journal article·2017-01

Fabrication and thermal characterization of amorphous and nanocrystalline Al9FeNi/Al3Ti compound

Majid Tavoosi

Publisher page

Abstract

Abstract In this study, the fabrication and structural characterization of amorphous/nanocrystalline Al9FeNi/Al3Ti phase has been performed. In this regards, milling and annealing processes were applied on Al80Fe10Ti5Ni5 (at. %) powder mixture for different periods of time. The prepared samples were characterized using X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM) and differential scanning calorimetery (DSC). According to the results, supersaturated solid solution, nanocrystalline Al9FeNi/Al3Ti (with average crystallite size of about 7 nm) and amorphous phases indicated three different microstructures which can be formed in Al80Fe10Ti5Ni5 system during milling process. The formed supersaturated solid solution and amorphous phases were unstable and transformed to Al9FeNi/Al3Ti intermetallic compound during annealing process. It is shown that, Al9FeNi phase in Al9FeNi/Al3Ti intermetallic compound can decompose into Al3Ni, Al13Fe4 and liquid phases during a reversible peritectic reaction at 809 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Inoue · 2001
2. Mechanical properties and microstructures of Al-Fe alloys processed by high-pressure torsion10.1007/s11661-012-1341-z ↗
3. Thermal stability of amorphous Al-Fe-Y prepared by mechanical alloying10.4028/www.scientific.net/MSF.804.271 ↗
4. Amorphous phase formation in Al80Fe10M10 (M= Ni, Ti, and V) ternary systems by mechanical alloying10.1007/s10853-011-5741-z ↗
5. Formation and crystallization of an amorphous Al80Fe10Ti5Ni3B2 alloy10.1007/s12540-011-1025-z ↗
6. Crystallization process of Al80Fe10Ti10 amorphous phase10.1179/003258910X12827272082461 ↗
7. Preparation of nanocrystalline Al3Ti/Al13(Fe,Ni)4 intermetallic compound by means of melt spinning and subsequent annealing10.1016/j.jallcom.2016.07.099 ↗
8. Nanocrystalline aluminum bulk alloys with a high strength of 1420 MPa produced by the consolidation of amorphous powders10.1016/S1359-6462(01)00781-3 ↗
9. Amorphisation process during mechanical alloying of Al-Fe-Ti powders and crystallization of the milling products
10. The anomalous diffusion processes of the γ′ Phase Ni3Al in Fe–Ni–Al alloy during low-temperature deformation10.1016/j.matlet.2015.11.078 ↗
11. Role of alloying elements in phase decomposition in Alnico magnet alloys10.1007/BF02816044 ↗
12. An X-Ray Study of the iron-nickel-aluminum ternary equilibrium diagram10.1098/rspa.1938.0098 ↗
13. An X-Ray investigation of the aluminum rich iron-nickel-aluminum alloys after slow cooling
14. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗