Macrosegregation and channel segregation formation of faceted mushy zone in solidification of Sn–Ni hypereutectic alloy in a temperature gradient
Source abstract
Abstract
Abstract Numerous investigations on the macrosegregation and channel segregation formation have been reported during eutectic solidification. However, the current analyses are focused on the non-faceted dendritic mushy zone while the faceted mushy zone during solidification has not been reported before. In this work, the macrosegretion and channel segregation formation are studied in directional solidification of Sn-15at.%Ni hypereutectic alloy where the solidified Ni3Sn4 phase exhibits faceted lath-type growth morphology. Similar to previous works on non-faceted mushy zone, more channels can be witnessed in the (Liquid + Ni3Sn4) mushy zone at lower growth velocities. More obvious macrosegregation can be formed in samples at lower growth velocities where the thermosolutal convection is more severe. However, distinct from previous reports, the effective solute distribution coefficient is not constant in the faceted mushy zone of this alloy. Besides, the experimental results demonstrates that the convection can reduce the interspacing of Ni3Sn4 phase during directional solidification. In addition, the thermosolutal convection has more significant influence on the interspacing of Ni3Sn4 phase than the solutal buildup at the tip of Ni3Sn4 phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A study of the dependence on the Co and Ni proportions of the oxidation at elevated temperature of TaC-strengthened {Ni and Co}-based cast superalloys10.1016/j.matchemphys.2020.123088 ↗
2. The Directional solidification of Pb-Sn alloys10.1023/A:1004829413966 ↗
3. Atomistic modelling of the γ-TiAl/α2-Ti3Al interfacial properties affected by solutes10.1016/j.matchemphys.2020.123434 ↗
4. Macrosegregation during dendritic arrayed growth of hypoeutectic Pb-Sn alloys: influence of primary arm spacing and mushy zone length10.1007/BF02649872 ↗
5. A new mechanism for freckle initiation based on microstructural level simulation10.1016/j.actamat.2012.04.043 ↗
6. 3-D microstructural model of freckle formation validated using in situ experiments10.1016/j.actamat.2014.07.002 ↗
7. Fluid flow and defect formation in the three-dimensional dendritic structure of nickel-based single crystals10.1007/s11661-011-0823-8 ↗
8. The breakdown of single-crystal solidification in high refractory nickel-Base alloys10.1007/BF02649777 ↗
9. Overview of geometric effects on coarsening of mushy zones10.1007/BF02648946 ↗
10. Experimental study of polycrystal growth from an advecting supersaturated fluid10.1111/j.1468-8123.2006.00142.x ↗
11. Impact of hydrodynamics on growth and morphology of faceted crystals10.1016/j.jcrysgro.2020.125667 ↗
12. On kinetics and hydrodynamics related to the growth of faceted crysrals10.1016/0022-0248(89)90064-X ↗
13. Influence of coarsening on dendrite arm spacing of aluminum-copper alloys
14. On secondary dendrite arm coarsening in peritectic solidification10.1016/j.msea.2004.07.032 ↗
15. Permeability of interdendritic channels10.1016/j.msea.2004.08.048 ↗
16. Numerical model to predict the position, amount and size of microporosity formation in Al–Cu alloys by dissolved gas and solidification shrinkage10.1016/j.msea.2004.03.009 ↗
17. Solidification segregation in ruthenium-containing nickel-base superalloys10.1007/s11661-006-0137-4 ↗
18. Freckle formation and freckle criterion in superalloy castings10.1007/s11663-000-0117-9 ↗
19. Rayleigh number criterion for formation of A-Segregates in steel castings and ingots10.1007/s11661-013-1761-4 ↗
20. Channel formation in Pb-Sn, Pb-Sb, and Pb-Sn-Sb alloy ingots and comparison with the system NH4Cl-H2O10.1007/BF02645156 ↗
21. Freckle formation in a solidifying binary alloy10.1023/A:1004335317650 ↗
22. Freckle criteria for the upward directional solidification of alloys10.1007/s11661-001-0271-y ↗
23. The experimental characterization and numerical simulation of A-segregates in 27SiMn steel10.1007/s11661-017-4006-0 ↗
24. On the length-scale and location of channel nucleation in directional solidification10.1016/S0921-5093(02)00465-3 ↗
25. Convection and channel formation in solidifying Pb-Sn alloys
26. Evaluation of a Rayleigh-number-based freckle criterion for Pb-Sn alloys and Ni-base superalloys10.1007/s11661-003-0264-0 ↗
27. A mushy-zone Rayleigh number to describe macrosegregation and channel segregate formation during directional solidification of metallic alloys10.1007/s11661-004-0240-3 ↗
28. On the formulation of a freckling criterion for Ni-based superalloy vacuum arc remelting ingots10.1007/s11661-010-0331-2 ↗
29. Development of a freckle predictor via Rayleigh number method for single-crystal nickel-base superalloy castings10.1007/s11661-000-0199-7 ↗
30. Modeling fluid flow in three-dimensional single crystal dendritic structures10.1016/j.actamat.2010.01.014 ↗
31. Effect of the forced flow on the permeability of dendritic networks: a study using phase-field-lattice Boltzmann method10.1016/j.ijheatmasstransfer.2018.11.036 ↗
32. An anisotropic lattice Boltzmann-phase field scheme for numerical simulations of dendritic growth with melt convection10.1016/j.ijheatmasstransfer.2018.12.095 ↗
33. Permeability of dual structured hypoeutectic aluminum alloys10.1016/j.actamat.2011.03.074 ↗
34. Numerical determination of liquid flow permeabilities for equiaxed dendritic structures10.1016/S1359-6454(02)00014-9 ↗
35. Image-based modelling for fluid flow and permeability prediction within continuously-evolving mushy zone during melting and solidification10.1016/j.ijheatmasstransfer.2019.119000 ↗
36. Jackson · 1958
37. Flemings · 1974
38. Kurz · 1989
39. Dynamical studies of dendritic growth10.1016/0001-6160(85)90198-1 ↗
40. Anisotropic thermal expansion of Ni3Sn410.1016/j.intermet.2017.08.002 ↗
41. Interfacial reaction of Ni3Sn4 intermetallic compound in Ni/SnAg solder/Ni system under thermomigration10.1016/j.jallcom.2016.03.020 ↗
42. Micromechanical behavior of single crystalline Ni3Sn4 in micro joints for chip-stacking applications10.1016/j.msea.2017.01.004 ↗
43. Growth mechanism of Ni3Sn4 in a Sn/Ni liquid/solid interfacial reaction10.1016/j.actamat.2009.07.021 ↗
44. Lithium storage properties of nanocrystalline Ni3Sn4 alloys prepared by mechanical alloying10.1016/S0378-7753(02)00047-2 ↗
45. Microsegregation of peritectic systems in a temperature gradient: analysis in directionally solidified Sn–36at.%Ni peritectic alloy10.1016/j.ijheatmasstransfer.2015.11.005 ↗
46. A new investigation of the system Ni-Sn10.1016/j.intermet.2006.10.045 ↗
47. Comparison of channel segregation formation in model alloys and steels via numerical simulations10.1007/s11661-016-3417-7 ↗
48. Solute redistribution during dendritic solidification
49. Hunt · 1979 · 3
50. Dendrite growth at the limit of stability: tip radius and spacing10.1016/0001-6160(81)90082-1 ↗
51. Numerical modeling of cellular/dendritic array spacing and structure predictions10.1007/BF02648950 ↗