Characterization of Yittria Stabilized Zirconia/Titania core-shell powders synthesized via air plasma spray method
Source abstract
Abstract
Abstract In this study, Yittria Stabilized Zirconia/Titania powders synthesized via air plasma spray (APS) method such as morphology changes and phase transformations of core-shell structure characterized. Phase analysis of powders was performed by XRD. The crystallite size and lattice strain of YSZ/TiO2 core-shell structure was calculated by Williamson-Hall method. Morphology was observed with scanning electron microscope. EDS and map analysis were used for core-shell characterization. Results revealed that all TiO2 nano particles were melted around YSZ powders with the thickness between 1 up to 5 μm. After spraying the YSZ/TiO2 mixture in water, strain values increased but crystallite size decreased. Moreover, the monoclinic phase transformed to tetragonal phase but cubic phase remained constant, approximately.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Synthesis and characterization of microporous zirconia powders: application in nanofilters and nanofiltration characteristics10.1016/S0376-7388(97)00051-3 ↗
2. Synthesis and characterisation of nanoscale magnesium oxide powders and their application in thick films of Bi2Sr2CaCu2O810.1016/S0167-577X(97)00148-1 ↗
3. The prospects of nanodispersive powders application in surface engineering technologies10.1016/j.surfcoat.2003.10.086 ↗
4. Yttria-stabilized-zirconia hollow spheres prepared by atmosphericplasma spray10.1016/j.partic.2013.06.003 ↗
5. Leyens · Z. Met. · 2001 · 92 · 762
6. N. P. Padture, M. Gell, P. G. Klemens, U.S. Patent No. 6,015,630 (2000).
7. Klemens · 1993 · vol. 23 · 209
8. Dorvaux · 1998 · 13
9. Schlichting · J. Mater. Sci. · 2001 · 36 · 300310.1023/A:1017970924312 ↗
10. The design of a LiFePO4/carbon nanocomposite with a core–shell structure and its synthesis by an in situ polymerization restriction method10.1002/anie.200802539 ↗
11. Sulfur/polythiophene with a core/shell structure: synthesis and electrochemical properties of the cathode for rechargeable lithium batteries10.1021/jp1114724 ↗
12. Core–shell structure of Polypyrrole grown on V2O5Nanoribbon as high performance anode material for supercapacitors10.1002/aenm.201200088 ↗
13. Synthesis, characterization and microwave absorption properties of titania-coated barium ferrite composites10.1016/j.jpcs.2006.06.013 ↗
14. F H Chen, et al., “The grafting and release behavior of doxorubincin from Fe3O4@SiO2 core–shell structure nanoparticles via an acid cleaving amide bond: the potential for magnetic targeting drug delivery”, Nanotechnology, Volume 19, Number 16.10.1088/0957-4484/19/16/165103 ↗
15. Magnetic and conducting Fe3O4–cross-linked polyaniline nanoparticles with core–shell structure10.1016/S0032-3861(02)00046-0 ↗
16. Hiroshi Kishi, et al., “The effect of MgO and rare-earth oxide on formation behavior of core-shell structure in BaTiO3”, Jpn. J. Appl. Phys., Volume 36, Part 1, Number 9B.10.1143/JJAP.36.5954 ↗
17. Synthesis and magnetic properties of Fe/SiO2 nanocomposites prepared by a sol–gel method combined with hydrogen reduction10.1016/j.jallcom.2005.03.126 ↗
18. Enhancement effect of illumination on the photoluminescence of water-soluble CdTe nanocrystals: toward highly fluorescent CdTe/CdS core-shell structure10.1021/cm049172b ↗
19. A.H. Pakseresht, et al., “Research Perspectives on Functional Micro- and Nanoscale Coatings”, chapter 15, concept of thermal barrier functional coatings in high temperature engineering components.
20. Facile fabrication and photocatalytic application of Ag nanoparticles-TiO2Nanofiber composites10.1166/jnn.2011.3805 ↗
21. Enhanced photocatalytic activity of nanostructured titanium dioxide/polyaniline hybrid photocatalysts10.1016/j.poly.2016.08.029 ↗
22. Reddy, Kakarla Raghava, et al., “Carbon functionalized TiO2 nanofibers for high efficiency photocatalysis”, Mater. Res. Express, Volume 1, Number 1.10.1088/2053-1591/1/1/015012 ↗
23. Hybrid nanostructures based on titanium dioxide for enhanced photocatalysis10.1016/j.apcata.2014.10.001 ↗
24. Ni-doped rutile TiO2 nanoflowers: low-temperature solution synthesis and enhanced photocatalytic efficiency10.1039/C6RA01752E ↗
25. Characterisation of carboxymethyl cellulose and polyacrylamide graft copolymer10.1016/j.carbpol.2004.04.020 ↗
26. Williamson · Acta Metall. · 1953 · 1 · 2210.1016/0001-6160(53)90006-6 ↗
27. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
28. Characterization of structural changes of mechanically activated natural pyrite using XRD line profile analysis10.1016/j.minpro.2014.11.005 ↗
29. Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by X-ray diffraction10.1111/j.1151-2916.1984.tb19715.x ↗
30. Li · J. Am. Ceram. Soc. · 1994 · 77 · 128110.1111/j.1151-2916.1994.tb05403.x ↗
31. Phase equilibria in the TiO2–YO1.5–ZrO2 system10.1016/j.jeurceramsoc.2008.03.011 ↗
32. Opportunities for improved TBC durability in the CeO2–TiO2–ZrO2 system10.1016/j.surfcoat.2013.01.026 ↗