The formation of TiO2 nanoporous/nanotubular structure on NiTi substrate with amorphous, nanocrystalline and microcrystalline structures
Source abstract
Abstract
Abstract In the present study, the formation of TiO2 nanotube arrays on different NiTi substrates with different structures and crystallite sizes were investigated. In this regards, the anodizing process has been carried out in an organic bath (ethylene glycol+ 0.5 wt% NH4F+ 3 wt% water) under applied voltages of 10–90 V on as prepared microcrystalline, amorphous and nanocrystalline NiTi substrates. Based on results, the optimum anodizing voltage for the successful achievement of the nanotube arrays on microcrystalline NiTi substrate with the average grain size of 50 μm was estimated about 30–45 V. Increasing the applied voltage from 30 to 45 V resulted in an increase in the nanotubes diameter from 50 to 70 nm. The formation of nanotubes array was impossible on NiTi substrate with amorphous structure and only porous TiO2 formed on that. The response of nanocrystalline NiTi substrates against anodizing was in direct relation with crystallite size and changed from nanoporous to nanotubular with increasing the crystallite sizes from 40 to 350 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Conducting polymers and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Surface treatments for biomedical applications10.1016/j.jallcom.2006.08.020 ↗
2. The corrosion resistance of Nitinol alloy in simulated physiological solutions: Part 1: the effect of surface preparation10.1016/j.msec.2011.11.007 ↗
3. Surface conditions of Nitinol wires, tubing, and as-cast alloys: the effect of chemical etching, aging in boiling water, and heat treatment10.1002/jbm.b.10001 ↗
4. Formation of self-organized titania nano-tubes by dealloying and anodic oxidation10.1016/j.elecom.2005.10.014 ↗
5. Critical overview of Nitinol surfaces and their modifications for medical applications10.1016/j.actbio.2008.01.013 ↗
6. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes10.1016/j.mser.2013.10.001 ↗
7. Atomic layer deposited Al2O3 films on NiTi shape memory alloys for biomedical applications10.1016/j.promfg.2019.12.070 ↗
8. Surface characterization of NiTi modified by plasma source ion implantation10.1016/S1359-6454(02)00251-3 ↗
9. Electrolytic processing of NiTi shape memory alloys10.1016/j.msea.2003.11.080 ↗
10. Preparation and characterization of TiO2 nanotube arrays on Ti6Al4V surface for enhancement of cell treatment10.1016/j.surfcoat.2017.05.016 ↗
11. Anodic oxidation of titanium and TA6V alloy in chromic media10.1016/S0013-4686(99)00283-2 ↗
12. Fabrication of open-ended TiO2 nanotube arrays by anodizing a thermally evaporated Ti/Au bilayer film10.1016/j.apsusc.2010.12.013 ↗
13. Lagoudas · 2008
14. Comparison of corrosion resistance and apatite-forming ability of NiTi treated by different low-temperature methods10.1149/1.2720768 ↗
15. Improvement in Corrosion Resistance of NiTi by anodization in acetic acid10.1016/j.matlet.2006.09.020 ↗
16. The influence of surface roughness and high pressure torsion on the growth of anodic titania nanotubes on pure titanium10.1016/j.apsusc.2016.07.036 ↗
17. Achieving homogeneous anodic TiO2 nanotube layers through grain refinement of the titanium substrate10.1016/j.matdes.2016.07.144 ↗
18. TiO2 nanotubes grown on Ti substrates with different microstructure10.1016/j.materresbull.2018.03.036 ↗
19. Self-organized double-wall oxide nanotube layers on glass-forming Ti-Zr-Si(-Nb) alloys10.1016/j.msec.2016.08.068 ↗
20. Effect of nanostructured titanium onanodization growth of self-organized TiO2 nanotubes
21. The effect of cold rolling and annealing on microstructure and tensile properties of the nanostructured Ni50Ti50 shape memory alloy10.1016/j.msea.2014.03.128 ↗
22. Performance of anaerobic fluidized bed microbial fuel cell with different porous anodes10.1016/j.cjche.2019.10.002 ↗
23. Thickness-conversion ratio from titanium to TiO2 nanotube fabricated by anodization method10.1016/j.matlet.2007.06.058 ↗
24. Fabrication of Ni-Ti-O nanotube arrays by anodization of NiTi alloy and their potential applications10.1038/srep07547 ↗
25. Current understanding of Ti anodization: fundamental, morphological, chemical and mechanical aspects10.1515/CORRREV.2009.27.3.117 ↗
26. A theory of avalanche breakdown during anodic oxidation10.1016/0013-4686(87)85032-6 ↗
27. Electrical and mechanical breakdown of anodic films on tungsten in aqueous electrolytes10.1016/0022-0728(88)85154-4 ↗
28. Corrosion resistance of ultra-fine-grained Ti10.1016/j.scriptamat.2004.04.011 ↗