journal article·2022-01

In-situ generation of Au nanoparticles in poly(methyl methacrylate) films via MeV proton irradiation

Oleksandr Romanenko, Petr Slepička, Ondřej Kvítek, Miroslav Šlouf, Pavel Němecek, Vladimír Havránek, Anna Macková, Václav Švorčík

Publisher page

Abstract

Abstract It has been shown that a radiation-sensitive polymer such as PMMA, which is widely utilised in lithography as a positive resist, can be used to create a flexible nanocomposite with metal nanoparticles by proton irradiation without any additional treatment. Three 50-μm-thick free-standing polymer films with 4, 10 and 16 wt% of gold were prepared with the spin-coating technique from a mixture of PMMA and hydrogen tetrachloroaurate trihydrate and irradiated with 2-MeV protons. Fluences in the range of 2 × 1013–2 × 1014 protons/cm2 were used to reduce gold ions to neutral metal atoms with the subsequent formation of nanoparticles. UV–Vis and FTIR spectroscopy was employed to study the Au-nanoparticle coalescence after the radiation modification. AFM and SEM microscopy showed the morphology of the nanoparticles on the polymer surface, while TEM microscopy was used to visualise the nanoparticles formed inside the polymer. It was found that the fluence of the Au-nanoparticle formation can be lower than that used in proton-beam lithography on PMMA. Although the free-standing foil allowed generated gases to diffuse from both sides, it did not withstand the high fluence applied to it on the substrate. The concentration of the generated nanoparticles depended both on the primary Au-atom concentration in the PMMA matrix and on the proton irradiation fluence used. In Au–PMMA composites containing 10 and 16 wt% of gold, the fluence of 2 × 1013 protons/cm2 was enough to produce a sufficient amount of nanoparticles to obtain the resonance absorption of light, whereas the sample with 4 wt% of gold required a higher proton fluence to exhibit Au-atom coalescence. It has been ascertained that the amount of the nanoparticles synthesized by proton irradiation is directly proportional to the concentration of gold in PMMA and to the proton fluence used. As for the size of the nanoparticles, it is directly proportional to the concentration of gold in PMMA, but inversely proportional to the fluence used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Ion-surface interactions and analysis · Advancements in Photolithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The golden age: gold nanoparticles for biomedicine10.1039/C1CS15237H ↗
2. Effect of nanoparticle shape on the conductivity of Ag nanoparticle poly(vinyl alcohol) composite films10.1002/pi.5906 ↗
3. Polymer-based nanocomposites for organic optoelectronic devices10.1016/j.surfcoat.2011.07.010 ↗
4. Upconversion nanocomposite materials with designed thermal response for optoelectronic devices10.3389/fchem.2019.00083 ↗
5. Improvement of reliability of polymer nanocomposite based transparent memory device by oxygen vacancy rich ZnO nanorods10.1016/j.mee.2016.04.027 ↗
6. Electrical memory devices based on inorganic/organic nanocomposites10.1038/am.2012.32 ↗
7. A new nonvolatile bistable polymer-nanoparticle memory device
8. Enhanced photocatalytic activity and photoresponse of poly(3,4-ethylenedioxythiophene) nanofibers decorated with gold nanoparticle under visible light10.1016/j.solener.2017.11.036 ↗
9. Catalytic performance of the in situ synthesized palladium-polymer nanocomposite10.1039/C5NJ02689J ↗
10. Polymer nanocomposites for photocatalytic applications10.3390/catal9120986 ↗
11. Control of optical absorption of silica glass by Ag ion implantation and subsequent heavy ion irradiation10.1088/1361-6528/abaadf ↗
12. Si-nanoparticle synthesis using ion implantation and MeV ion irradiation
13. Synthesis of gold nanoparticles by reduction of HAuCl4 under UV irradiation10.1016/j.solidstatesciences.2012.09.002 ↗
14. Formation of gold nanoparticles in polymethylmethacrylate by UV irradiation10.1088/0022-3727/40/12/032 ↗
15. Au nanoparticles in PMMA matrix: in situ synthesis and the effect of Au nanoparticles on PMMA conductivity10.1016/j.apsusc.2010.04.060 ↗
16. Synchrotron X-ray synthesis of colloidal gold particles for drug delivery10.1016/j.matchemphys.2005.12.007 ↗
17. γ-Irradiation-induced preparation of Ag and Au nanoparticles and their characterizations10.1016/j.matchemphys.2007.04.069 ↗
18. A review on radiation-induced nucleation and growth of colloidal metallic nanoparticles10.1186/1556-276X-8-474 ↗
19. Photopatterning of PMMA films with gold nanoparticles: diffusion of AuCl4- ions10.1021/jp106672f ↗
20. Synthesis of metal nanoparticles and patterning in polymeric films induced by electron nanobeam10.1021/acs.jpcc.6b12543 ↗
21. Synthesis of silver nanoparticles by electron irradiation of silver acetate10.1016/j.nimb.2006.06.019 ↗
22. Focused high energy proton beam micromachining: a perspective view10.1016/S0168-583X(99)00513-3 ↗
23. Dose rate and irradiation time effects on the shape of Au nanomaterials under proton beam irradiation10.1088/0957-4484/18/44/445603 ↗
24. Performance and application of heavy ion nuclear microbeam facility at the Nuclear Physics Institute in Řež, Czech Republic
25. Microcapacitors on graphene oxide and synthetic polymers prepared by microbeam lithography10.1016/j.apsusc.2020.146802 ↗
26. 2016
27. Resist materials for proton beam writing: a review10.1016/j.apsusc.2014.04.147 ↗
28. Deep light ion lithography in PMMA - a parameter study10.1016/S0168-583X(97)00449-7 ↗
29. Proton beam writing of microstructures at the ion nanoprobe LIPSION10.1016/j.nimb.2006.04.083 ↗
30. Electroforming of Ni mold for imprint lithography using high-aspect-ratio PMMA microstructures fabricated by proton beam writing
31. http://srim.org.
32. Optical properties of polymer nanocomposites10.1007/s12034-008-0038-9 ↗
33. The vibrational spectrum of poly(methyl methacrylate): a review10.1080/03602558208067727 ↗
34. Structural modification of poly(methyl methacrylate) by proton irradiation10.1016/S0169-4332(00)00699-1 ↗
35. Surface plasmon resonance in gold nanoparticles: a review10.1088/1361-648X/aa60f3 ↗
36. Synthesis of size and shape-selective Au nanocrystals via proton beam irradiation10.1016/j.nimb.2006.01.005 ↗
37. Radiation-induced synthesis of mono- and multi-metallic clusters and nanocolloids10.1039/a801445k ↗
38. Spectral properties and relaxation dynamics of surface plasmon electronic oscillations in gold and silver nanodots and nanorods10.1021/jp9917648 ↗
39. Ion beam synthesis of Ni nanoparticles embedded in quartz
40. Gold-poly(methyl methacrylate) nanocomposite films for plasmonic biosensing applications10.3390/polym3041833 ↗
41. In situ synthesis of gold nanoparticles in polymer films under concentrated sunlight: control of nanoparticle size and shape with solar flux10.1039/C9RE00439D ↗
42. Unravelling kinetic and thermodynamic effects on the growth of gold nanoplates by liquid transmission electron microscopy10.1021/acs.nanolett.5b00140 ↗
43. Gwyddion: an open-source software for SPM data analysis
44. ImageJ