Melt-mixed PA-6/LDPE-g-MA/nanoclay ternary nanocomposite: Micro-mechanisms from post-yield fracture kinetics and strain field analysis
Source abstract
Abstract
Abstract The post-yield fracture behavior of nanoclay filled polyamide-6 (PA-6)/low density polyethylene-grafted-maleic anhydride (LDPE-g-MA) based ternary nanocomposites revealed a prominent semiductile-to-ductile transition in the deformation mode characterized by the essential work of fracture (EWF) parameters. The fracture parameters in terms of crack-extension (Δ a ) and crack tip opening displacement (CTOD; δ ) were quantified and the crack-toughness aspects have been critically discussed in the realms of CTOD-rate as a measure of blunting efficiency. The crack resistance behavior revealed a three-staged crack extension in combination with a two-stepped crack tip opening displacement (CTOD) phenomena. The CTOD-rate dependent fracture transitions have been qualitatively ascertained. To ascertain the kinetic and dynamics of crack growth micro-mechanisms time-synchronized deformation data prior to failure were acquired and analyzed using digital image correlation technique followed by the integral computation of deformation-stage images using the ARAMIS-GOM software to lead to strain field contours. The strain field so obtained revealed the distinct nature of energy dissipation in the inner-fracture process zone (IFPZ) and outer-plastic deformation zones (OPDZ). Such quantification of the stress wave dissipation modes via strain field analysis demonstrates fundamentally a new approach to understand fracture-mechanics for designing materials objectively aided by convincing visualization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Qian · Appl. Phys. Lett. · 2000 · 76 · 286810.1063/1.126500 ↗
2. Schadler · Appl. Phys. Lett. · 1998 · 73 · 384210.1063/1.122911 ↗
3. Gubeljak · Eng. Fract. Mech. · 2011 · 78 · 228610.1016/j.engfracmech.2011.05.002 ↗
4. Lach · Mech. Time-Depend. Mater. · 2005 · 9 · 10310.1007/s11043-005-1084-y ↗
5. Wang · Macromolecules · 2005 · 38 · 78810.1021/ma048465n ↗
6. Wetzel · Eng. Fract. Mech. · 2006 · 73 · 237510.1016/j.engfracmech.2006.05.018 ↗
7. Gul · Polym. Mech. · 1972 · 8 · 43010.1007/BF00856368 ↗
8. Ginman · J. Appl. Phys. · 1978 · 49 · 232810.1063/1.325118 ↗
9. Lach · 2005
10. Lach · J. Mater. Sci. · 2004 · 39 · 128310.1023/B:JMSC.0000013887.79570.33 ↗
11. Christensen · Int. J. Fract. · 1979 · 15 · 310.1007/BF00115904 ↗
12. Christensen · Eng. Fract. Mech. · 1981 · 14 · 21510.1016/0013-7944(81)90029-1 ↗
13. Boccaccini · Compos. Sci. Technol. · 2005 · 65 · 32510.1016/j.compscitech.2004.08.002 ↗
14. Zhurkov · Theor. Appl. Fract. Mech. · 1984 · 1 · 27110.1016/0167-8442(84)90007-7 ↗
15. 2001 · 3
16. Jerabek · Polym. Test. · 2010 · 29 · 40710.1016/j.polymertesting.2010.01.005 ↗
17. Kahlen · Polym. Test. · 2010 · 29 · 7210.1016/j.polymertesting.2009.09.007 ↗
18. Seyhan · Mater. Chem. Phys. · 2009 · 118 · 23410.1016/j.matchemphys.2009.07.045 ↗
19. Conradi · Mater. Chem. Phys. · 2013 · 137 · 91010.1016/j.matchemphys.2012.11.001 ↗
20. Farhamand · 2001
21. Satapathy · Macromol. Rapid Commun. · 2005 · 26 · 124610.1002/marc.200500234 ↗
22. Staudinger · Acta Mater. · 2007 · 55 · 584410.1016/j.actamat.2007.06.040 ↗
23. Satapathy · Eng. Fract. Mech. · 2006 · 73 · 239910.1016/j.engfracmech.2006.04.016 ↗
24. Dayma · J Polym Res. · 2012 · 19 · 110.1007/s10965-012-0038-8 ↗
25. Dayma · Macromol. Mater. Eng. · 2013
26. ARAMIS, Company GOM, Available from: www.aramis.com.
27. Standard Draft of ESIS TC4 · 2000
28. Anderson · 1995
29. Yongqi · Exp. Mech. · 1996 · 36 · 19310.1007/BF02318006 ↗
30. Tanniru · Polymer · 2006 · 47 · 213310.1016/j.polymer.2006.01.063 ↗
31. Hristov · Polym. Test. · 2004 · 23 · 58110.1016/j.polymertesting.2003.10.011 ↗
32. Li · J. Mater. Sci. · 2002 · 37 · 244710.1023/A:1015471002812 ↗
33. Zhurkov · J. Polym. Sci.: Polym. Phys. Ed. · 1974 · 12 · 38510.1002/pol.1974.180120211 ↗
34. Teng · Polymer · 1996 · 37 · 238510.1016/0032-3861(96)85350-X ↗
35. Gabrielle · Macromolecules · 2011 · 44 · 700610.1021/ma2010926 ↗
36. Cotterell · Int. J. Fract. · 1977 · 13 · 26710.1007/BF00040143 ↗
37. Mai · Int. J. Fract. · 1986 · 32 · 10510.1007/BF00019787 ↗
38. Numerical simulation of the essential work of fracture method
39. Arkhireyeva · J. Mater. Sci. · 1999 · 34 · 596110.1023/A:1004776627389 ↗
40. Plucknett · Polymer · 2000 · 41 · 683310.1016/S0032-3861(00)00041-0 ↗
41. Mai · J. Polym. Sci. Part B: Polym. Phys. · 1991 · 29 · 78510.1002/polb.1991.090290702 ↗
42. Kuno · Exp. Polym. Lett. · 2008 · 2 · 40410.3144/expresspolymlett.2008.49 ↗
43. Arencon · Materials · 2009 · 2 · 204610.3390/ma2042046 ↗
44. Tirumala · J. Phys. Chem. B · 2008 · 112 · 802410.1021/jp8002454 ↗
45. Dayma · Mater. Des. · 2012 · 33 · 51010.1016/j.matdes.2011.04.057 ↗
46. Preschilla · Polymer · 2008 · 49 · 428510.1016/j.polymer.2008.07.030 ↗
47. Dayma · Mater. Des. · 2010 · 31 · 469310.1016/j.matdes.2010.05.024 ↗
48. Dziadur · Mater. Chem. Phys. · 2003 · 81 · 35610.1016/S0254-0584(03)00021-X ↗