journal article·2021-11

A comprehensive evaluation of non-isothermal simultaneous reduction and carburization kinetics of W-Ni oxide nano-composite powder

Hurieh Mohammadzadeh, Mansoor Barati

Publisher page

Abstract

Abstract Chemical co-precipitation of NiO-WO3, followed by reduction and carburization in CO-CO2 were carried out non-isothermally in a thermogravimetric analyzer at different heating rates of 5–15 °C/min to yield a Ni-WC composite with 12 wt% Ni. The kinetics of the thermochemical process was evaluated by Kisinger-Akarira-Sunese (KAS) method. It was found that the process is completed through four steps with distinctly dominant reduction/carburization reaction in each step, in the following order NiO→Ni, WO3→WO2, WO2→W and W→WC. The apparent activation energies (Ea) corresponding to these steps were 173, 146, 123 and 60 kJ/mol, respectively. The mechanism prevailing each step were elucidated using the master plot fittings method for various kinetic models, showing that the Avrami-Erofeev models of various order explained all the reaction steps with an exception of an interface-controlled reaction taking over a small portion of the WO3→WO2 step. The effect of heating rate on kinetic model was evaluated as well. The study presents a comprehensive picture of the reaction scheme and kinetics for the system, allowing for controlled design and synthesis of Ni-WC nano-composite powders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal and Kinetic Analysis · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Synthesis WSi2 coating on W substrate by HDS method with various deposition times10.1016/j.apsusc.2020.145551 ↗
2. Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying10.1016/S0040-6090(01)00805-7 ↗
3. Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions10.1016/j.apsusc.2014.11.059 ↗
4. Experimental investigation into the hole quality in ultrasonic machining of WC-Co composite10.1080/10426914.2014.995052 ↗
5. Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance10.1016/j.surfcoat.2007.06.048 ↗
6. Rapid sintering of ultrafine WC-Ni cermets10.1016/j.ijrmhm.2005.07.002 ↗
7. Oxidation of WC-Co, WC-Ni and WC-Co-Ni hard metals in the temperature range 500-800°C10.1016/0263-4368(96)00009-1 ↗
8. Performances of micro-textured WC-10Ni3Al cemented carbides cutting tool in turning of Ti6Al4V10.1016/j.ijrmhm.2019.104987 ↗
9. Modeling the effect of flatter shape of WC crystals on the hardness of WC-Ni cemented carbides10.1016/j.ijrmhm.2008.07.008 ↗
10. Fabrication of in situ Ni(W)-WC nano composites via mechanical alloying and spark plasma sintering10.1016/j.jallcom.2012.07.085 ↗
11. Powder refinement, consolidation and mechanical properties of cemented carbides - an overview10.1016/j.powtec.2014.04.024 ↗
12. Isothermal kinetics of reduction and carburization of WO3–NiO nanocomposite powder by CO/CO210.1007/s10973-016-5883-y ↗
13. Reduction and carburization behavior of NiO-WO3 mixtures by carbon monoxide10.1016/j.tca.2014.07.003 ↗
14. Fabrication of nanostructured powders by chemical processes10.1016/S1359-6462(01)00896-X ↗
15. Synthesis and characterization of WC-Co nanocomposites by novel chemical method10.1016/j.ceramint.2005.09.010 ↗
16. Fabrication and applications of nickel selenide10.1016/j.jssc.2019.06.015 ↗
17. Study of WO 3 –In 2 O 3 nanocomposites for highly sensitive CO and NO 2 gas sensors10.1016/j.jssc.2019.02.023 ↗
18. Gas-condensed phase reactions - a novel route to synthesize alloys and intermetallics involving refractory metals10.1016/j.matpr.2016.09.008 ↗
19. Reduction of CuO and Cu2O with H2: H embedding and kinetic effects in the formation of suboxides10.1021/ja0301673 ↗
20. Simultaneous reduction nitridation for the synthesis of tungsten nitrides from Ni-W-O precursors10.1179/1743290113Y.0000000061 ↗
21. Preparation of WC-Co powder by direct reduction and carbonization10.1016/S1672-2515(07)60203-6 ↗
22. Preparation of alumina-tungsten carbide nanocomposite by mechano-chemical reduction of WO3 with aluminum and graphite10.1016/j.jallcom.2009.11.019 ↗
23. Preparation of ultrafine W-10 Wt pct Cu composite powders and their corresponding sintered compacts10.1007/s11661-019-05390-y ↗
24. LaMer's 1950 model of particle formation: a review and critical analysis of its classical nucleation and fluctuation theory basis, of competing models and mechanisms for phase-changes and particle formation, and then of its application to silver halide, s10.1039/D0MA00439A ↗
25. Steering charge kinetics in photocatalysis: intersection of materials syntheses, characterization techniques and theoretical simulations10.1039/C5CS00064E ↗
26. Comprehensive evaluation of formation kinetics in preparation of ternesite from different polymorphs of Ca2SiO410.1016/j.jssc.2020.121725 ↗
27. Isothermal and non-isothermal precipitation kinetics in Al–Mg–Si-(Ag) alloy10.1016/j.matchemphys.2019.122073 ↗
28. Synthesis of WC-Ni composite powders by thermochemical processing method based on co-precipitation10.1016/j.matchemphys.2014.09.057 ↗
29. Electroplating of non-fluorinated superhydrophobic Ni/WC/WS2 composite coatings with high abrasive resistance10.1016/j.apsusc.2019.05.244 ↗
30. Impact of environment on the kinetics involved in the solid-state synthesis of bismuth ferrite10.1016/j.matchemphys.2019.05.055 ↗
31. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data10.1016/j.tca.2011.03.034 ↗
32. Gautam · 2020
33. Iron removal from ultra-fine silicon carbide powders with ultrasound-assisted and its kinetics10.1016/j.matchemphys.2020.122860 ↗
34. Hydrogen reduction behavior and microstructural characteristics of WO3 and WO3-NiO powders10.1016/j.ijrmhm.2018.12.013 ↗
35. Non-isothermal reduction kinetics of Fe2O3-NiO composites for formation of Fe-Ni alloy using carbon monoxide10.1016/S1003-6326(14)63519-6 ↗
36. Kinetics of NiO reduction by H2 and Ni oxidation at conditions relevant to chemical-looping combustion and reforming10.1016/j.ijhydene.2014.03.161 ↗
37. Reduction kinetics for Fe2O3/NiO-doped compound in a methane atmosphere10.1016/j.jallcom.2017.11.017 ↗
38. Temperature-Programmed and X-ray diffractometry studies of WO3 reduction by carbon monoxide10.4028/www.scientific.net/AMR.1087.73 ↗
39. Temperature-programmed and X-ray diffractometry studies of hydrogen-reduction course and products of WO3 powder: influence of reduction parameters10.1016/j.tca.2011.05.004 ↗
40. Kinetics of cooperative CO2adsorption in diamine-appended variants of the metal-organic framework Mg2(dobpdc)10.1039/D0SC01087A ↗
41. Effects of precursor rooted contamination in the sintering and densification behavior of thermo-chemically manufactured W-CU nanocomposites10.1142/S0217979210064113 ↗
42. Synthesis of WC-20 wt. % Cu composite powders by co-precipitation and carburization processes
43. Kinetics of nonisothermal reduction and carburization of WO 3 ─NiO nano-composite powders by CO─CO 210.1002/kin.21269 ↗
44. Reduction-carburization of NiO-WO3 under isothermal conditions Using H2-CH4 gas mixture10.1007/s11663-009-9307-2 ↗
45. An investigation about the activation energies of the reduction transitions of fine dispersed CuWO4-x/WO3-x oxide powders10.1016/j.ijrmhm.2009.12.003 ↗
46. Advanced isoconversional and master plot analyses on non-isothermal degradation kinetics of AlN (nano)-reinforced HDPE composites10.1007/s10973-016-5406-x ↗
47. Simple synthesis, kinetics and thermodynamics of rod-like Cu2(OH)PO4 microparticles and rod-like Cu4O(PO4)2 nanoparticles10.1016/j.matchemphys.2020.123158 ↗
48. Thermal analysis of pharmaceuticals10.1002/cmdc.200800161 ↗
49. Toft Sørensen · 2003
50. House · 2007
51. Li · 2018
52. Kinetic study and thermal decomposition behavior of lignite coal10.1155/2015/481739 ↗