journal article·2021-09

Wetting behavior and interfacial characteristic of Ti32.8Zr30.2Cu9Ni5.3Be22.7/Ti55 alloy system

Guofeng Ma, Shu Lv, Zhiying Lu, Xiaolai Li, Ziyao Wang

Publisher page

Abstract

Abstract The wetting behavior and the interfacial characterization of Ti32.8Zr30.2Cu9Ni5.3Be22.7 (denoted as ZT3) bulk metallic glass (BMG) alloy and Ti55 substrate were investigated by the sessile drop method at 1023–1223K in a high vacuum. We found that the system had the final equilibrium contact angle around 40°, 27°, 24°, 20° and 18° at the corresponding experimental temperatures. During the experiment, elements in the substrate diffused upward and formed an interfacial layer at the interface, and then the dendritic phase formed in the cooling process. The thickness of the interfacial layer and the height of the dendrite increased with the increasing experimental temperature. Ti and Zr elements are the main components of the interfacial layer. XRD and EDS results show that the compositions of the interface layer are β-Ti (Zr, Cu, Al), which is different from that of droplet and substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Cultural and Historical Studies · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. The structure and nanomechanical properties of amorphous welds made at reduced temperature
2. Processing of bulk metallic glass10.1002/adma.200902776 ↗
3. Dendrite size dependence of tensile plasticity of in situ Ti-based metallic glass matrix composites10.1016/j.jallcom.2013.08.201 ↗
4. In situ crystallization and enhanced mechanical properties of the Zr41. 2Ti13. 8Cu12. 5Ni10Be22. 5 alloy by cold rolling10.1016/j.jnoncrysol.2005.04.070 ↗
5. Formation of high strength in-situ bulk metallic glass composite with enhanced plasticity in Cu50 Zr47. 5 Ti2. 5 alloy10.2320/matertrans.46.730 ↗
6. TiZr-base bulk metallic glass with over 50 mm in diameter10.1016/S1005-0302(10)60077-1 ↗
7. Wetting behaviors and interfacial characteristics of TiZr-based bulk metallic glass/W substrate10.1016/j.jallcom.2012.09.066 ↗
8. Wetting behaviors and interfacial characteristics of molten AlxCoCrCuFeNi high-entropy alloys on a WC substrate10.1016/j.jmst.2020.10.067 ↗
9. Wetting and spreading behaviors of Al-Si alloy on surface textured stainless steel by ultrafast laser
10. Energy solution method of Young's equation and calculation model of contact angle
11. Growth kinetics for intermetallic compound layer between molten In-Sn alloy and CuZr-based bulk metallic glass10.1016/S1003-6326(11)61253-3 ↗
12. Wetting behavior of molten In-Sn alloy on bulk amorphous and crystalline Cu40Zr44Al8Ag810.1063/1.2804559 ↗
13. Influence of structural relaxation on wetting behavior of molten In-Sn alloy on Cu40Zr44Al8Ag8 bulk metallic glass10.1016/j.jallcom.2011.10.034 ↗