Bioceramic calcium phosphate-polymer scaffolds: A promising strategy for osteochondral repair and regenerative medicine
Source abstract
Abstract
The study's objective was to fabricate a porous scaffold with desirable biological and bioactive characteristics, utilizing freeze-drying with polyvinyl alcohol (PVA). Subsequently, compressive strength tests and simulated body fluid (SBF) soaking experiments were performed to assess the mechanical and biological properties of the scaffold. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used for analyzing the scaffolds. The findings indicated that an increase in the amount of dicalcium phosphate decreased the porosity of the scaffold from 76% to 64%, raised the compressive strength from 2.48 MPa to 4.8 MPa, and lowered the dissolution rate from 39% to 24%. These changes led to an improvement in the scaffold's chemical bonding and stability. According to micromechanical models, the optimal scaffold composition was found to be 10 wt% of dicalcium phosphate in a polyvinyl alcohol mixture with constant drug content. Moreover, an increase in the dicalcium phosphate content led to an elevation in the drug release percentage due to the reduction in porosity and an increase in the drug release rate. The data were analyzed by using various kinetic models through diagrams generated by a UV device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Encapsulation of antioxidant phenolic compounds extracted from spent coffee grounds by freeze-drying and spray-drying using different coating materials10.1016/j.foodchem.2017.05.142 ↗
2. The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering10.1016/j.biomaterials.2009.09.063 ↗
3. Physicochemical characterization and biocompatibility in vitro of biphasic calcium phosphate/polyvinyl alcohol scaffolds prepared by freeze-drying method for bone tissue engineering applications10.1016/j.colsurfb.2012.04.046 ↗
4. Effect of interstand tensions on lubrication regime in cold strip rolling with O/W emulsion10.1080/10402004.2018.1536238 ↗
5. Forouzan · 2009
6. Synthesis and characterization of bioscaffolds using freeze drying technique for bone regeneration10.1016/j.bcab.2019.101184 ↗
7. Chitosan/hydroxyapatite composite bone tissue engineering scaffolds with dual and decoupled therapeutic ion delivery: copper and strontium10.1039/C9TB00897G ↗
8. Fabrication of porous bone scaffolds using alginate and bioactive glass10.3390/jfb10010015 ↗
9. Hydroxyapatite/mesoporous graphene/single‐walled carbon nanotubes freestanding flexible hybrid membranes for regenerative medicine10.1002/adfm.201602088 ↗
10. Highly macroporous chitosan/agarose/HA bone scaffold produced by combination of freeze-drying with gas-foaming agent
11. Preparation and characterization of PLA/PCL/HA composite scaffolds using indirect 3D printing for bone tissue engineering10.1016/j.msec.2019.109960 ↗
12. Silk fibroin/gelatin microcarriers as scaffolds for bone tissue engineering10.1016/j.msec.2019.110116 ↗
13. Calcium phosphates nanoparticles: the effect of freeze-drying on particle size reduction10.1016/j.matchemphys.2019.122004 ↗
14. Enhanced physical and biological properties of chitosan scaffold by silk proteins cross-linking10.1016/j.carbpol.2019.115529 ↗
15. Ordered arrangement of hydrated GdPO4 nanorods in magnetic chitosan matrix promotes tumor photothermal therapy and bone regeneration against breast cancer bone metastases10.1016/j.cej.2019.122694 ↗
16. Preparation and biological properties of a novel composite scaffold of nano-hydroxyapatite/chitosan/carboxymethyl cellulose for bone tissue engineering10.1186/1423-0127-16-65 ↗
17. Bio-composite scaffolds containing chitosan/nano-hydroxyapatite/nano-copper–zinc for bone tissue engineering10.1016/j.ijbiomac.2011.11.013 ↗
18. In vivo evaluation of porous hydroxyapatite/chitosan–alginate composite scaffolds for bone tissue engineering10.1016/j.ijbiomac.2012.08.027 ↗
19. Experimental investigation on tribological properties of carbon fabric composites: effects of carbon nanotubes and nano-silica
20. Effect of porosity on mechanical properties of 3D printed polymers: experiments and micromechanical modeling based on X-ray computed tomography analysis10.3390/polym11071154 ↗
21. The role of collagen in bone strength10.1007/s00198-005-2035-9 ↗
22. Physicochemical characterization and biocompatibility in vitro of biphasic calcium phosphate/polyvinyl alcohol scaffolds prepared by freeze-drying method for bone tissue engineering applications10.1016/j.colsurfb.2012.04.046 ↗
23. Cavelier · 2016
24. SEM sample preparation for cells on 3D scaffolds by freeze‐drying and HMDS10.1002/sca.20271 ↗
25. Effects of different crosslinking methods on the properties of collagen–calcium phosphate composite materials10.1016/j.ijbiomac.2014.12.023 ↗
26. Synthesis and characterization of macroporous chitosan/calcium phosphate composite scaffolds for tissue engineering10.1002/1097-4636(20010605)55:3<304::AID-JBM1018>3.0.CO;2-J ↗
27. Path planning and trajectroy tracking of a mobile robot using bio-inspired optimization algorithms and PID control
28. Macroporous bioglass scaffolds prepared by coupling sol–gel with freeze drying10.1021/cm103362c ↗
29. Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites10.1016/j.tafmec.2018.05.007 ↗
30. Effects of multi-walled carbon nanotube and nanosilica on tensile properties of woven carbon fabric-reinforced epoxy composites fabricated using VARIM10.1177/0021998317699982 ↗
31. Design of a multiphase osteochondral scaffold. I. Control of chemical composition10.1002/jbm.a.32415 ↗
32. Design of a multiphase osteochondral scaffold. I. Control of chemical composition10.1002/jbm.a.32415 ↗
33. Investigation of mechanical stability of lithium disilicate ceramic reinforced with titanium nanoparticles
34. Preparation of a chitin–apatite composite by in situ precipitation onto porous chitin scaffolds10.1002/(SICI)1097-4636(19980915)41:4<541::AID-JBM5>3.0.CO;2-C ↗
35. Analysis of amorphous structure with polycaprolactone-hydroxyapatite nanoparticles fabricated by 3D bioprinter technique for bone tissue engineering10.1016/j.ceramint.2023.01.203 ↗
36. Balancing mechanical strength with bioactivity in chitosan–calcium phosphate 3D microsphere scaffolds for bone tissue engineering: air-vs. freeze-drying processes10.1080/09205063.2012.735099 ↗
37. 3D plotting of growth factor loaded calcium phosphate cement scaffolds10.1016/j.actbio.2015.08.036 ↗
38. Biomimetic bone scaffolds based on chitosan and calcium phosphates10.1016/j.matlet.2011.02.077 ↗
39. Synthesis and characterization of porous κ-carrageenan/calcium phosphate nanocomposite scaffolds10.1007/s10853-007-1851-z ↗
40. Compressive strength and processing of camphene-based freeze cast calcium phosphate scaffolds with aligned pores10.1016/j.matlet.2009.04.013 ↗
41. Biomimetic apatite-coated PCL scaffolds: effect of surface nanotopography on cellular functions10.1177/0883911509349311 ↗
42. Thermal and X-ray analyses of aluminum–titanium nanocomposite powder10.1007/s10973-017-6570-3 ↗
43. Fabrication of in-situ foamed chitosan/β-TCP scaffolds for bone tissue engineering application10.1016/j.matlet.2012.07.002 ↗
44. Release kinetics and antimicrobial properties of the potassium sorbate-loaded edible films made from pullulan, gelatin and their blends10.1016/j.foodhyd.2019.105539 ↗
45. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
46. Development of 3D PVA scaffolds for cardiac tissue engineering and cell screening applications10.1039/C8RA08187E ↗
47. Preparation and characterization of homogeneous chitosan–polylactic acid/hydroxyapatite nanocomposite for bone tissue engineering and evaluation of its mechanical properties10.1016/j.actbio.2009.03.005 ↗
48. Preparation, characterization and biological test of 3D-scaffolds based on chitosan, fibroin and hydroxyapatite for bone tissue engineering10.1016/j.msec.2013.04.026 ↗
49. Adsorption and desorption of Pb (II) on l-lysine modified montmorillonite and the simulation of interlayer structure10.1016/j.clay.2018.12.017 ↗
50. Collagen-polyvinyl alcohol-indomethacin biohybrid matrices as wound dressings10.3390/pharmaceutics10040224 ↗
51. New insights into the capture performance and mechanism of hazardous metals Cr3+ and Cd2+ onto an effective layered double hydroxide based material10.1016/j.jhazmat.2021.128062 ↗
52. Long noncoding RNA p21 enhances autophagy to alleviate endothelial progenitor cells damage and promote endothelial repair in hypertension through SESN2/AMPK/TSC2 pathway10.1016/j.phrs.2021.105920 ↗
53. Construction and function of robust and moist bilayer chitosan-based hydrogel wound dressing10.1016/j.matdes.2023.111604 ↗
54. Surface-functionalized design of blood-contacting biomaterials for preventing coagulation and promoting hemostasis10.1007/s40544-022-0710-x ↗
55. YTHDF1 negatively regulates Treponema pallidum-induced inflammation in THP-1 macrophages by promoting SOCS3 translation in an m6A-dependent manner
56. Zhang · 2021
57. Phased array guided wave propagation in curved plates10.1016/j.ymssp.2022.109821 ↗
58. Unraveling of advances in 3D-printed polymer-based bone scaffolds10.3390/polym14030566 ↗
59. Numerical simulation of an entangled wire-silicone rubber continuous interpenetration structure based on domain meshing superposition method10.1016/j.compositesb.2023.110648 ↗
60. Investigating the performance of tricalcium phosphate bioceramic reinforced with titanium nanoparticles in friction stir welding for coating of orthopedic prostheses application10.1016/j.jmrt.2022.07.102 ↗
61. Synthesis, characterization, molecular docking, and biological activities of some natural and synthetic urolithin analogs10.1002/cbdv.202000197 ↗
62. Plant‐mediated synthesis of silver‐doped zinc oxide nanoparticles and evaluation of their antimicrobial activity against bacteria cause tooth decay10.1002/jemt.24207 ↗