Effects of boron oxide addition on electrical properties of yttrium-doped bismuth-based zinc oxide varistors
Source abstract
Abstract
Abstract The optimal amount of B2O3 (0.75 mol%) drastically improved the electrical properties of Y-doped varistors, reducing the leakage current to 0.8 μA/cm2 while maintaining exceptionally long-term stability against DC electrical degradation and a varistor voltage around 900 V/mm. Boron ions were found with Bi ions in Y-compounds, which contributed to formation of a Bi-rich glass phase containing B at grain boundaries when the B2O3 content was above 0.75 mol%. The change in microstructure affected the donor density and barrier structure, leading to a change in electrical properties. The Bi-rich phase first reduced the Co concentration in the ZnO grains, thereby decreasing the donor density ND. When large amount of B2O3 was added, some Co remained in ZnO grains, causing an increase in ND. A new analytical method using the differential resistance RD for the nonlinear voltage–current density relation was proposed to clarify the effects of B2O3 addition. This method separates the three differential resistance RDi values (i = 1, 2, 3) and was used to analyze the corresponding conduction process in forward-biased region I, reverse-biased region III, and interface region II of the energy band. The RD1 and RD2 values exhibited junction diode-like behavior in regions I and III. The value of RD2 that correlated with αasMAX and the long-term stability of the varistor and RD3 may be related to region II.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Nonohmic properties of zinc oxide ceramics10.1143/JJAP.10.736 ↗
2. Zinc oxide varistors10.1109/57.44606 ↗
3. Application of zinc oxide varistors10.1111/j.1151-2916.1990.tb05232.x ↗
4. Advances in ZnO-Bi2O3 based varistors10.1007/s10854-015-3093-1 ↗
5. Ultra high voltage transmission in China: developments, current status and future prospects10.1109/JPROC.2009.2013613 ↗
6. He · 2019 · 1
7. Effect of thermal annealing on electrical degradation characteristics of Sb-Bi-Mn-Co-added ZnO varistors10.1016/j.jeurceramsoc.2009.06.006 ↗
8. Fabrication and electrical characteristics of flash-sintered SiO2-doped ZnO-Bi2O3-MnO2 varistors10.1007/s40145-020-0404-7 ↗
9. Microstructural and electrical characteristics of Y2O3-doped ZnO-Bi2O3-based varistor ceramics10.1016/S0955-2219(01)00134-0 ↗
10. The characteristics of ZnO–Bi2O3-based varistor ceramics doped with Y2O3 and varying amounts of Sb2O310.1016/S0955-2219(03)00412-6 ↗
11. Grain-boundary and thermally stimulated current characteristics of Y2O3-doped ZnO varistor10.1111/jace.12517 ↗
12. Effects of doping Y2O3 on the microstructure and electrical properties of ZnO-Bi2O3 based varistor ceramics10.1007/s10832-021-00238-7 ↗
13. Effects of Zr and Y addition on the electrical degradation characteristics of ZnO varistors10.4028/www.scientific.net/KEM.445.237 ↗
14. Effects of addition of chromium and/or nickel oxides on the electrical characteristics of yttrium oxide-doped high-voltage zinc oxide varistors10.1016/j.jeurceramsoc.2021.03.042 ↗
15. Indium tailors the leakage current and voltage gradient of multiple dopant-based ZnO varistors10.1016/j.ceramint.2016.12.021 ↗
16. Tailoring low leakage current and high nonlinear coefficient of a Y-doped ZnO varistor by indium doping10.1016/j.matlet.2016.10.100 ↗
17. Electrical properties of ZnO varistor ceramics modified by rare earth-yttrium and gallium dopants10.1016/j.matlet.2018.08.089 ↗
18. Effect of co-doping Y2O3–La2O3 on microstructure and electrical properties of ZnO-based varistor ceramics prepared from nanosize ZnO powder10.1007/s10854-017-8242-2 ↗
19. Electrical degradation of double-Schottky barrier in ZnO varistors10.1063/1.4944485 ↗
20. Zinc interstitial as a universal microscopic origin for the electrical degradation of ZnO-based varistors under the combined DC and temperature condition10.1016/j.jeurceramsoc.2017.04.039 ↗
21. Grain and grain boundary conduction in zinc oxide varistors before and after DC degradation10.1016/0955-2219(93)90114-7 ↗
22. The barrier height formation in ZnO varistors10.1016/0955-2219(95)00025-P ↗
23. Degradation of potential barriers in ZnO-based chip varistors due to electrostatic discharge10.1063/1.4742987 ↗
24. Different degradation processes in ZnO varistors10.1016/0272-8842(95)00051-8 ↗
25. Desorption thermal degradation model of zinc oxide ceramics10.1016/j.jeurceramsoc.2003.12.004 ↗
26. Destruction mechanism of ZnO varistors due to high currents10.1063/1.333836 ↗
27. The effect of bismuth oxide polymorph forms on degradation processes in ZnO varistors10.1016/j.ceramint.2013.04.006 ↗
28. Effect of heat treatments on the wetting behavior of bismuth-rich intergranular phases in ZnO:Bi:Co varistors10.1111/j.1151-2916.1989.tb06188.x ↗
29. Mild degradation processes in ZnO-based varistors: the role of Zn vacancies
30. Relation between grain boundary structure and electrical degradation in zinc oxide varistors10.1111/j.1551-2916.2012.05212.x ↗
31. Electrical barriers in the ZnO varistor grain boundaries
32. Effect of thermal annealing on electrical degradation characteristics of Sb-Bi-Mn-Co-added ZnO varistors10.1016/j.jeurceramsoc.2009.06.006 ↗
33. Effects of annealing on the grain boundary potential barrier of ZnO varistor10.1007/BF02402992 ↗
34. The effect of Bi2O3/SiO2 molar ratio and annealing on the dc degradation of ZnO varistors10.1111/j.1551-2916.2011.04654.x ↗
35. Influence of B2O3 additives on microstructure and electrical properties of ZnO-Bi2O3-Sb2O3-based varistors10.1016/j.jallcom.2010.10.074 ↗
36. Improvement in nonlinear properties and electrical stability of ZnO varistors with B2O3 additives by nano-coating method10.1111/j.1551-2916.2011.04900.x ↗
37. Low-temperature sintering and electrical properties of ZnO-Bi2O3-TiO2-Co2O3-MnCO3-based varistor with Bi2O3-B2O3 frit for multilayer chip varistor applications10.1111/j.1551-2916.2010.03866.x ↗
38. Properties of ZnO varistor ceramics co-doped with B2O3 and Al2O3
39. Characterization of interface states in ZnO varistors using isothermal capacitance transient spectroscopy10.2109/jcersj.100.1239 ↗
40. Evaluation of factors in the degradation of ZnO varistor10.1541/ieejpes1990.119.6_652 ↗
41. Capacitance-vs-voltage characteristics of ZnO varistors10.1063/1.326411 ↗
42. Gas-sensing selectivity of n-ZnO/p-Co3O4 sensors for homogeneous reducing gas10.1016/j.jpcs.2020.109864 ↗
43. Discriminable sensing response behavior to homogeneous gases based on n-ZnO/p-NiO composites10.3390/nano10040785 ↗
44. Carrier transport through grain boundaries in semiconductors10.1103/PhysRevB.33.3952 ↗
45. The theory of p-n junctions in semiconductors and p-n junction transistors10.1002/j.1538-7305.1949.tb03645.x ↗
46. Conduction mechanism of non-Ohmic zinc oxide ceramics10.1063/1.325139 ↗