journal article·2016-03

Inhibition of grain growth by MgO in laser-melted Al2O3 capillary microstructure

Takuya Honma, Junichi Tatami

Publisher page

Abstract

Abstract In this study, ceramic-metal (Al 2 O 3 –Nb) sealing was performed by melting an Al 2 O 3 capillary with Nd:YAG laser irradiation while using MgO as a grain-growth inhibitor. The effect of MgO on annealing during the cooling step was that it effectively prevented the formation of the extremely large voids that are typically formed in melted Al 2 O 3 capillaries by the decomposition of the sintered body. The solidification process is accompanied by the formation of grain boundaries, which causes the vapors generated by melting to diffuse along the grain boundary paths during annealing at the cooling step. However, the grains closer to the laser irradiation spot were larger than those further away, owing to variations in the distribution of MgO throughout the capillary structure. This phenomenon was due to the difference in the distribution of the temperature during the sealing process. Though grain growth was suppressed in the regions away from the laser irradiation spot, coarse grains were formed within the laser-irradiated region itself.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Bonding mechanism between alumina and niobium10.1007/BF00542374 ↗
2. Ceramic/metal joining for structure and materials
3. Alumina ceramic-to-metal seals by the “Mo process”10.2109/jcersj1950.81.931_108 ↗
4. Sapphire to metal seal by reactive alloying method10.2109/jcersj1950.78.902_350 ↗
5. Microstructure of seal formed between a Nb wire and an Al2O3 capillary melted by YAG laser radiation10.1016/j.ceramint.2012.11.079 ↗
6. CO2 laser welding of ceramics (report 1)10.2207/qjjws1943.51.182 ↗
7. Levin · 1964 · 37
8. High-temperature vaporization behavior of oxides II. Oxides of Be, Mg, Ca, Sr, Ba, B, Al, Ga, In, Tl, Si, Ge, Sn, Pb, Zn, Cd, and Hg10.1063/1.555799 ↗
9. Laser control melting of alumina surfaces and thermal stress analysis10.1016/j.optlastec.2010.10.009 ↗
10. Transparent ceramic lamp envelope materials10.1088/0022-3727/38/17/S07 ↗
11. Critical grain size/preexisting flaw size relations in anisotropic brittle solids10.1111/j.1151-2916.1983.tb10538.x ↗
12. Fracture of brittle solids in the presence of thermoelastic stresses10.1111/j.1151-2916.1984.tb19599.x ↗
13. Vapour pressure equations for the metallic elements: 298–2500K10.1179/cmq.1984.23.3.309 ↗
14. Using aluminum for space propulsion10.2514/1.5132 ↗