journal article·2018-08

Effect of post-annealing in low oxidizing atmosphere on the properties of CeO 2 buffer layer for coated conductors

Y. Wang, C.S. Li, J.Q. Feng, L.H. Jin, Z.M. Yu, L. Gao, H. Wang

Publisher page

Abstract

Abstract CeO2-x thin films have been fabricated by chemical solution deposition (CSD) technique on bi-axial textured Ni5W substrates. The effect of post-annealing in moderate oxidizing atmosphere on the structure and texture of the film has been studied by varying temperature and CO2 concentration during the post-annealing process. The results show that the structure and texture stability of the CeO2-x film is heavily dependent on the post-annealing temperature. A high post-annealing temperature could lead to the change of cerium valence and even oxidation of Ni5W substrate. In addition, an excess amount of CO2 could cause the degeneration of texture degree and surface flatness of CeO2-x film because of the increase of oxygen vacancy defects and the production of carbonates. Except effective removal of residual carbon in films, therefore, the production of both the oxygen vacancy concentration and carbonates should be greatly controlled to improve the texture degree and surface flatness of CeO2-x films by adjusting the concentration of oxidizing gas and the heat-treatment temperature during the post-annealing process or the YBCO deposition process. Moreover, the CeO2-x film post-annealed at 700 °C in the mixture atmosphere with 1% CO2 show sharper texture and smoother surface because of the existence of small amount of oxygen vacancy and carbonates compared with the as-prepared sample.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · ZnO doping and properties · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Enhanced structural and morphological properties of Gd-doped CeO2 thin films obtained by polymer-assisted deposition10.1016/j.matlet.2014.03.119 ↗
2. Preparation and characterization of Ce0.8M0.2O2-d (M=Y, Gd, Sm, Nd, La) solid electrolyte materials for solid oxide fuel cells10.1016/j.ijhydene.2009.10.093 ↗
3. Nanostructural control in solution-derived epitaxial Ce1−xGdxO2−y films10.1088/0957-4484/19/39/395601 ↗
4. Sintering and grain growth of CoO-doped CeO2 ceramics10.1016/S0955-2219(01)00240-0 ↗
5. Structural characteristics of cerium oxide nanocrystals prepared by the microemulsion method10.1021/cm010235p ↗
6. Epitaxial growth of CeO2 thin film on cube textured NiW substrate using a propionate-based metalorganic deposition (MOD) method10.1016/j.matchemphys.2012.01.092 ↗
7. Metal-organic deposition of biaxially textured CeO2–based buffer layers10.1016/j.matlet.2009.01.038 ↗
8. Effect of polymer inclusion in preparation of thick LZO buffer layers for YBCO coated conductors10.1016/j.jmst.2012.12.020 ↗
9. Interlayer structure in YBCO-coated conductors prepared by chemical solution deposition
10. Improving superconducting properties of YBCO high temperature superconductor by Graphene Oxide doping10.1016/j.matchemphys.2017.03.003 ↗
11. Effect of oxygen partial pressure on the crystallization of CeO2 and La2Zr2O7 bi-axially textured thin films10.1016/j.jcrysgro.2011.06.008 ↗
12. Effective removal procedure of residual carbon in CeO2-x films fabricated via MOD method10.1016/j.ceramint.2015.07.057 ↗
13. Nitrate-based metalorganic deposition of CeO2 on yttria-stabilized zirconia10.1557/jmr.2006.0022 ↗
14. Kroschwitz · 1993
15. Some notes on XPS Ce3d spectra of cerium-bearing catalysts10.1016/j.cej.2011.01.085 ↗
16. Huang · 2007 · 199
17. Effect of processing conditions and methods on residual stress in CeO2 buffer layers and YBCO superconducting films10.1016/j.physc.2006.05.024 ↗
18. Optimization of electrochemical synthesis conditions for dense and doped ceria thin films10.1016/j.electacta.2009.07.003 ↗
19. Transient thermal stress analysis of CeO2 thin films on Ni substrates using finite element methods for YBCO coated conductor10.1016/j.matdes.2005.09.012 ↗
20. Comparative study on the crack formations in the CeO2 buffer layers for YBCO films on textured Ni tapes and Pt tapes10.1016/S0921-4534(98)00412-2 ↗
21. Growth of biaxially textured buffer layers on rolled-Ni substrates by electron beam evaporation10.1016/S0921-4534(96)00713-7 ↗
22. In situ small-angle neutron scattering study of La2Zr2O7 and SrZrO3 ceramics for thermal barrier coatings10.1016/j.scriptamat.2006.05.022 ↗