Microstructure and oxidation resistance of Al50(Fe–Cr)(50-)(SiC) composite coated low-carbon steel prepared by mechanical milling
Source abstract
Abstract
In this study, the influence of silicon carbide (SiC) content on microstructure and oxidation behavior of the Al50(Fe–Cr)(50-x)(SiC)x composite coating on low-carbon steel was studied for the first time. The correlation between the microstructure and oxidation behavior of the Al50(Fe–Cr)(50-x)(SiC)x composite coating at different SiC content was determined using X-ray diffraction (XRD), optical microscope, and scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). The result confirms that the phase and microstructure of the coating is a composite structure consisting of highly densified and porous regions. The addition of SiC (5 at.%) on the composite coating improves the microstructure quality, but increasing SiC more than 5 at.% causes the increment of micro-porosity. The high-temperature cyclic oxidation results at 800 °C for 200 h revealed that all composite coating followed a parabolic rate law. The best oxidation resistance is shown by the addition of 5 at.% SiC on the Al50(Fe–Cr)(50-x)(SiC)x composite coating. It indicated a lower Kp of 0.84 × 10−3 mg2/cm4.s than the other samples. Moreover, the protective oxides of Al2O3 were formed on the composite coating surface. This oxide scale is dense and fully adhered to the coating, thus improving oxidation resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Characterization and properties of plasma electrolytic oxidation coating on low carbon steel fabricated from aluminate electrolyte10.1016/j.vacuum.2017.08.003 ↗
2. Oxidation behavior of aluminide coatings on carbon steel with and without electrodeposited Ni-CeO2 film by low-temperature pack cementation10.1016/j.vacuum.2011.06.009 ↗
3. A high-silicon anti-oxidation coating for carbon steel at high temperature10.1016/j.surfcoat.2016.12.084 ↗
4. Alloyability of warm formed FeCrAl powder compacts10.1016/j.mtcomm.2015.05.003 ↗
5. Tribological and corrosion behavior of flame sprayed Al–10wt% Ti3SiC2 composite coating on carbon steel10.1016/j.surfcoat.2018.10.087 ↗
6. Investigation of Cr-Al composite coatings fabricated on pure Ti substrate via mechanical alloying method: effects of Cr-Al ratio and milling time on coating, and oxidation behavior of coating10.1016/j.jallcom.2015.11.094 ↗
7. Study on Fe-Al-Si in situ composite coating fabricated by laser cladding10.1016/j.apsusc.2011.09.057 ↗
8. Slurry spray coating of carbon steel for use in oxidizing and humid environments10.1016/j.ceramint.2018.02.017 ↗
9. Preparation and properties of ceramic coating on Q235 carbon steel by plasma electrolytic oxidation10.1016/j.cap.2008.12.004 ↗
10. Mechanically assisted electroplating of Ni-P coatings on carbon steel10.1016/j.surfcoat.2008.06.183 ↗
11. Growth behavior and properties of Zn–Al pack cementation coatings on carbon steels10.1016/j.surfcoat.2016.02.040 ↗
12. Formation of chromium nitride coatings on carbon steels by pack cementation process10.1016/j.surfcoat.2016.10.047 ↗
13. Corrosion resistance and characterization of metallic coatings deposited by thermal spray on carbon steel10.1016/j.matdes.2012.05.008 ↗
14. Corrosion protection of carbon steel by alumina-titania ceramic coatings used for industrial applications10.1016/j.ceramint.2018.08.273 ↗
15. Surface microstructure and high temperature corrosion resistance of arc-sprayed FeCrAl coating irradiated by high current pulsed electron beam10.1016/j.nimb.2013.07.015 ↗
16. Microstructure and interface-adhesion of thermally sprayed continuous gradient elastic modulus FeCrAl-ceramic coatings10.1016/j.ceramint.2019.11.048 ↗
17. Properties of WC-FeCrAl coatings manufactured by different high velocity thermal spray processes10.1016/j.surfcoat.2014.03.021 ↗
18. Microstructure, oxidation and corrosion properties of FeCrAl coatings with low Al content prepared by magnetron sputtering for accident tolerant fuel cladding10.1016/j.jnucmat.2021.152966 ↗
19. Mechanical alloying-assisted coating of Fe–Al powders on steel substrate10.7454/mst.v24i3.3690 ↗
20. Plasma sprayed Al2O3/FeCrAl composite coatings for electromagnetic wave absorption application10.1016/j.apsusc.2011.10.119 ↗
21. Mechanistic aspects of electrodeposition of Ni-Co-SiC compositenano-coating on carbon steel10.1016/j.electacta.2013.07.106 ↗
22. Polymer-derived SiC/C/Al environmental barrier coatings on carbon steel10.1080/17436753.2020.1827671 ↗
23. Fabrication of Ni60–SiC coating on carbon steel for improving friction, corrosion properties10.1080/02670836.2016.1224216 ↗
24. Preparation of Al-Cr-Fe coatings by heat treatment of electrodeposited Cr/Al composite coatings10.1016/j.phpro.2013.11.033 ↗
25. Microstructural stability of Fe-Cr-Al alloys at 450-550 °C10.1016/j.jnucmat.2014.11.101 ↗
26. Processability evaluation of a Mo-containing FeCrAl alloy for seamless thin-wall tube fabrication10.1016/j.msea.2017.06.036 ↗
27. Fabrication of poly(alkyl-aniline)-SiC/zinc bilayer coatings and evaluation of their corrosion resistance properties10.1016/j.colsurfa.2018.05.009 ↗
28. Fabrication and microstructure of liquid sintered porous SiC ceramics through spark plasma sintering10.1016/j.jallcom.2018.03.122 ↗
29. Fabrication of a Ni/SiC composite coating on steel surface with excellent corrosion inhibition performance10.1016/j.jmatprotec.2020.116987 ↗
30. Rare-earth oxide additives for the sintering of silicon carbide10.1016/j.diamond.2013.07.003 ↗
31. Rare-earth nitrate additives for the sintering of silicon carbide10.1016/j.jeurceramsoc.2013.05.017 ↗
32. Preparation of ferrosilicon-aluminium coating using a mechanical alloying technique: study of thermal annealing on their structural characteristics10.1016/j.surfcoat.2017.12.041 ↗
33. Microstructure and oxidation behavior of an Al–Ni–Cr–Cu–MoO3–SiO2 composite coating on low-carbon steel10.1016/j.matchemphys.2021.124250 ↗
34. One component metal sintering additive for β-SiC based on thermodynamic calculation and experimental observations10.1016/j.materresbull.2011.04.014 ↗
35. Microstructures and properties of TiCp/Al coating synthesized on Ti–6Al–4V alloy substrate using mechanical alloying method10.1016/j.jallcom.2019.152223 ↗
36. Microstructures evolution, formation mechanisms and properties of Sicp/Al composite coatings on Ti-6Al-4v substrate via mechanical alloying method
37. Oxidation behavior of Cr-AlSi12 composite coatings on Ti-6Al-4V alloy substrate fabricated via high-energy mechanical alloying method10.1016/j.surfcoat.2019.03.070 ↗
38. Microstructures and oxidation behavior of Al-CrMnFeCoMoW composite coatings on Ti-6Al-4V alloy substrate via high-energy mechanical alloying method10.1016/j.jallcom.2018.11.266 ↗
39. In situ coating of low carbon steel with Ni[sbnd]Al[sbnd]Fe powder mixture via mechanical alloying10.1016/j.surfcoat.2017.02.046 ↗
40. Preparation of Ti-Cr and Ti-Cu flame-retardant coatings on Ti-6Al-4V using a high-energy mechanical alloying method: a preliminary research10.1016/j.matdes.2011.09.017 ↗
41. Formation of nanostructured NiAl coating on carbon steel by using mechanical alloying10.1016/j.apsusc.2012.09.151 ↗
42. Fabrication of Ti-Al coatings by mechanical alloying method10.1016/j.surfcoat.2006.06.044 ↗
43. Formation of Fe-Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique10.1016/j.powtec.2013.07.002 ↗
44. Effect of annealing temperature on the oxidation behavior of ferrosilicon-aluminum-coated low carbon steel by mechanical alloying10.1016/j.jallcom.2019.153493 ↗
45. Kinetics of liquid sintering10.1016/0025-5416(88)90499-5 ↗
46. Modeling grain growth dependence on the liquid content in liquid-phase-sintered materials10.1007/s11661-998-0213-z ↗
47. Liquid phase sintering of tough coated hard particles10.1016/j.ijrmhm.2005.05.018 ↗
48. Structural characteristics and high-temperature oxidation behavior of porous Fe-40 at.%Al alloy10.1007/s10853-009-3669-3 ↗