journal article·2020-09

Shrinking tension-compression asymmetry of Au nanowires by designed nanotwin boundaries

Jiapeng Sun, Bingqian Xu, Zhenquan Yang, Jing Han, Xiaoru Zhuo, Huan Liu, Yuna Wu, Aibin Ma, Guosong Wu

Publisher page

Abstract

Abstract Atomistic simulation is applied to investigate the tension-compression (T-C) asymmetry of the nanotwinned Au nanowires (NTWs) with the different twin orientations in this paper. The result demonstrates that the T-C asymmetry is not only represented by the different yield stress under tensile and compressive load, namely yield asymmetry, but also highlighted by the different strengthening effect of twin boundaries, namely strengthening asymmetry. The yield asymmetry in the NTWs becomes weaker than that in their single-crystal counterparts and highly twin orientation-dependent. In more details, the compressive yield stress is larger than the tensile yield stress when the twin orientation angle is 0°, 19.47° and 90°, while the opposite is true as the twin orientation angle changes to 54.74°. The strengthening effect is much obvious under tensile load in the NTW with a twin orientation angle of 0°, while no significant difference is found in the NTW with a twin orientation angle of 90°. In contrast, the NTWs with a twin orientation angle of 19.47° and 54.74° exhibit great reduced tensile and compressive strength. This work not only deepens our understanding of the mechanical behavior of the nanotwinned metal but also provides a new strategy to control mechanical behavior via nanotwin boundaries design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Nanoelectronics from the bottom up10.1038/nmat2028 ↗
2. Length-dependent mechanical properties of gold nanowires10.1063/1.4768284 ↗
3. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
4. Fundamental differences in mechanical behavior between two types of crystals at the nanoscale10.1103/PhysRevLett.100.155502 ↗
5. Near-Ideal strength in gold nanowires achieved through microstructural design10.1021/nn900668p ↗
6. Enabling ultrahigh plastic flow and work hardening in twinned gold nanowires10.1021/nl803553b ↗
7. Yield strength asymmetry in metal nanowires10.1021/nl0489992 ↗
8. Tension-compression asymmetry in homogeneous dislocation nucleation in single-crystal copper10.1063/1.2715137 ↗
9. Tension–compression asymmetry in homogeneous dislocation nucleation stress of single-crystals Cu, Au, Ni and Ni3Al10.1016/j.msea.2014.03.018 ↗
10. A loading-dependent model of critical resolved shear stress10.1016/j.ijplas.2018.03.011 ↗
11. Deformation mechanisms in nanotwinned metal nanopillars10.1038/nnano.2012.116 ↗
12. The fracture behavior of twinned Cu nanowires: a molecular dynamics simulation10.1016/j.msea.2015.03.034 ↗
13. Near-ideal theoretical strength in gold nanowires containing angstrom scale twins10.1038/ncomms2768 ↗
14. Rebuilding the strain hardening at a large strain in twinned Au nanowires10.3390/nano8100848 ↗
15. Dislocation nucleation and defect structure during surface indentation10.1103/PhysRevB.58.11085 ↗
16. On fitting a gold embedded atom method potential using the force matching method E-5837-2011 A-3427-2009
17. Structural characterization of deformed crystals by analysis of common atomic neighborhood10.1016/j.cpc.2007.05.018 ↗
18. Surface step effects on nanoindentation10.1103/PhysRevLett.87.165507 ↗
19. Nonlinear elastic response of single-crystal Cu under uniaxial loading by molecular dynamics study10.1016/j.matlet.2018.05.094 ↗
20. Crystal orientation effect on dislocation nucleation and multiplication in FCC single-crystal under uniaxial loading10.1016/j.ijplas.2013.04.010 ↗
21. Size effect and deformation mechanism in twinned copper nanowires
22. Plastic deformation mechanism in nano-twinned metals: insight from molecular dynamics and mechanistic modeling10.1016/j.scriptamat.2012.01.031 ↗
23. Dislocation nucleation governed softening and maximum strength in nano-twinned metals10.1038/nature08929 ↗
24. Repulsive force vs. Source number: competing mechanisms in the yield of twinned gold nanowires of finite length10.1016/j.actamat.2010.12.031 ↗
25. Deformation mechanisms in nanotwinned copper by molecular dynamics simulation10.1016/j.msea.2016.12.061 ↗
26. Direct observation of dislocations originating from perfect twin boundaries10.1016/j.scriptamat.2011.06.008 ↗
27. Effects of twin orientation and spacing on the mechanical properties of Cu nanowires
28. Effects of twin orientation and spacing on the mechanical properties of Cu nanowires