journal article·2018-09

The effect of ion irradiation on the electron work function of stainless steel

Ákos Horváth, Norbert Nagy, Gábor Vértesy, Robert Schiller

Publisher page

Abstract

Abstract Stainless steel samples AISI 321 were iradiated with 100 keV H+ and 30 keV Ar+ ions in order to reveal the eventual variation of electron work function, Φ due to high energy radiation. The practical aspect of the research was connected to the change of the steel's corrosion resistance in a nuclear reactor. Work function was measured by the Ambient Kelvin Probe method. Irradiation by Ar+ was found to bring about a decrease whereas that by H+ an increase in the work function. To our knowledge these are the first attempts to reveal the effect of ion irradiation on metal work function. The change, ΔΦ exhibited extrema as a function of displacement per atom (DPA) in both cases. The observations were interpreted in terms of the Lang-Kohn theory which describes Φ as a difference between a surface and a bulk potential. The two types of radiation influence the metal density in the same sense and extent but Ar+ ions affect mainly the near-surface region whereas H+ ions act in the bulk. The opposing signs of the contributions from the two regions account for the opposing effects. Since ΔΦ is a linear function of the variation of the electrode potential, irradiation by Ar+ weakens whereas that by H+ strengthens the alloy's corrosion stability, as far as thermodynamics is concerned.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Fusion materials and technologies · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. The electrode potential
2. Goodisman · 1987
3. Bockris · 1993
4. Schmickler · 2010
5. Jones · 1996
6. Variation of electron work function with temperature and its effect on the Young's modulus of metals10.1016/j.scriptamat.2014.11.022 ↗
7. Ambient pressure photoemission spectroscopy of metal surfaces10.1016/j.apsusc.2014.08.159 ↗
8. Jäckle
9. Ambient Kelvin Probe · 2014 · 1
10. Fermi level, work function and vacuum level10.1039/C5MH00160A ↗
11. Rudy Schlaf
12. Theory of metal surfaces: work function10.1103/PhysRevB.3.1215 ↗
13. Was · 2007
14. Challenges to the use of ion irradiation for emulating reactor irradiation10.1557/jmr.2015.73 ↗
15. Particle irradiation and electron work function: Fe single crystal bombarded with Ar+ ions10.1016/j.radphyschem.2015.12.012 ↗
16. Correlation of neutron and heavy-ion damage I. The influence of dose rate and injected helium on swelling in pure nickel10.1016/0022-3115(78)90513-5 ↗
17. Water radiolysis and its effect upon in-reactor zircaloy corrosion10.1080/00337577608240827 ↗
18. Burns · 1979
19. Analysis of water radiolysis in relation to stress corrosion cracking of stainless steel at high temperatures – effect of water radiolysis on limiting current densities of anodic and cathodic reactions under irradiation10.1016/j.jnucmat.2005.11.011 ↗
20. A facility for studying irradiation accelerated corrosion in high temperature water10.1016/j.jnucmat.2014.03.022 ↗
21. Characterization of irradiated single crystals of Fe and Fe-15 Cr10.1016/j.actamat.2008.11.042 ↗
22. Assessment of radiation-induced segregation mechanisms in austenitic and ferritic–martensitic alloys10.1016/j.jnucmat.2011.01.031 ↗
23. Phase and structural transformations in metallic iron under the action of heavy nuclei10.1016/j.apradiso.2013.09.015 ↗
24. Corrosion under argon irradiation in the low MeV range: a study coupling AFM and Spectroscopic Ellipsometry10.1016/j.nimb.2013.09.049 ↗
25. Ziegler
26. Metals Handbook · 1990 · vol. 1
27. On the atmospheric corrosion of metals which are covered with thin electrolyte layers—I. Verification of the experimental technique10.1016/0010-938X(90)90032-Z ↗
28. Influence of surface morphology on corrosion and electronic behavior10.1016/j.actamat.2005.09.017 ↗
29. Interrelation of work function and surface stability: the case of BaAl410.1021/cm050641z ↗
30. Variations of work function and corrosion behaviors of deformed copper surfaces10.1016/j.apsusc.2004.07.017 ↗
31. Radiation-induced degradation of stainless steel light water reactor internals10.1016/j.mser.2012.05.002 ↗
32. Irradiation effects of HT-9 martensitic steel10.5516/NET.07.2013.706 ↗
33. Korn · 1968
34. http://physweb.bgu.ac.il/COURSES/QuantumMechCohen/ExercisesPool/EXERCISES/ex_1200_sol_Y11.pdf.