journal article·2020-10Open access

Influence of molar fraction of Mg/Al, on the electrochemical behavior of hycrotalcite-epoxy-graphite composites

Abel I. Balbin Tamayo, Ana Margarita Esteva Guas, Antonio A. Pupim Ferreira, Ricardo Q. Aucélio, Jhonny O. Huertas Flores

Abstract

Abstract The layered structure of hydrotalcite-like compounds is responsible for many chemical and physical properties attractive in designing electrodes for analytical applications. Mg/Al hydrotalcite-like materials were prepared with different Mg/Al molar ratios ranging from 1.5:1 to 6:1 and electrochemically characterized before being included into epoxy-graphite to form the electrode matrix. The electrochemical response of the electrodes was evaluated by the use of potassium ferro/ferricyanide redox pair as a probe for voltammetry and impedance spectroscopy. The electro-catalytic effect on the potassium ferro/ferricyanide redox pair showed was more effective when Mg and Al is 1.5:/1 M proportion due, apparently, to the more positively charged hydrotalcite layers and more affinity for anions such as Fe(CN)63−/4-. This epoxy-graphite-hydrotalcite composite presents the lowest potential difference and lowest loading transfer resistance associated with the hydrotalcite phase, which are desirable properties for potential electroanalytical purposes. The results indicated the potential application of the epoxy-graphite-hydrotalcite electrode for ion exchange of negative-charged chemical species.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Supercapacitor Materials and Fabrication · Inorganic Chemistry and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. New insight into the preferred valency of interlayer anions in hydrotalcite-like compounds: the effect of Mg/Al ratio10.1016/j.clay.2018.01.013 ↗
2. Layered double hydroxides — multifunctional nanomaterials10.2478/s11696-011-0100-8 ↗
3. Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent10.1016/j.chemosphere.2005.04.015 ↗
4. Sorption removal of anions and cations in single batch systems by uncalcined and calcined Mg-Al-CO3 hydrotalcite10.1023/A:1023999303895 ↗
5. Preparation and phosphate ion-exchange properties of a hydrotalcite-like compound10.1021/la00029a042 ↗
6. Anion-exchange properties of hydrotalcite-like compounds10.1346/CCMN.1983.0310409 ↗
7. Flammability characteristics and flame retardant mechanism of phosphate-intercalated hydrotalcite in halogen-free flame retardant EVA blends10.1016/j.polymdegradstab.2008.02.002 ↗
8. Rapid synthesis of hydrotalcite with high antacid activity10.1016/j.matlet.2011.12.115 ↗
9. On the action of hydrotalcite-like clay materials as stabilizers in polyvinylchloride10.1016/S0169-1317(00)00002-8 ↗
10. Layered double hydroxides: a brief review from fundamentals to application as evolving biomaterials10.1016/j.clay.2017.12.021 ↗
11. Zn,Al hydrotalcites calcined at different temperatures: preparation, characterization and photocatalytic activity in gas–solid regime10.1016/j.molcata.2011.04.015 ↗
12. A recyclable/reusable hydrotalcite supported copper nano catalyst for 1,4-disubstituted-1,2,3-triazole synthesis via click chemistry approach10.1016/j.tetlet.2017.12.051 ↗
13. Characteristics of a novel adsorbent Fe–Mg-type hydrotalcite and its adsorption capability of As(III) and Cr(VI) from aqueous solution10.1016/j.jiec.2017.10.005 ↗
14. Hydrodechlorination of 1,2,4-trichlorobenzene on nickel-based catalysts prepared from several Ni/Mg/Al hydrotalcite-like precursors10.1016/S0926-3373(01)00129-1 ↗
15. Sensors and biosensors based on clay-modified electrodes—new trends10.1016/j.clay.2004.06.005 ↗
16. Solvent and thiourea adsorption/intercalation effects on the solid-state electrochemistry of α-phase nickel hydroxide nanoparticles10.1007/s10008-005-0081-z ↗
17. Voltammetric and X-ray diffraction analysis of the early stages of the thermal crystallization of mixed Cu, Mn oxides10.1007/s10008-003-0439-z ↗
18. Electrochemical characterization of carbon paste electrodes modified with MgZnGa and ZnGaAl hydrotalcite-like compounds10.1007/s10008-013-2222-0 ↗
19. Facile preparation methods of hydrotalcite layered materials and their structural characterization by combined techniques10.1016/j.ica.2017.08.007 ↗
20. Mbd · 2018
21. Comportamiento electroquímico de un novedoso electrodo grafito-epóxido modificado para inmovilización covalente de ADN
22. Electrochemical characterization a new epoxy graphite composite electrode as transducer for biosensor
23. Characterization of a carbon paste electrode modified with tripolyphosphate-modified kaolinite clay for the detection of lead10.1016/j.talanta.2011.06.014 ↗
24. Compton · 2011
25. Electrochemical behaviour and electrical percolation in graphite-epoxy electrodes10.1007/BF00376284 ↗
26. Impedance characterization and modeling of electrodes for biomedical applications
27. Impedance spectroscopy characterization of porous electrodes under different electrode thickness using a symmetric cell for high-performance lithium-ion batteries10.1021/jp512564f ↗
28. Lvovich · 2012
29. Cesiulis · 2016 · 3
30. Brett · 1993
31. Langhus · 2001