Structural characterization of Fe Pd nanowires grown by electrodeposition using an acid electrolyte
Source abstract
Abstract
Abstract Fe70Pd30 nanostructures have potential application in actuators due to their conventional and magnetic shape memory. Here, we report the microstructure of electrodeposition grown Fe Pd nanowires in which the process was confined to polycarbonate membranes with a nominal pore diameter of 200 nm. We used an acid electrolyte (pH ≈ 5) in which the solution was stabilized with sulfosalicylic acid. The average chemical concentration of the nanowires can be systematically shifted from rich palladium to rich iron by changing the growth potential. The study of the microstructure by transmission electron microscopy indicates high chemical inhomogeneities due to phase coexistence between rich palladium regions (with FCC structure) and rich iron regions. The latter present a combination of BCC and amorphous phases. The average chemical composition of the nanowires can be better adjusted by using a low frequency square wave voltage excitation (alternating rich Pd and rich Fe regions). However, independently of the growth process, the nanowires morphology collapses after thermal annealing. This could be ascribed to fragile grain boundaries due to the presence of amorphous hydroxides and chemical impurities produced during the electrochemical process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Anodic Oxide Films and Nanostructures · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Inorganic nanowires10.1016/j.progsolidstchem.2003.08.001 ↗
2. Magnetism of Fe, Co and Ni nanowires in self-assembled arrays10.1088/0953-8984/13/25/201 ↗
3. Fabrication and magnetic properties of arrays of metallic nanowires10.1126/science.261.5126.1316 ↗
4. Phase transformation in free-standing SMA nanowires10.1016/j.actamat.2010.11.053 ↗
5. Single crystalline β phase Cu-Zn nanowires: synthesis and martensitic transformation10.1016/j.matlet.2014.03.101 ↗
6. Comparing properties of substrate-constrained and freestanding epitaxial Ni–Mn–Ga films10.1016/j.actamat.2010.02.016 ↗
7. Martin · Electrochim. Acta · 2008 · 53 · 631710.1016/j.electacta.2008.04.018 ↗
8. Giant magnetic-field-induced strain in NiMnGa seven-layered martensitic phase10.1063/1.1458075 ↗
9. Magnetic field-induced reversible variant rearrangement in Fe–Pd single crystals10.1016/j.actamat.2004.07.014 ↗
10. Phase transformation and magnetic anisotropy of an iron–palladium ferromagnetic shape-memory alloy10.1016/j.actamat.2003.08.024 ↗
11. Thickness dependence of transformation characteristics of Ni–Mn–Ga thin films deposited on alumina: experiment and modeling10.1016/j.msea.2006.02.055 ↗
12. Film lift-off from MgO: freestanding single crystalline Fe-Pd films suitable for magnetic shape memory actuation - and beyond10.1002/adma.201002183 ↗
13. Size effects in the superelastic response of Ni54Fe19Ga27 shape memory alloy pillars with a two stage martensitic transformation10.1016/j.actamat.2012.06.035 ↗
14. Size dependence of martensite transformation temperature in ferromagnetic shape memory alloy FePd10.1063/1.2890143 ↗
15. Nanostructured Fe–Pd thin films for thermoelastic shape memory alloys—electrochemical preparation and characterization10.1016/j.electacta.2005.11.044 ↗
16. Electrodeposition of Fe70Pd30 nanowires from a complexed ammonium–sulfosalicylic electrolyte with high stability10.1016/j.elecom.2010.05.043 ↗
17. Structure, microstructure, and magnetism of electrodeposited Fe70Pd30 nanowires10.1021/jp1077455 ↗
18. Lowenheim · 1973
19. Palladium-iron alloy electrodeposition. Part I. Single metal systems10.1080/00202967.2000.11871297 ↗
20. Preparation and characterization of electrodeposited Fe–Pd binary alloy film10.2320/matertrans.44.649 ↗
21. Electrodeposition of iron–palladium thin films10.1016/j.electacta.2008.03.001 ↗
22. Electrochemical studies of Fe and Pd deposition and their influence on the co-deposition of the Fe–Pd alloy10.1016/j.jelechem.2014.11.027 ↗
23. Fabrication and magnetic properties of Fe–Pd nanowire arrays10.1016/j.ssc.2006.09.042 ↗
24. Martensitic phase transformations in nanocrystalline NiTi studied by TEM10.1016/j.actamat.2003.08.036 ↗
25. Phase structure of electrodeposited alloys10.1016/j.electacta.2005.03.060 ↗
26. First-principles determination of low-temperature order and ground states of Fe-Ni, Fe-Pd, and Fe-Pt, Phys10.1103/PhysRevB.80.220201 ↗
27. Structures in textured Cu–Al–Ni shape memory thin films grown by sputtering10.1016/j.matchar.2014.08.005 ↗
28. Dependence of electrocatalytic activity on film thickness for the hydrogen evolution reaction of Pd overlayers on Au(1 1 1)10.1016/j.electacta.2008.01.097 ↗
29. Franke · 2005
30. A comparative study of the electrochemical deposition kinetics of iron-palladium alloys on a flat electrode and in a porous alumina template. Electrochim