journal article·2023-07

To measure in-plane conductivity of Nafion membrane with general electrochemical approach

Jian-Wei Guo, Jian-Long Wang, Shang-kun Jiang, Li Li

Publisher page

Abstract

It is important to measure in-plane conductivity of Nafion membrane for fuel cell, but this target is generally inhibited by measuring system with heterogeneous interfaces and immature electrochemical measurements. This paper simply used water media to establish stable measuring system with metal electrode and Nafion membrane, representing system as equivalent circuit. Our equivalent circuit was validated by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements, also clarified connection and difference in two measurements. This electrochemistry breakthrough helps realize measuring system completely and reliably even under successive temperature cycles, providing circuit elements for kinetic analysis in contact resistance, in-plane conductivity, inactive and active proton. We also clarified that the inactive and active proton shift can dictate low frequency inductance, which is an important sign for active and stable operation in fuel cell, secondary battery and materials. All these results can induce enormous progress in multi-disciplines, making our work have great significance and broad impact for future studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. To drive Fe-based catalyst towards complete application in proton exchange membrane fuel cells (PEMFCs)10.1016/j.electacta.2017.01.123 ↗
2. Synthesis of Fe nanoparticles on polyaniline covered carbon nanotubes for oxygen reduction reaction10.1016/j.jpowsour.2014.08.124 ↗
3. Nafion 117 stability under conditions of PEM water electrolysis at elevated temperature and pressure10.1016/j.ijhydene.2015.11.102 ↗
4. Test system for through-plane conductivity measurements of hydrogen proton exchange membranes10.1016/S1452-3981(23)06733-0 ↗
5. Proton conductivity of composite polyelectrolyte membranes with metal-organic frameworks for fuel cell applications
6. Studies on the electrochemical behavior of polymer electrolyte membrane fuel cell(PEMFC) by AC impedance method
7. The pilot application of Electrochemical Impedance specttroscopy on dynamic proton exchange membrane fuel cell
8. A study on structural property of ionomer as a model for catalyst layer: relationship between thickness and proton conduction for ionomer thin filmon different substrate10.1149/05002.0993ecst ↗
9. Negative resistance for methanol electro-oxidation on platinum/carbon (Pt/C) catalyst investigated by an electrochemical impedance spectroscopy10.1016/j.jpowsour.2014.11.131 ↗
10. On the proton conductivity of Nafion–Faujasite composite membranes for low temperature direct methanol fuel cells10.1016/j.jpowsour.2011.07.009 ↗
11. Anisotropic conductivity over in-plane and thickness directions in nafion-11710.1149/1.2357727 ↗
12. A critical investigation of the effect of hygrothermal cycling on hydration and in-plane/through-plane proton conductivity of Nafion 117 at medium temperature (70-130 C)10.1016/j.jpowsour.2013.02.009 ↗
13. Analysis of EIS technique and nafion 117 conductivity as a function of temperature and relative humidity10.1149/2.104203jes ↗
14. Characterizing through-plane and in-plane ionic conductivity of polymer electrolyte membranes10.1149/1.3635668 ↗
15. Through-plane proton transport resistance of membrane and ohmic resistance distribution in fuel cells10.1149/1.3240877 ↗
16. Measuring the proton conductivity of ion-exchange membranes using electrochemical impedance spectroscopy and through-plane cell10.1021/jp409675z ↗
17. A novel method for humidity-dependent through-plane impedance measurement for proton conducting polymer membranes10.3390/membranes9050062 ↗
18. Investigation of the through-plane impedance technique for evaluation of anisotropy of proton conducting polymer membranes10.1016/j.jelechem.2008.05.017 ↗
19. Test system for through-plane conductivity measurements of hydrogen proton exchange membranes10.1016/S1452-3981(23)06733-0 ↗
20. Fuel cell membrane characterizations10.1080/15583724.2015.1011275 ↗
21. Properties of Nafion® NR-211 membranes for PEMFCs10.1016/j.memsci.2010.03.025 ↗
22. The influence of water channel geometry and proton mobility on the conductivity of Nafion10.1016/j.electacta.2016.08.010 ↗
23. Surface enriched sulfonic acid ionic clusters of nafion nanofibers as long-range interconnected ionic nanochannels for anisotropic proton transportation: phenomenon and molecular mechanism
24. More on nafion conductivity decay at temperatures higher than 80°C: preparation and first characterization of in-plane oriented layered morphologies10.1021/ie303628c ↗
25. Proton conductivily of nafion 117 as measured by a four-electrode AC impedance method10.1149/1.1836625 ↗
26. Structure-property relationships at Nafion thin-film interfaces: thickness effects on hydration and anisotropic ion transport10.1016/j.nanoen.2018.01.008 ↗
27. Through-plane conductivity of anion exchange membranes at sub-freezing temperatures—hydroxide vs (Bi-)Carbonate ions10.1149/1945-7111/ab8cdf ↗
28. The genuine ac-to-dc proton conductivity crossover of nafion and polymer dielectric relaxations as a fuel cell polarization loss10.1016/j.jelechem.2020.114357 ↗
29. The importance of electrical impedance spectroscopy and equivalent circuit analysis on nanoscale molecular electronic devices10.1002/adfm.202109956 ↗
30. Performance modeling of the ballard mark IV solid polymer electrolyte fuel cell.I. Mechanistic model development10.1149/1.2043866 ↗
31. Characterization and evaluation of Nafion HP JP as proton exchange membrane: transport properties, nanostructure, morphology, and cell performance10.1007/s10008-019-04366-7 ↗
32. Impedance response of the proton exchange membrane in polymer electrolyte fuel cells10.1149/1.2929823 ↗
33. Physical modeling of polymer-electrolyte membrane fuel cells: understanding water management and impedance spectra10.1016/j.jpowsour.2018.04.070 ↗
34. Experimental and numerical investigation of the low-frequency inductive features in differential PEMFCs: ionomer humidification and platinum oxide effects
35. Low frequency inductive loop in EIS measurements of an open-cathode polymer electrolyte fuel cell stack. Impedance of water vapour diffusion in the cathode catalyst layer
36. An impedance model for analysis of EIS of polymer electrolyte fuel cells under platinum oxidation and hydrogen peroxide formation in the cathode10.1016/j.jelechem.2016.02.046 ↗
37. Impedance study on estimating electrochemical mechanisms in a polymer electrolyte fuel cell during gradual water accumulation10.1002/fuce.201800124 ↗
38. Meyer, Q ; Liu, SY ; Ching, KR; et al. Operando monitoring of the evolution of triple-phase boundaries in proton exchange membrane fuel cells. J. Power Sources. DOI10.1016/j.jpowsour.2022.232539.
39. Investigations on the interfacial capacitance and the diffusion boundary layer thickness of ion exchange membrane using electrochemical impedance spectroscopy10.1016/j.memsci.2015.12.007 ↗
40. Impact of heating on the structure of perfluorinated polymer electrolyte membranes: a positron annihilation study10.1002/macp.201000693 ↗
41. Cao · 2002
42. Effects of ion exchange on the free volume and oxygen permeation in nafion for fuel cells10.1021/jp808960w ↗
43. Positron annihilation study of ion-exchanged forms of Nafion® membrane10.1002/pssc.200982061 ↗
44. Microstructure characterization of Nafion® HP JP as a proton exchange membrane for fuel cell: positron annihilation study10.12693/APhysPolA.132.1543 ↗
45. On the diffusion coefficient of water in polymer electrolyte membranes10.1149/05002.0979ecst ↗
46. Thickness dependence of proton-exchange-membrane properties10.1149/1945-7111/ac2973 ↗
47. The effect of membrane properties on performance and transports inside polymer electrolyte membrane fuel cells10.1149/2.0081813jes ↗
48. How the morphology of nafion-based membranes affects proton transport10.3390/polym13030359 ↗
49. Effect of interface on surface morphology and proton conduction of polymer electrolyte thin films10.1039/c3cp51136g ↗
50. Beneficial use of rotatable-spacer side-chains in alkaline anion exchange membranes for fuel cells10.1039/C8EE02071J ↗
51. Dual-cation comb-shaped anion exchange membranes: structure, morphology and properties10.1016/j.memsci.2016.05.058 ↗
52. Properties of Nafion® NR-211 membranes for PEMFCs10.1016/j.memsci.2010.03.025 ↗
53. The importance of electrical impedance spectroscopy and equivalent circuit analysis on nanoscale molecular electronic devices10.1002/adfm.202109956 ↗
54. Experimental diagnostics and modeling of inductive phenomena at low frequencies in impedance spectra of proton exchange membrane fuel cells10.1016/j.jpowsour.2017.08.087 ↗
55. A frequency-domain approach to dynamical modeling of electrochemical power sources10.1016/S0013-4686(02)00091-9 ↗
56. Low-frequency inductive loop and its origin in the impedance spectrum of a graphite anode10.1149/1945-7111/aca364 ↗
57. Effect of Ti addition on the microstructure and corrosion resistance of AlCrCuFeNiNb0.2 high-entropy alloy10.1007/s11837-022-05620-6 ↗
58. An EIS investigation into the influence of HF concentration on porous silicon formation10.1149/2.089403jes ↗
59. The inductive effect of montmorillonite/polyether sulfone membrane during the ion diffusion process10.1016/j.clay.2021.106002 ↗