journal article·2019-12

Enhanced sodium storage characteristics of P2-Na2/3Mn3/4Co1/4O2 cathode co-modified by La2O3 and TiO2 oxide

Lijun Wang, Yanzhi Wang, Xiaheng Yang, Jinlong Wang, Yanhong Li, Jiabin Zhao

Publisher page

Abstract

Abstract A sodium-rich P2-Na2/3Mn3/4Co1/4O2 cathode is co-modified by La2O3 and TiO2 oxide through a solid-state method. Rietveld refinement confirms that a few La3+ and Ti4+ ions have substituted the Na sites and the TM sites in the crystal lattice of P2-Na2/3Mn3/4Co1/4O2, respectively, which leads to the enlargement of Na–O bond length and Na+ migration channels, and the shrinkage of TM–O and O–O bonds. Surface co-modification has reduced Na+ migration resistance, increased Na+ diffusion coefficient and stabilized crystal structure, which can significantly enhance its rate capability and especially cycle stability. The modified layers have been formed on the surface of the Na2/3Mn3/4Co1/4O2, which is capable of preventing the Na2/3Mn3/4Co1/4O2 oxide from exfoliation caused by the surface reactions in the electrode/electrolyte interfaces. It will help to stabilize the layered structure, alleviate Jahn–Teller distortion and form a thinner interface film among the electrode/electrolyte. The optimum modified cathode oxide is prepared using 1 wt% composite oxide in which the mass ratio of La2O3 and TiO2 is 1:1. In the voltage range of 1.8–4 V, the optimum modified cathode delivers a maximum areal capacity of 164.3 mAh g−1 cm−2 at 0.1 C with the capacity retention of 89.5% at 50th cycle and 81.7% after 100 cycles. When cycling at 10 C, it can retain 90.1% of its maximum 79.9 mAh g−1 cm−2 at 240th cycle, and its capacity retention is up to 80.2% even after 400 cycles. The excellent cycle stability, especially superior high-rate cycle stability, can still be traced back to the dual effects of the surface modification and the substitution of La3+ or Ti4+ ions. The high-performance cathode material co-modified by the La2O3 and the TiO2 oxide will give impetus to the development and research of cathode layered oxides for SIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
2. Single crystalline Na0.7MnO2 nanoplates as cathode materials for sodium-ion batteries with enhanced performance10.1002/chem.201301563 ↗
3. Synthesis and electrochemical properties of P2-Na2/3Ni1/3Mn2/3O210.1007/s11581-014-1249-2 ↗
4. Structural classification and properties of the layered oxides10.1016/0378-4363(80)90214-4 ↗
5. Dual stabilization and sacrificial effect of Na2CO3 for increasing capacities of Na-ion cells based on P2-NaxMO2 electrodes10.1021/acs.chemmater.7b01542 ↗
6. A layered P2- and O3-type composite as a high-energy cathode for rechargeable sodium-ion batteries10.1002/anie.201411788 ↗
7. Influence of the manganese and cobalt content on the electrochemical performance of P2-Na0.67MnxCo1−xO2 cathodes for sodium-ion batteries10.1039/C7DT04372D ↗
8. Electrode properties of P2–Na2/3MnyCo1–yO2 as cathode materials for sodium-ion batteries10.1021/jp406433z ↗
9. Sodium and manganese stoichiometry of P2-type Na2/3MnO210.1002/anie.201606415 ↗
10. CeO2-modified P2–Na–Co–Mn–O cathode with enhanced sodium storage characteristics10.1039/C8RA04210A ↗
11. Stable layered P3/P2 Na0.66Co0.5Mn0.5O2 cathode materials for sodium-ion batteries10.1039/C5TA05205J ↗
12. Simultaneous reduction of Co3+ and Mn4+ in P2-Na2/3Co2/3Mn1/3O2 as evidenced by X-ray absorption spectroscopy during electrochemical sodium intercalation10.1021/cm403597h ↗
13. The P2-Na2/3Co2/3Mn1/3O2 phase: structure, physical properties and electrochemical behavior as positive electrode in sodium battery10.1039/c1dt10798d ↗
14. A P2-Na0.67Co0.5Mn0.5O2 cathode material with excellent rate capability and cycling stability for sodium ion batteries10.1039/C6TA02845D ↗
15. Novel P2-type concentration-gradient Na0.67Ni0.167Co0.167Mn0.67O2 modified by Mn-rich surface as cathode material for sodium ion batteries10.1016/j.jpowsour.2018.06.050 ↗
16. Utilizing Co2+/Co3+ redox couple in P2-Layered Na0.66Co0.22Mn0.44Ti0.34O2 cathode for sodium ion batteries10.1002/advs.201700219 ↗
17. A study on electrochemical properties of P2-type Na–Mn–Co–Cr–O cathodes for sodium-ion batteries10.1039/C7QI00778G ↗
18. A high-performance P2-Na0.70Mn0.80Co0.15Zr0.05O2 cathode for sodium-ion batteries
19. Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: the capacity decay mechanism and Al2O3 surface modification10.1016/j.nanoen.2016.06.026 ↗
20. Facile synthesis and enhanced electrochemical performances of Li2TiO3-coated lithium-rich layered Li1.13Ni0.30Mn0.57O2 cathode materials for lithium-ion batteries10.1016/j.jpowsour.2015.06.059 ↗
21. Highly stable Na2/3(Mn0.54Ni0.13Co0.13)O2 cathode modified by atomic layer deposition for sodium-ion batteries10.1002/cssc.201500155 ↗
22. Carbon-coated P2-type Na0.67Ni0.33Ti0.67O2 as an anode material for sodium ion batteries10.1007/s10008-015-2826-7 ↗
23. Cu-doped P2-Na0.5Ni0.33Mn0.67O2 encapsulated with MgO as a novel high voltage cathode with enhanced Na-storage properties10.1039/C6TA10334K ↗
24. Surface modification of Li[Ni0.3Co0.4Mn0.3]O2 cathode by Li–La–Ti–O coating10.1016/j.jpowsour.2009.10.080 ↗
25. Enhanced electrochemical and storage properties of La2/3−xLi3xTiO3-coated Li[Ni0.4Co0.3Mn0.3]O210.1016/j.electacta.2011.06.030 ↗
26. Enhanced electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 by surface modification with the fast lithium-ion conductor Li–La–Ti–O10.1016/j.jpowsour.2017.08.050 ↗
27. Effects of protecting layer [Li,La]TiO3 on electrochemical properties of LiMn2O4 for lithium batteries10.1016/j.jallcom.2011.01.110 ↗
28. Electrochemical characterizations of surface modified LiMn2O4 cathode materials for high temperature lithium battery applications10.1016/j.tsf.2011.07.001 ↗
29. Surface modification of LiNi1/3Co1/3Mn1/3O2 with Cr2O3 for lithium ion batteries10.1007/s12598-012-0479-6 ↗
30. Electrochemical performance of La2O3-coated layered LiNiO2 cathode materials for rechargeable lithium-ion batteries10.1007/s11581-012-0821-x ↗
31. Enhanced high-potential and elevated-temperature cycling stability of LiMn2O4 cathode by TiO2 modification for Li-ion battery10.1016/j.electacta.2006.04.054 ↗
32. Electrochemical performance of LiNi0.5Mn1.5O4 doped with La and its compatiblity with new electrolyte system10.1134/S102319351310011X ↗
33. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
34. Effect of treated temperature on structure and performance of LiCoO2 coated by Li4Ti5O1210.1016/j.surfcoat.2011.02.003 ↗
35. Novel composites Li[LixNi0.34–xMn0.47Co0.19]O2, (0.18 ≤ x ≤ 0.21): synthesis and application as high-voltage cathode with improved electrochemical performance for lithium ion batteries10.1016/j.electacta.2012.07.069 ↗
36. Lange’s handbook of chemistry10.1080/10426919008953291 ↗
37. Evidence of a pseudo-capacitive behavior combined with an insertion/extraction reaction upon cycling of the positive electrode material P2-NaxCo0.9Ti0.1O2 for sodium-ion batteries
38. Structure modulation and performance optimization of P2-Na0.7Mn0.75Fe0.25-x-yNixCoyO2 through a synergistic substitution of Ni and Co for Fe10.1016/j.electacta.2018.04.216 ↗
39. Water sensitivity of layered P2/P3-NaxNi0.22Co0.11Mn0.66O2 cathode material10.1039/C4TA02627F ↗
40. Electrochemical performance of Na0.6[Li0.2Ni0.2Mn0.6]O2 cathodes with high-working average voltage for Na-ion batteries10.1039/C6TA10577G ↗
41. Enhanced cycling stability of La modified LiNi0.8–xCo0.1Mn0.1LaxO2 for Li-ion battery10.1016/S1003-6326(17)60132-8 ↗
42. NIST X-ray photoelectron spectroscopy database
43. Electrochemical properties of tetravalent Ti-doped spinel LiMn2O410.1007/s10008-010-1195-5 ↗
44. Enhanced electrochemical performance of Na2/3[Mn0.55Ni0.30Co0.15]O2 positive electrode in sodium-ion batteries by functionalized multi-walled carbon nanotubes10.1016/j.electacta.2017.03.204 ↗
45. Improved electrochemical performance of P2-type Na0.67Lix(Mn0.5Fe0.25Co0.25)1-xO2 cathode materials from Li ion substitution of the transition metal ions10.1007/s10853-018-03194-w ↗