journal article·2005-02

A method for characterizes the interface between carbon fiber and epoxy resin: three-parameters exponential pattern

Junqing Li, Hengyi Ma, Yudong Huang

Materials Chemistry and Physics· Volume 89· Issue 2-3
Publisher page

Abstract

Abstract A new method for characterizing the interfacial performance between fiber and matrix was introduced in this paper, which was called three-parameters exponential pattern method (TPEPM). TPEPM belongs to neither macro- nor micro-measurement method. It was able to characteristic both macro- and micro-interfacial performance of composites efficiently at the same time. It could be attributed to meso mearsurement method. After verified by traditional method (short beam shear), it proved that the method of three-parameters exponential pattern has high reliability. The periodic time of experiment was shorter and could obtain more effective datum than before. The process of producing specimens as well as the procedure of testing was described detailedly. The way of testing the shear strength was according to the following formula: τ = P / b l . In this formula, τ is the shear strength (MPa), P the shear force (N), bl express the area of adhesion. The dispersion pattern graph of shear strength (τ) and adhesion area (s) was made. It can be found that they have the similar variation regularity with exponential curve, which was proved by a great deal of experiment. The three-parameters exponential curve was fitted by the method of least squares. The variable regularity of the parameters τ0, τ1 and λ were compared with interlaminar shear strength (short beam shear). It was proved that the method was reliable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. The influence of fibre surface properties on the mode of failure in carbon-fibre/epoxy composites10.1016/S0266-3538(98)00012-8 ↗
2. Synthesis of unsaturated polyesters for improved interfacial strength in carbon fibre composites10.1016/S1359-835X(02)00077-5 ↗
3. Modeling of stable and unstable fracture of short beam shear specimens10.1016/0010-4361(94)90094-9 ↗
4. Effect of low-power air plasma treatment on the mechanical properties of carbon fibres and the interfacial shear strength of carbon fibre–epoxy composites10.1002/sia.740230507 ↗
5. Experimental and theoretical evaluations of the Iosipescu shear test for hybrid fiber composites
6. Analysis of the Iosipescu shear test as applied to unidirectional carbon-fibre reinforced composites10.1016/0266-3538(90)90018-Z ↗
7. Design, development, and implementation of test methods for determination of through thickness properties of laminated composites10.1179/146580100101541355 ↗
8. Analysis of composite test methods using Raman spectroscopy
9. Electrochemical oxidation of carbon fibres: surface chemistry and adhesion10.1016/S1359-835X(00)00123-8 ↗
10. Effect of moisture on the interfacial shear strength: a study using the single fiber fragmentation test
11. Effects of plasma oxidation on the surface and interfacial properties of ultra-high modulus carbon fibres10.1016/S1359-835X(00)00109-3 ↗
12. Interfacial toughness evaluation from the single-fiber fragmentation test10.1016/0266-3538(96)00096-6 ↗
13. Estimation of fibre and interfacial shear strength by using a single-fibre composite10.1016/0266-3538(95)00078-X ↗
14. Estimation of interfacial shear strength: an application of a new statistical theory for single fiber composite test10.1016/S0266-3538(99)00064-0 ↗
15. Strength studies of single carbon fibres in model composite fragmentation tests10.1016/0010-4361(94)90095-7 ↗
16. Fibre fragment distribution in a single-fibre composite tension test10.1016/S1359-8368(01)00003-8 ↗
17. Mechanical, surface and interfacial characterization of pitch and PAN-based carbon fibres10.1016/S0008-6223(99)00266-3 ↗
18. Fracture mechanics analysis of the fibre fragmentation test10.1177/002199839502900703 ↗
19. Microbond and fragmentation tests for the fiber/matrix interfacial shear strength
20. Investigation of the influence of acidic and basic surface groups on carbon fibres on the interfacial shear strength in an epoxy matrix by means of single-fibre pull-out test10.1016/S0266-3538(00)00239-6 ↗
21. Fracture mechanisms during fiber pull-out for carbon-fiber-reinforced thermosetting composites10.1016/0266-3538(93)90148-A ↗
22. Pull-out and failure of a fiber bundle in a carbon fiber reinforced carbon matrix composite10.1016/S0008-6223(00)00067-1 ↗
23. Characterizing the fiber/matrix interface of carbon fiber-reinforced composites using a single fiber pull-out test10.1016/0010-4361(90)90436-Z ↗
24. The use of a single-fibre pull-out test to investigate the influence of acidic and basic surface groups on carbon fibres on the adhesion to poly (phenylene sulfide) and matrix-morphology-dependent fracture behaviour10.1016/S0266-3538(01)00069-0 ↗
25. Application of the microbond technique: effects of hydrothermal exposure on carbon-fiber/epoxy interfaces10.1016/0266-3538(93)90163-B ↗
26. Deformation micromechanics in model carbon fiber reinforced composites. Part II. The microbond test10.1177/004051759706700204 ↗
27. Solution microbond method for determination of the shear strength of a fiber/thermoplastic resin interface10.1002/app.1992.070440321 ↗