journal article·2020-01

Comparison of microwave and conventionally sintered manganese and niobium doped lanthanum germanate based apatites by micro Raman Spectroscopy

Chetan Sharma, Kanchan L. Singh, Anirudh P. Singh, Payal Sharma, Sonia Mago, Vandana Naithani, Ravinder Kumar Chadha

Publisher page

Abstract

Abstract In this paper, the effect of microwave and conventional sintering on doping behaviour of Mn2+ and Nb5+ in lanthanum germanate based apatite have been compared. The precursor of apatite has been prepared by mixed oxide method and conventionally calcined at 1100 °C for 6 h. The resulting powders have been sintered by microwave energy at 1400 °C for 30 min and by conventional heating 1400 °C for 4 h. The products prepared have been characterized by X-ray diffraction, scanning electron microscope, Micro Raman spectroscopy, and Vicker's hardness and the results are compared. The apatites of similar compositions sintered by microwave energy have higher density and hardness than the apatites sintered by electric heating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave-Assisted Synthesis and Applications · Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Apatite germanates doped with tungsten: synthesis, structure, and conductivity10.1039/C0DT00690D ↗
2. Microwave-assisted preparation of Nano-hydroxyapatite for bone substitutes10.1016/j.ceramint.2015.11.044 ↗
3. Fabrication of transparent hydroxyapatite ceramics by microwave processing10.1016/0167-577X(95)00016-X ↗
4. Rapid sintering of hydroxyapatite by microwave processing, ceramic transactions
5. Microwave sintering of hydroxyapatite10.1557/JMR.1994.0180 ↗
6. Microwave sintering of hydroxyapatitebased composites, ceramic transactions
7. Influence of microwave processing and sintering temperature on the structure and properties of Sr/Zr doped hydroxyapatite10.1016/j.matchemphys.2018.09.086 ↗
8. Ionic conductivity of lanthanoid silicates, La10(SiO4)6O3, (ln = La, Nd, Sm, Gd, Dy, Y, Ho, Er, and Yb)10.1039/jm9950501801 ↗
9. Interstitial oxygen conduction in lanthanum oxy-apatite electrolytes10.1039/B315257J ↗
10. Raman spectroscopy studies of apatite-type germanate oxide ion conductors: correlation with interstitial oxide ion location and conduction10.1039/b922834a ↗
11. Developing apatites for solid oxide fuel cells: insight into structural, transport and doping properties10.1039/b704426g ↗
12. Synthesis of hexagonal lanthanum germanate apatites through site-selective isovalent doping with yttrium10.1016/j.materresbull.2007.07.041 ↗
13. Framework «interstitial» oxygen in La10(GeO4)5(GeO5)O2 apatite electrolyte10.1107/S0108768107024317 ↗
14. A taxonomy of apatite frameworks for the crystal-chemical design of fuel cell electrolytes10.1016/j.jssc.2008.03.028 ↗
15. Ionic conductivity and fuel cell properties of apatite-type lanthanum silicates doped with Mg and containing excess oxide ions10.1016/j.ssi.2008.07.022 ↗
16. High oxide ion conductivity in Al-doped germanium oxy apatite10.1021/cm048361r ↗
17. Interstitial oxygen in oxygen-stoichiometric apatites10.1039/b503374h ↗
18. Atomic-scale mechanistic features of oxide ion conduction in apatite-type germanates10.1039/B716814D ↗
19. Neutron diffraction structural study of the apatite-type oxide ion conductor, La8Y2Ge6O27: location of the interstitial oxide ion site10.1039/b911404a ↗
20. Raman spectroscopy studies of apatite-type germanate oxide ion conductors: correlation with interstitial oxide-ion location and conduction10.1039/b922834a ↗
21. Investigation of the influence of oxygen content on the conductivities of Ba doped lanthanum germanate apatites10.1016/j.ssi.2007.11.014 ↗
22. New approach to improve the conductivity of apatite-type lanthanum germanate La9.33Ge6O26 as an electrolyte for IT-SOFCs10.1039/C4RA00713A ↗
23. Raman Microspectrometry applied to the study of electrode materials for lithium batteries10.1021/cr800344k ↗
24. Comparative analysis of yttria stabilized zirconia (YSZ) and titania doped YSZ (YZT) sintered by two different routes: conventional and microwave processing10.13005/ojc/340541 ↗
25. Microwave and conventional processing of niobium and manganese doped lanthanum germanate based apatites10.1016/j.matchemphys.2018.07.002 ↗
26. Preparation of fully cubic calcium-stabilized zirconia with 10 mol% calcium oxide dopant concentration by microwave processing10.1111/j.1551-2916.2006.01379.x ↗
27. Effect of microwave energy on Titania doped YSZ
28. Evidence of uniform microstructure in microwave sintered yttria stabilized zirconia (YSZ) by impedance analysis in
29. Singh · 2014 · 61
30. Structural and electrical analysis of microwave processed YSZ electrolytes for SOFC Prepared by co-precipitation method10.1007/s11837-016-2145-1 ↗
31. Effect of dopants and Sintering method on the properties of ceria-based Electrolyte for IT-SOFCs10.1007/s11837-018-2928-7 ↗
32. Preparation of YZT a mixed conductor by microwave processing: a different mechanism in the solid-state thermochemical reaction10.1016/j.matchemphys.2018.06.026 ↗
33. Influence of microwave processing and sintering temperature on the structure and properties of Sr/Zr doped hydroxyapatite10.1016/j.matchemphys.2018.09.086 ↗
34. Effect of microwave energy on Titania doped YSZ
35. Microwave processing of electroceramic materials and devices10.1007/s10832-008-9441-2 ↗
36. Microwave synthesis of aluminum titanate in air and nitrogen
37. Neck growth kinetics during microwave sintering of copper10.1016/j.scriptamat.2009.12.036 ↗
38. Microwave effects in lead zirconium titanate synthesis: enhanced kinetics and changed mechanisms10.1111/j.1151-2916.2001.tb00816.x ↗
39. Stabilization of the high-temperature phase and total conductivity of yttrium-doped lanthanum germanate oxy apatite10.2109/jcersj2.17198 ↗
40. Facile synthesis, Characterization and electrical properties of apatite-type lanthanum germanates10.1016/j.solidstatesciences.2005.11.004 ↗
41. Raman spectra of La2O3 dispersed on Al2O310.1006/jcat.1998.2187 ↗
42. Raman spectroscopy studies of apatite-type germanate oxide ion conductors: correlation with interstitial oxide ion location and conduction10.1039/b922834a ↗
43. Cullity · 1978
44. Effects of Nb5+, Mo6+, and W6+ dopants on the germanate-based apatites as an electrolyte for use in solid oxide fuel cells10.1016/j.ijhydene.2013.06.123 ↗
45. Transition metal-doped lanthanum germanate apatites as electrolyte materials of solid oxide fuel cells10.1016/j.ssi.2013.05.018 ↗
46. Effect of titania addition on yttria-stabilized tetragonal zirconia ceramics sintered at high temperatures10.1016/j.ceramint.2003.10.025 ↗
47. Heat capacity changes and structural relaxation at glass transition in mixed-alkali tellurite glasses10.1016/S0022-3093(97)90115-0 ↗
48. Effect of MgO on structural, thermal and conducting properties of V2-xMgxO5-δ (x = 0.05–0.30) systems10.1016/j.ceramint.2018.09.231 ↗
49. Study of influence techniques on the properties of yttria - ceria-zirconia system as an electrolyte for solid oxide fuel cells10.1007/s11664-019-07094-w ↗
50. Effect of microwave sintering on the properties of Zirconia based ceramic electrolytes for Solid Oxide Fuel Cells10.1080/0371750X.2019.1578695 ↗
51. Effect of microstructure on the ionic conductivity of an all-solid-state battery electrode10.1149/2.0601902jes ↗
52. Rahaman · 2003
53. Microwave sintering of ceramics, composites and metallic materials and melting of glasses10.1080/0371750X.2006.11012292 ↗
54. Microwave processing of ceramics10.1016/S1359-0286(98)80011-9 ↗
55. Microwave and conventional sintering of 90W-7Ni-3Cu alloys with a premixed and pre-alloyed binder phase10.1016/j.msea.2010.07.074 ↗
56. Peculiarities of the neck growth process during the initial stage of spark-plasma, microwave and conventional sintering of WC spheres10.1016/j.jallcom.2012.01.146 ↗