Variation in nanopillar surface on plasma-etched stainless steel owing to the crystal phase and composition
Source abstract
Abstract
Abstract Argon (Ar) plasma etching of stainless steel leads to the formation of nanopillars that function as an antibacterial surface. This study investigated the influences of the crystal phase and composition of steel on nanopillar characteristics, aiming to produce an effective antibacterial surface. Nanopillars on the ferritic stainless steel surface with a body-centered cubic (BCC) structure showed a higher number density, compared with the austenitic case with a face-centered cubic structure. In addition, the number density of the pillars decreased in the cases of lower C and higher Cr contents of the stainless steel. Such differences were dominated by the behavior of carbide precipitation, which acted as a template for etching. Stainless steels with BCC structures and a low Cr content are advantageous for carbide formation; in contrast, a low C content is a disadvantage for the formation of nanopillars owing to the absence of a carbide source. The nanopillar surfaces exhibited antibacterial activity against the gram-positive Staphylococcus epidermidis species, but the effect was mitigated for stainless steel with a reduced number density. The crystal structure and chemical composition of stainless steels influence their antibacterial activity; hence, plasma etching conditions must be optimized for stainless steel to produce an effective antibacterial surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Natural bactericidal surfaces: mechanical rupture of pseudomonas aeruginosa cells by cicada wings10.1002/smll.201200528 ↗
2. Cicada wing surface topography: an investigation into the bactericidal properties of nanostructural features10.1021/acsami.5b08309 ↗
3. Bactericidal effects of natural nanotopography of dragonfly wing on Escherichia coli10.1021/acsami.6b13666 ↗
4. Pillars of life: is there a relationship between lifestyle factors and the surface characteristics of dragonfly wings?10.1021/acsomega.8b00776 ↗
5. Origins and evolution of antibiotic resistance10.1128/MMBR.00016-10 ↗
6. Co-selection of antibiotic and metal resistance10.1016/j.tim.2006.02.006 ↗
7. Heavy metal resistance in bacteria from animals10.1016/j.rvsc.2018.11.007 ↗
8. Microbiological corrosion: mechanism, control and impact–a review10.1007/s00170-017-0494-8 ↗
9. Bacterial adherence and biofilm formation on medical implants: a review10.1177/0954411914556137 ↗
10. Bacterial biofilms in food processing environments: a review of recent developments in chemical and biological control10.1111/ijfs.13159 ↗
11. Biomimetic surface coatings for marine antifouling: natural antifoulants, synthetic polymers and surface microtopography10.1016/j.scitotenv.2020.144469 ↗
12. Bactericidal activity of black silicon10.1038/ncomms3838 ↗
13. Bio-mimicking nano and micro-structured surface fabrication for antibacterial properties in medical implants10.1186/s12951-017-0306-1 ↗
14. Bacterial interactions with nanostructured surfaces10.1016/j.cocis.2018.10.007 ↗
15. Nanopatterned polymer surfaces with bactericidal properties10.1116/1.4922157 ↗
16. Changes in roughness factors of 304 and 316 L + N stainless steels with ion bombardment and discharge cleaning10.1016/0022-3115(80)90191-9 ↗
17. Effect of plasma nitriding on the strength of fine protrusions formed by sputter etching of AISI type 420 stainless steel10.1016/j.surfcoat.2015.03.048 ↗
18. Fabrication of antibacterial nanopillar surface on AISI 316 stainless steel through argon plasma etching with direct current discharge10.1016/j.surfcoat.2020.126680 ↗
19. Superhydrophobicity produced by vapor deposition of a hydrophobic layer onto fine protrusions formed by sputter-etching of steels10.1016/j.surfcoat.2012.09.001 ↗
20. Surface characteristics and cell-adhesion performance of titanium treated with direct-current gas plasma comprising nitrogen and oxygen10.1016/j.apsusc.2015.02.153 ↗
21. Selective bactericidal activity of nanopatterned superhydrophobic cicada Psaltoda claripennis wing surfaces10.1007/s00253-012-4628-5 ↗
22. Bacterial-nanostructure interactions: the role of cell elasticity and adhesion forces10.1016/j.jcis.2019.03.050 ↗
23. Irradiation-induced grain boundary chromium microchemistry in high alloy ferritic steels10.1016/j.scriptamat.2008.01.004 ↗
24. Microstructural evolution of P92 ferritic/martensitic steel under argon ion irradiation10.1016/j.matchar.2010.11.015 ↗
25. Ion irradiation-induced precipitation of Cr23C6 at dislocation loops in austenitic steel10.1016/j.scriptamat.2012.10.002 ↗
26. Influence of Ar implantation on the precipitation in Au ion irradiated AISI 316L solution annealed alloy10.1557/adv.2018.414 ↗
27. Microstructure evolution of modified 310S austenitic stainless steels under argon ion irradiation at different temperatures10.1016/j.nimb.2019.08.016 ↗
28. Growth of oxide layers on NiTi alloy surfaces through anodization in nitric acid electrolyte10.1016/j.surfcoat.2017.06.021 ↗
29. Corrosion prevention of aluminum nanoparticles by a polyurethane coating10.3390/ma7064710 ↗
30. Carbon diffusion in carbon-supersaturated ferrite and austenite10.1016/j.jallcom.2013.10.058 ↗
31. Diffusion of carbon in stainless steels10.1016/0022-3115(70)90060-7 ↗
32. Carbon paraequilibrium in austenitic stainless steel10.1007/s11661-006-0124-9 ↗
33. Resistance to sensitization and intergranular corrosion through extreme randomization of grain boundaries10.1016/S1359-6454(02)00306-3 ↗
34. Effect of alloy composition on carburizing performance of steel10.1007/s11669-009-9500-7 ↗
35. An empirical model for carbon diffusion in austenite incorporating alloying element effects10.2355/isijinternational.51.1903 ↗
36. Deciphering the roles of interspace and controlled disorder in the bactericidal properties of nanopatterns against Staphylococcus aureus10.3390/nano10020347 ↗
37. The multi-faceted mechano-bactericidal mechanism of nanostructured surfaces10.1073/pnas.1916680117 ↗
38. Tuning antimicrobial properties of biomimetic nanopatterned surfaces10.1039/C8NR00439K ↗
39. Bactericidal mechanism of nanopatterned surfaces10.1039/C5CP05646B ↗