Specific interface prepared by the SPS of chemically treated Mg-based powder
Source abstract
Abstract
Abstract This work focuses on a new way of preparation of magnesium-based composite materials by powder metallurgy. This method consists of combination of chemical treatment of magnesium powder in hydrofluoric acid and subsequent compaction by spark plasma sintering. As a result a continuous network of magnesium fluoride coating is created inside material. However, magnesium alloys behave differently in hydrofluoric acid. In the case of WE43 alloy a network consisting of magnesium fluoride and newly emerged yttrium fluoride is prepared. This specific interface of the prepared composite material resulted in a corrosion rate that was three times lower compared to that of the sample sintered without chemical treatment. The cause of improvement of corrosion properties is illustratively shown on the cuts of the samples after immersion. The corrosion front is slowed down on the fluoride interface. The presence of yttrium fluoride phases on the interface slightly reduced mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Inorganic Chemistry and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. The loss of dissolved zirconium in zirconium-refined magnesium alloys after remelting10.1007/s11661-009-9928-8 ↗
2. Mg-based porous metals as cancellous bone analogous material: a review
3. Gas formation and biological effects of biodegradable magnesium in a preclinical and clinical observation10.1080/14686996.2018.1451717 ↗
4. Biodegradable magnesium alloys developed as bone repair materials: a review
5. Porous magnesium alloys prepared by powder metallurgy, Mater
6. In vivo study on biodegradable magnesium alloys: bone healing around WE43 screws10.1177/0885328217743321 ↗
7. In vivo study of a biodegradable orthopedic screw (MgYREZr-alloy) in a rabbit model for up to 12 months10.1177/0885328212472215 ↗
8. Characterisation of strengthening precipitate phases in a Mg-Y-Nd alloy10.1016/S1359-6454(00)00013-6 ↗
9. Effect of T5 and T6 tempers on a hot-rolled WE43 magnesium alloy10.2320/matertrans.MRA2008602 ↗
10. Corrosion of magnesium alloys: the role of alloying10.1179/1743280414Y.0000000046 ↗
11. Magnesium and magnesium alloys
12. Enhancing microstructure and mechanical properties of AZ31-MWCNT nanocomposites through mechanical alloying
13. AE42 magnesium alloy prepared by spark plasma sintering10.1016/j.jallcom.2018.01.115 ↗
14. Surface modification of biodegradable magnesium and its alloys for biomedical applications10.1093/rb/rbu013 ↗
15. Corrosion and biocompatibility improvement of magnesium-based alloys as bone implant materials: a review10.1093/rb/rbx004 ↗
16. Corrosion behavior and cytocompatibility of fluoride-incorporated plasma electrolytic oxidation coating on biodegradable AZ31 alloy10.1093/rb/rbw036 ↗
17. Corrosion protection and surface treatment of magnesium alloys used for orthopedic applications
18. Preparation and characterization of hydroxyapatite coating on AZ31 Mg alloy for implant applications
19. Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy10.1007/s10853-011-5785-0 ↗
20. Preparation of compound coating of fluorine conversion layer and calcium phosphate on AZ31 magnesium alloy
21. In vitro study on degradation of AZ31B magnesium alloy with fluoride conversion coating10.1080/10667857.2016.1262311 ↗
22. Hydroxyapatite coating on magnesium with MgF(2) interlayer for enhanced corrosion resistance and biocompatibility10.1007/s10856-011-4431-3 ↗
23. Corrosion protection of WE43 magnesium alloy by fluoride conversion coating
24. A new approach in the preparation of biodegradable Mg-MgF2 composites with tailored corrosion and mechanical properties by powder metallurgy10.1016/j.matlet.2018.05.052 ↗
25. The influence of HF treatment on corrosion resistance and in vitro biocompatibility of Mg-Zn-Zr alloy10.1007/s11706-010-0025-0 ↗
26. Effectivity of fluoride treatment on hydrogen and corrosion product generation in temporal implants for different magnesium alloys10.1177/0954411913502166 ↗
27. Developing surface pre-treatments for electrophoretic deposition of biofunctional chitosan-bioactive glass coatings on a WE43 magnesium alloy10.1016/j.apsusc.2017.02.049 ↗
28. Corrosion resistance and cytotoxicity of a MgF2 coating on biomedical Mg-1Ca alloy via vacuum evaporation deposition method10.1002/sia.5257 ↗
29. Biocompatibility of fluoride-coated magnesium-calcium alloys with optimized degradation kinetics in a subcutaneous mouse model10.1002/jbm.a.34300 ↗
30. Turhan · 2012
31. Microstructure of the novel biomedical Mg–4Y–3Nd alloy prepared by spark plasma sintering10.1016/j.jallcom.2019.153008 ↗
32. Improved corrosion resistance of WE43 magnesium alloy with continuous network of MgF2 prepared by powder metallurgy10.1088/1757-899X/461/1/012016 ↗
33. Oxidation resistance of Mg-Y alloys at elevated temperatures and the protection performance of the oxide films10.1016/j.jallcom.2018.03.342 ↗
34. Magnesium composite materials prepared by extrusion of chemically treated powders10.21062/ujep/364.2019/a/1213-2489/MT/19/5/740 ↗
35. Barin · 1993
36. The thermodynamic properties of some metal fluorides solid-electrolyte galvanic-cell studies10.1016/0021-9614(74)90233-X ↗
37. Towards refining microstructures of biodegradable magnesium alloy WE43 by spark plasma sintering10.1016/j.actbio.2019.06.045 ↗
38. Superior properties of Mg–4Y–3RE–Zr alloy prepared by powder metallurgy10.1016/j.jmst.2016.09.019 ↗
39. The influence of yttrium (Y) on the corrosion of Mg–Y binary alloys10.1016/j.corsci.2010.07.019 ↗
40. On the biodegradation performance of an Mg–Y–RE alloy with various surface conditions in simulated body fluid10.1016/j.actbio.2008.07.034 ↗
41. Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings10.1016/j.corsci.2008.03.002 ↗
42. Corrosion of pure magnesium and a WE43 magnesium alloy studied by advanced acoustic emission analysis10.1016/j.corsci.2018.09.006 ↗
43. Advanced mechanical and corrosion properties of WE43 alloy prepared by powder metallurgy10.12693/APhysPolA.134.748 ↗
44. Corrosion mechanisms of magnesium alloys10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗
45. Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys10.1016/j.matchemphys.2019.122350 ↗
46. In vitro corrosion and biocompatibility of phosphating modified WE43 magnesium alloy10.1016/S1003-6326(13)62558-3 ↗
47. Linking the microstructure of a heat-treated WE43 Mg alloy with its corrosion behavior10.1016/j.corsci.2015.09.005 ↗
48. Microstructure and corrosion behaviour of laser surface melting treated WE43 magnesium alloy10.1039/C5RA27010C ↗