of ferrites10.1109/TMAG.2012.2227775 ↗
26. Komarov · 2012
27. Dielectric properties and electromagnetic wave transmission performance of polycrystalline mullite fiberboard at 2.45 GHz10.1016/j.ceramint.2019.11.232 ↗
28. Absorption characteristics of single-layer ceramics under oblique incident microwave irradiation10.1016/j.ceramint.2014.08.011 ↗
29. Structural changes of starch subjected to microwave heating: a review from the perspective of dielectric properties10.1016/j.tifs.2020.02.020 ↗
30. Microwave absorption characteristics of conventionally heated nonstoichiometric ferrous oxide10.1007/s11661-011-0652-9 ↗