Focused ion beam milling of carbon fibres
Source abstract
Abstract
Abstract A focused ion beam has been used to mill both individual carbon fibres as well as fibres in an epoxy composite, with a view to preparing flat surfaces for nano-indentation. The milled surfaces have been assessed for damage using scanning probe microscopy nano-indentation and Raman micro-probe analysis, revealing that FIB milling damages the carbon fibre surface and covers surrounding areas with debris of disordered carbon. The debris is detected as far as 100 μm from the milling site. The energy of milling as well as the orientation of the beam was varied and shown to have an effect when assessed by Raman spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Integrated Circuits and Semiconductor Failure Analysis · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. The application of focused ion beam microscopy in the material sciences10.1016/j.matchar.2008.11.014 ↗
2. Applications of focused ion beam microscopy to materials science specimens10.1016/S0968-4328(99)00012-8 ↗
3. Thin dielectric film thickness determination by advanced transmission electron microscopy10.1017/S1431927603030629 ↗
4. A three beam approach to TEM preparation using in-situ low voltage argon ion final milling in a FIB-SEM instrument10.1017/S1431927605502460 ↗
5. TEM study of the damage formation during FIB milling of single crystal diamond
6. Effects of focused ion beam milling on the compressive behavior of directionally solidified micropillars and the nanoindentation response of an electropolished surface10.1016/j.actamat.2008.09.033 ↗
7. Preparation of carbon fibres for transmission electron microscopy10.1088/0022-3735/4/5/016 ↗
8. FIB damage of Cu and possible consequences for miniaturized mechanical tests10.1016/j.msea.2007.01.046 ↗
9. Surface damage formation during ion-beam thinning of samples for transmission electron microscopy10.1016/S0304-3991(00)00096-6 ↗
10. Damage layers in Si versus ion dose during 30 keV FIB milling10.1017/S1431927609098638 ↗
11. Damage in iii-v compounds during focused ion beam milling10.1017/S1431927605050294 ↗
12. Surface damage in silicon after 30 keV Ga FIB fabrication10.1017/S1431927603444425 ↗
13. The study of the FIB induced damage in diamond10.1017/S1431927611004375 ↗
14. TEM investigation of FIB induced damages in preparation of metal material TEM specimens by FIB10.1016/j.matlet.2005.08.018 ↗
15. Defect structure in micropillars using x-ray microdiffraction10.1063/1.2358204 ↗
16. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
17. The effects of dwell time on focused ion beam machining of silicon10.1016/j.mee.2014.02.025 ↗
18. Preparation of carbon fibre sections for light and transmission electron microscopy10.1007/BF00720179 ↗
19. Microstructure in a series of mesophase pitch-based fibers from Du Pont: zones, folds, and disclinations10.1016/0008-6223(93)90114-P ↗
20. A TEM study of microstructure of carbon fiber/polycarbosilane-derived SiC composites10.1016/S0008-6223(99)00098-6 ↗
21. Focused ion beam preparation techniques dedicated for the fabrication of TEM lamellae of fibre-reinforced composites10.1093/jmicro/dfh102 ↗
22. Imaging the interphase of carbon fiber composites using transmission electron microscopy: preparations by focused ion beam, ion beam etching, and ultramicrotomy10.1016/j.cja.2015.05.005 ↗
23. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
24. Perspectives on carbon nanotubes and graphene Raman spectroscopy10.1021/nl904286r ↗
25. Characterization of carbon-carbon composites—I: textural and microstructural properties10.1016/0008-6223(81)90097-X ↗
26. Raman spectroscopy of carbon nanotubes10.1016/j.physrep.2004.10.006 ↗
27. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
28. Common force field for graphite and polycyclic aromatic hydrocarbons10.1103/PhysRevB.60.12710 ↗
29. Electron-phonon coupling and Raman spectroscopy in graphene10.1103/PhysRevB.75.045404 ↗
30. Electronic properties of disordered two-dimensional carbon10.1103/PhysRevB.73.125411 ↗